WRC GT2.5 1 8 Scale Nitro 2WD On Road Car Instruction Manual
- October 30, 2023
- WRC
Table of Contents
WRC GT2.5 1 8 Scale Nitro 2WD On Road Car Instruction Manual
INTRODUCTION
GTDUE is a new generation high quality 1/8 scale nitro on road car. GTDUE is supplied in a box equipped with Instruction Manual. Its use is intended for more than 16 years old persons with experience on rc model car field. Children and all the persons without this requirement MUST have direct supervision of a knowledgeable adult responsible.
SAFETY PRECAUTIONS
Instruction Manual MUST be read and fully understood before to start building and operating functions. Always keep Instruction Manual in safety place, ready to be consulted for any reference you need. Use only original WRC spare parts.
GENERAL INFORMATION
Assemble the kit only away from the reach of children. Follow the building and operating instructions using the utmost care. Don’t put any part of your body inside rotating and moving elements as this may cause damage or serious injury. Check and clean the model before putting it away. Don’t use your model car in public places or in roads and areas where it could generate conflict with person or vehicular traffic. The model car is controlled by radio: you MUST put great care to avoid loss of radio control always keeping a safety margin all around your model in order to prevent any collision. Operating frequency: check and be sure it is clear and not shared with anybody at same time; it could cause loss of control of the RC model. Always turn on your transmitter before you turn on the receiver in the car and always turn off the receiver before you turn off your transmitter. Keep the wheels of the model off the ground when checking the operation of the radio equipment. Disconnect the battery pack before storing your model.
WARRANTY
WRC guarantees this model kit to be free from defects in both material and workmanship within 30 days of purchase. The total monetary value under warranty will in no case exceed the cost of the original kit purchased. This warranty doesn’t cover any compnents damaged by use or modification or as result of wear. Part or parts missing from this kit must be reported within 30 days of purchase. No part or parts will be sent under warranty without proof of purchase. If you find a defective or missing part, contact the local distributor. Customer service and support will be provided through local hobby store. No warranties are expressed or implied that cover damage caused by what is considered normal use or cover or imply how long any model cars’ components or electric components will last before requiring replacement. Due to the high performance level of this model car you will need to periodically maintain and replace consumable components; any and all warranty coverage will not cover replacement of any part or component damaged by neglect, abuse or improper or unreasonable use. This includes but is not limited to damage from crashing, excessive moisture, improper use or no maintenance or user modifications which compromise the integrity of components. Warranty will not cover components that are considered consumable on RC model car. WRC doesn’t pay nor refund on any component sent from WRC or its distributor for warranty. WRC reserves the right to make final determination of the warranty status of any component or part Use only original WRC spare part:
CUSTOMER SUPPORT
Please don’t hesitate to contact WRC support at info@wrc-racing.com for any
problem or question. Also kindly visit our website www.wrc-racing.com to find
last updates, set-up information, option parts and other information.
W.R.C. world racing car s.r.l.
Via A.Volta 2 Bis 36040 Brendola (VI)
ITALY
Phone: 0039 0 444 1792263
E-mail: info@wrc-racing.com
Website: www.wrc-racing.com
TECHNICAL INFORMATION
– BODY: PROTOTIPE MODEL (NOT INCLUDED)
– ADJUSTABLE FRONT TOE, CAMBER AND CASTER
– ADJUSTABLE REAR TOE AND CAMBER
– BUMPER /FRONT BACKSTOP
– ALUMINUM CHASSIS
– FULL BALL BEARING
– CARBON RADIO PLATE
– TRANSMISSION: 2WD
– REAR DIFFERENTIAL: GEAR DIFFERENTIAL
TECHNICAL DATA
– LENGHT ………………………………………435 MM.
– WIDTH ………………………………………264 MM.
– WHEEL BASE ……………………………….300 MM.
– WEIGHT CHASSIS………………………..2080 GR.
REQUIRED BUT NOT INCLUDED IN THE KIT
ADDITIONAL ITEMS NEEDED FOR COMPLETION
TOOLS REQUIRED
THESE TOOLS ARE NOT INCLUDED IN THE KIT BUT ARE REQUIRED FOR PROPER ASSEMBLY
NOTICE:
THE FOLLOWING ITEMS ARE NEEDED FOR COMPLETION OF THE GT2; THEY ARE NOT
INCLUDED IN THIS KIT (UNLESS NOTED) AND SHOULD BE OBTEINED FROM YOUR LOCAL
HOBBY SHOP. BE SURE TO READ THE INSTRUCTION COMPLETELY PRIOR TO ASSEMBLY
TENSION BELT REGULATION
SETUP SHEET
