WRC F22.1 Electric Formula RC Car Instruction Manual

: October 30, 2023
: WRC

WRC F22.1 Electric Formula RC Car

WRC-F22.1-Electric-Formula-RC-Car-FIG-1

Product Information

The F22 is a high-quality 1/10 scale formula car designed for users over 16 years old with experience in the RC model car field. It is supplied in a box equipped with an Instruction Manual. The car comes with a carbon chassis, adjustable front toe, camber and caster, adjustable rear height, full ball bearing, and an adjustable differential. The car’s technical specifications include a length of 418mm, width of 190mm, and an adjustable wheelbase of 269-265mm. The kit comes with a LIPO battery and a speed controller.

Safety Precautions

Before starting to build and operate the car, users must read and fully understand the Instruction Manual. Keep the manual in a safe place for future reference. Only use original WRC spare parts.

Additional Items Needed for Completion

The F22 kit requires additional items that are not included in the kit, such as an electric motor pinion gear, low profile steering servo, transmitter batteries for the transmitter, receiver wheel, tyres, and inserts.

Tools Required

The kit does not include the necessary tools for proper assembly. Users must obtain the following tools: Allen keys (1.5mm, 2mm, 3mm), socket (5mm, 7mm), side cutters, combination pliers, scissors, and a tool for turnbuckles/nuts. Additionally, users will need grease and oils (bearing oil and silicone oil).

Product Usage Instructions

Read the Instruction Manual carefully before starting to build and operate the car.
Obtain the necessary additional items required for completion that are not included in the kit.
Obtain the necessary tools required for proper assembly.
Follow the step-by-step instructions in the Instruction Manual to assemble the car.
Use only original WRC spare parts.
Once the car is assembled, insert the LIPO battery and connect the speed controller.
Install the electric motor pinion gear and low profile steering servo.
Insert transmitter batteries into the transmitter.
Insert the receiver wheel, tyres, and inserts.
Adjust the front toe, camber, caster, and rear height as needed.
Adjust the differential as needed.
The car is now ready to be operated. Enjoy!

INTRODUCTION

F22 is a new generation high quality 1/10 scale formula car.
F22 is supplied in a box equipped with Instruction Manual.
Its use is intended for more than 16 years old persons with experience on rc model car field. Children and all the persons without this requirement MUST have direct supervision of a knowledgeable adult responsible.

SAFETY PRECAUTIONS

Instruction Manual MUST be read and fully understood before to start building and operating functions.
Always keep Instruction Manual in safety place, ready to be consulted for any reference you need. Use only original WRC spare parts.

GENERAL INFORMATION

Assemble the kit only away from the reach of children.
Follow the building and operating instructions using the utmost care.
Don’t put any part of your body inside rotating and moving elements as this may cause damage or serious injury.
Check and clean the model before putting it away.
Don’t use your model car in public places or in roads and areas where it could generate conflict with person or vehicular traffic.
The model car is controlled by radio: you MUST put great care to avoid loss of radio control always keeping a safety margin all around your model in order to prevent any collision.
Operating frequency: check and be sure it is clear and not shared with anybody at same time; it could cause loss of control of the RC model.
Always turn on your transmitter before you turn on the receiver in the car and always turn off the receiver before you turn off your transmitter.
Keep the wheels of the model off the ground when checking the operation of the radio equipment. Disconnect the battery pack before storing your model.

WARRANTY

WRC guarantees this model kit to be free from defects in both material and workmanship within 30 days of purchase.
The total monetary value under warranty will in no case exceed the cost of the original kit purchased.
This warranty doesn’t cover any components damaged by use or modification or as result of wear. Part or parts missing from this kit must be reported within 30 days of purchase.
No part or parts will be sent under warranty without proof of purchase.
If you find a defective or missing part, contact the local distributor.
Customer service and support will be provided through local hobby store.
No warranties are expressed or implied that cover damage caused by what is considered normal use or cover or imply how long any model cars’ components or electric components will last before requiring replacement.
Due to the high performance level of this model car you will need to periodically maintain and replace consumable components; any and all warranty coverage will not cover replacement of any part or component damaged by neglect, abuse or improper or unreasonable use.
This includes but is not limited to damage from crashing, excessive moistur, improper use or no maintenance or user modifications which compromise the integrity of components.
Warranty will not cover compnents that are considered consumable on RC model car.
WRC doesn’t pay nor refund on any component sent from WRC or its distributor for warranty.
WRC reserves the right to make final determination of the warranty status of any component or part Use only original WRC spare part:

CUSTOMER SUPPORT

Please don’t hesitate to contact WRC support at info@wrc-racing.com for any problem or question. Also kindly visit our website www.wrc-racing.com to find last updates, set-up information, option parts and other information.

W.R.C. world racing car s.r.l.
Via A.Volta 2BIS
36040 Brendola (VI)
ITALY
Phone: 0039 0 444 1792263
E-mail: info@wrc-racing.com
Website: www.wrc-racing.com

TECHNICAL INFORMATION

TRANSMISSION: 2 DRIVE WHEELS
BODY: LEXAN FORMULA MODEL (NOT INCLUDED)
ADJUSTABLE FRONT TOE, CAMBER AND CASTER
ADJUSTABLE REAR HEIGHT
BUMPER /FRONT BACKSTOP
CARBON CHASSIS 2mm
FULL BALL BEARING
ADJUSTABLE DIFFERENTIAL

TECHNICAL DATA

LENGHT: 418 MM.
WIDTH: 190 MM.
ADJUSTABLE WHEEL BASE: 269-265MM.
WEIGHT CHASSIS: 1080 GR.

PART LIST

ADDITIONAL ITEMS NEEDED FOR COMPLETION (REQUIRED BUT NOT INCLUDED IN THE KIT)

WRC-F22.1-Electric-Formula-RC-Car-FIG-2

TOOLS REQUIRED

THESE TOOLS ARE NOT INCLUDED IN THE KIT BUT ARE REQUIRED FOR PROPER ASSEMBLY

WRC-F22.1-Electric-Formula-RC-Car-FIG-3

NOTICE:

THE FOLLOWING ITEMS ARE NEEDED FOR COMPLETION OF THE LM16; THEY ARE NOT INCLUDED IN THIS KIT (UNLESS NOTED) AND SHOULD BE OBTEINED FROM YOUR LOCAL HOBBY SHOP.
BE SURE TO READ THE INSTRUCTION COMPLETELY PRIOR TO ASSEMBLY

ASSEMBLY INSTRUCTION

WRC-F22.1-Electric-Formula-RC-Car-FIG-4

WRC-F22.1-Electric-Formula-RC-Car-FIG-6

WRC-F22.1-Electric-Formula-RC-Car-FIG-10

SHOCK FILLING

Fully extend the piston rod so the piston is at the bottom of the shock body.
Hold the shock upright and fill the shock body with shock oil as in the picture.
Let the oil settle and allow air bubbles to rise to the top.
Slowly move the piston up and down until no more air bubbles appear.
Add shock oil as necessary.
Pull the piston rod most of the way out of the shock bod.
Let the shock rest for 5 minutes to allow the air bubbles to scape.

WRC-F22.1-Electric-Formula-RC-Car-FIG-16