better bathrooms BeBa_28245 Zanda Bath Spout Wall Mounted Mixer Tap User Manual
- October 30, 2023
- Better Bathrooms
Table of Contents
better bathrooms BeBa_28245 Zanda Bath Spout Wall Mounted Mixer Tap User
Manual
Congratulations on your purchase
And welcome to our growing gang of savvy shoppers We’re on a mission to bring you extraordinary bathroom products, for less. From modern to traditional style ceramics, plus the gorgeous fixtures, fittings and furniture to match. So, you can fall in love with your space every single day. As one of the UK’s largest independent bathroom stores, we’ve received countless awards; including the National Business Awards UK, the Digital Entrepreneur Awards and being placed on The Sunday Times Fast Track 100. We hope your new product goes above and beyond your expectations. However, should any problems occur, please:
- log in to your account and contact our customer services team via your self-serve portal – betterbathrooms.com/CustomerAccount/Login
- contact us via betterbathrooms.com/content/contact-us
Important information
- Please read these instructions thoroughly and retain for future reference
- To avoid scratches and damage to kit surfaces, wear protective gloves when assembling/ installing the system.
- Prior to installation, check the product for transport damage. Damage, even though it will not be visible,can significantly affect system performance after the installation.
- System must be flushed prior to installation.
- Technical Specifications:
Operating Pressure:
Min: 100kPa/1.0bar
Max: 500kPa/5.0bar
Optimum: 100kPa/1.0bar – 500kPa/5bar
Recommended installation of pressure limiting valve if supply exceeds 500kPa
Operating Temperature:
Hot: Max 80°C
Cold: Min 5°C
Hot and Cold Pressures must be balanced
Inlet Connections: All G½”
NOTE:
- After installation all connections must be checked for leaks.
- All installations must be carried out in compliance with relevant water regulations.
Parts / Diagrams
| NO | Part NO. | Part Name | QTY |
|---|---|---|---|
| 1 | PTST0087-XX | M5 Screw | 3 |
| 2 | PTST0144-XX | M4 Screw | 2 |
| 3 | PTCT0515-XQ | Back plate | 1 |
| 4 | PTST0159-XX | Screw | 2 |
| 5 | PTGP0001-XX | Spout | 1 |
| 6 | PTCZ0015-P1 | Main body | 1 |
| 7 | PTWR0052-XX | Washer | 1 |
| 8 | PTDB0268-P1 | Fixed base | 1 |
| 9 | PTST0135-XX | Screw | 7 |
| 10 | PTMT0306-XX | tube | 2 |
| 11 | PTCT0516-P1 | plate | 1 |
| 12 | PTMB0568-P1 | Connector | 1 |
| 13 | PTRR0044-XX | O-ring | 2 |
| 14 | PTST0161-XX | Screw | 2 |
| 15 | PTPP0018-XX | Wall plug | 2 |
Tools required
-
Electric Drill
-
Pen
-
Screwdriver
Installation
-
Drill the hole 8mm in the wall as image shown. wrap ptfe thread seal tape around the g 1/2 outlet connector. Screw the g 1/2 outlet connector into the outlet hole by 8mm allen key the connector should be fitted to a suitable water connection not wupplied.
-
Hit the wall plug into the wall and lock the plate and fixed tube by screw to the wall.
-
Install the main body to the wall.
-
Lock 4 pieces m5x6 scres by 2.5 mm allen key to the main body, and then lock the m5x4 screw in the middle.
-
Check the product is level
-
Check for leaks
Maintenance and Cleaning
To clean all surface, use only a soft cloth(microfiber) and mild detergents (like soap) and then rinse thoroughly with clean water and dry with a soft cloth. Remove lime deposits using a mild dishwasher liquid.No abrasive chemicals or materials can be used on the product.
Regularly (at least once a quarter) clean, rinse and check the system, and if your water type differs from the standard parameters(such as pressure and hardness), adjust the frequency to the prevailing conditions, bearing in mind that the use of system under nonstandard conditions decreases its useful life and the lack of maintenance and care drastically reduces it.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>