DESwan BSC020-T Aluminum Outdoor Side Table Instruction Manual
- October 30, 2023
- DESwan
Table of Contents
DESwan BSC020-T Aluminum Outdoor Side Table
Product Information
- Product: Table
- Parts: Table Top, Leg (4), Connecting Part, M8 Headless Screw (9), Flat Washer M8 (9), Spring Washer M8 (9), Nut M8 (9), Adjustable Foot Pad (5), Plastic Cap M8 (9), Wrench, and Screwdriver
- Caution: Read instructions carefully before assembling. Count and organize all parts before beginning. Assemble on a clean soft surface to prevent scratching of the surface of the part paint. One spare screw is provided for each screw.
Product Usage Instructions
- Before beginning assembly, read the instructions carefully and count and organize all parts.
- Assemble the product on a clean soft surface, such as a piece of carpet, to prevent scratching of the part’s surface paint.
- Attach the legs to the tabletop using headless screws, flat washers, spring washers, and nuts. Do not tighten completely at this stage.
- Attach the connecting part to the table legs using headless screws, flat washers, spring washers, and nuts.
- Tighten all the screws and nuts after proper adjustment. Put plastic caps on all nuts.
- Turn over the table and adjust the feet pads under the legs if the table is unbalanced.
- Do not over-tighten as aluminum is a soft metal and over-tightening may strip thread or break parts.
CAUTION:
- Please read this instruction carefully before assembling. Count and organize all parts before you begin.
- Assemble the product on a clean soft surface, such as a piece of carpet, so as to prevent the surface paint of parts from scratching off.
- One more spare for each screw.
PARTS & HARDWARE LIST
NO. | DESCRIPTION | QTY |
---|---|---|
A | Table Top | 1 |
B | Leg | 4 |
C | Connecting Part | 1 |
D | M8 Headless Screw | 9 |
E | Flat Washer M8 | 9 |
F | Spring Washer M8 | 9 |
G | Nut M8 | 9 |
H | Adjustable Foot Pad | 5 |
I | Plastic Cap M8 | 9 |
J | Wrench | 1 |
K | Screwdriver | 1 |
Assembly
- Upend the table top on a smooth surface.
- Attach the legs to the tabletop using headless screws, flat washers, spring washers, and nuts. Do not tighten completely at this stage.
- Attach the connecting part to the table legs using headless screws, flat washers, spring washers, and nuts.
- Tighten all the screws and nuts after proper adjustment. Put plastic caps on all nuts.
- Turn over the table, and adjust the feet pads under the legs if the table is unbalanced.
PLEASE DO NOT OVER TIGHTEN
(Aluminum is a soft metal, over-tightening may strip thread or break parts).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>