Santa s Bags SB-10152 Three Tray Ornament Storage Bag with Side Pockets Instructions
- October 30, 2023
- Santa s Bags
Table of Contents
Santa s Bags SB-10152 Three Tray Ornament Storage Bag with Side Pockets
THREE-TRAY ORNAMENT STORAGE BAG
- MODEL #: SB-10152
- VER. 03102
The Three Tray Ornament Storage Bag is a storage solution for your Christmas ornaments. It comes with three trays and a main outer bag. The trays are designed to hold your ornaments securely and protect them from damage during storage. The main outer bag provides additional protection and makes it easy to transport your ornaments.
ASSEMBLY INSTRUCTIONS
Before assembly, please lay out all parts and read the instructions carefully. If you need assistance with assembly, replacement parts, or warranty activation, please visit www.SantasBags.com or email support@villagelighting.com.
Parts
- A: Tray Inserts (x6)
- B: Base (x3)
- C: Short Divider (x12)
- D: Long Divider (x6)
- E: Large Base Board (x1)
- F: Bag Insert (x1)
Assembly Steps
- Insert the three bases (Part B) into each of the three trays (Part A).
- Set up the first Part C and D in the tray as shown.
- Slide another Part C under Part D, then tilt it up into position. You will have to slightly lift the long divider (D) to position the short dividers (C) completely into place. Repeat this process for the remaining short dividers.
- Insert the remaining Long Dividers. Repeat this for all remaining dividers for each tray.
- Unfold the main outer bag.
- Insert the large baseboard (Part E) into the bottom of the main outer bag.
- Slide the long compartment separators (Part D) into each side of the main outer bag.
- Place the three trays into the main outer bag.
Once assembled, you can use the Three Tray Ornament Storage Bag to store your Christmas ornaments. Place each ornament in its own compartment and stack the trays on top of each other. Then, place the trays into the main outer bag and zip it closed. Store the bag in a cool, dry place until next Christmas.
PLEASE LAY OUT ALL PARTS AND READ INSTRUCTIONS PRIOR TO ASSEMBLY
INSTALLATION INSTRUCTIONS
- Insert the three bases (Part B) into each of the three two trays (Part A).
- Set up the first Part C and D in the tray as shown.
- Slide another Part C under Part D, then tilt it up into position. You will have to slightly lift the long divider (D) to position the short dividers (C) completely into place. Repeat this process for the remaining short dividers.
- Insert the remaining Long Dividers. Repeat this for all remaining dividers for each tray.
- Unfold the main outer bag.
- Insert the large baseboard (Part E) into the bottom of the main outer bag.
- Slide the long compartment separators (Part D) into each side of the main outer bag.
- Place the three trays into the main outer bag.
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
For assistance with assembly, replacement parts or to activate your warranty:
www.SantasBags.com. |
Support@VillageLighting.com. 2022 All
Rights Reserved ® Property of Village Lighting Co. | Intended for indoor use.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>