Godox LED500L/LED500LR LED Video Light Instruction Manual
- June 6, 2024
- Godox
Table of Contents
**Godox LED500L/LED500LR LED Video Light Instruction Manual
**
Foreword
Thank you for purchasing this Godox product!
LED500L/LED500LR video light provides a wide spectrum, beautifully soft and
even illumination for video and still photography. Three models are available:
White Version (5600K), Yellow Version (3300K), and Changeable Version
(3300K~5600K). Choose LED500L (with reflectors) or LED500LR (without
reflectors) to gain different light effects.
Features:
- 504-LED-bulbs panel is lithium-ion or DC powered
- Three versions to offer more choices
- Wireless 433MHz grouping system (6 groups & 16 channels)
- Large-sized LCD panel. Settings auto saved.
| Type | Model |
|---|---|
| White Version(Color Temperature 5600K) | LED500LW/LED500LRW |
| Yellow Version(Color Temperature 3300K) | LED500LY/LED500LRY |
| Changeable Version(Color Temperature 3300K~5600K) | LED500LC/LED500LRC |
For your safety
- Do not place in high temperature or high humidity conditions.
- If this product overheats, it will cease operation and resume working after cooling down. This is due to the built-in over temperature protection.
- Do not handle with wet hands, immerse in water, or expose to rain.
- Observe precautions when handling batteries:
- Do not mix new and used batteries or batteries of different types.
- Do not put batteries into a fire or apply direct heat to it.
- Batteries are prone to leakage when fully discharged. To avoid damage to the product, be sure to remove batteries out when the product will not be used for a long time or when batteries run out of charge.
- Should liquid from batteries come into contact with skin or clothing, rinse immediately with fresh water.
Parts
LCD Panel
Power Supply
LED500L/LED500LR supply modes are available:
- Using lithium battery: Put two SONY BP-L model lithium batteries (purchased separately) into the battery compartment separately.
- Using DC power jack: This light can be powered by DC power supply. Use a 13~16.8V adapter (included) to connect the light with the DC power jack.
Note: When using lithium battery, the Battery Level Indicator is displayed on the LCD panel. When the indicator blinks, the lithium battery power is low. Please recharge it immediately before usage in order to avoid forceful auto off.
Installing Lithium Battery
- Turn the Power Switch off.
- Target the socket of the lithium battery towards the “+” “-” contacts of the Battery Compartment. Push the battery in until it locks.
- Power the light on.
- After using the light, please power it off.
Operation
Before Usage
-
Insert the lithium battery or connect the light with the DC power supply.
-
Switch the power on, the Power Indicator
is on and the video light giving out light. -
Press the STOP/RUN Button to control the video light on and off.
-
LCD panel shows the information.
Light Brightness/Color Temperature Adjustment Adjusting Light Brightness
- Turn the select dial to adjust the light brightness.
The light brightness adjustable range changes at different color temperature with different models. Model| Color Temperature| Light Brightness Range
---|---|---
Yellow Version| 3300K| 10%~100%
White Version| 5600K
Changeable Version| 3300K/5600K| 10%~100%
3400K~5500K| 25%~100%
Adjusting Color Temperature
- Press the SET button once and the color temperature icon blinks. Turn the select dial to adjust color temperature.
Color temperature range: White Version| Yellow Version| Changeable Version
---|---|---
5600K| 3300K| 3300K~5600K
NOTE: Color temperature of White Version or Yellow Version is invariable. The LCD panel only shows 5600K or 3300K.
Wireless Remote Control
With 433 MHz wireless system, this product has remote grouping and control
function. Up to 6 groups of LED light can be controlled. 16 channels are
available with strong anti-interference capability
Please set the channels and groups of LED video light to the same as those of
remote control before usage.
Adjusting Channel/Group of the LED Video Light
- Press the CH/GRP button and the group icon blinks. Turn the select dial to choose a group ID (A to F).
- Press the CH/GRP button twice and the channel icon blinks. Turn the select dial to choose a channel ID (1 to 16).
Adjusting Channel/Group of the Remote Control
-
Press the CH/GRP button and the group icon blinks. Press the “+” “-” button to choose
a group ID (A to F). -
Press the CH/GRP button twice and the channel icon blinks. Press the “+” “-” button to choose a channel ID (1 to 16).
Adjusting Light Brightness/Color Temperature with the Remote Control
- Press the“+””-“button to adjust the light brightness.
- Press the SET button of the remote control once and the color temperature icon blinks. Press the “+” “-” button to adjust the color temperature
Note: The wireless signal can be received only when the LED light is power on.
Other Operation Tips:
- Pressing the ON/OFF button on the remote control can turn on/off all the LED groups.
- Pressing the “SET” button on the remote control for 2 seconds can turn on/off the current LED group.
- The remote control will auto power off after four hours of idle operation.
Tips of Using Remote Control:
- When using the White Version, please set the color temperature of the remote control as 5600K constantly;
- When using the Yellow Version, please set the color temperature of the remote control as 3300K constantly;
- Please remove the battery if the light will not be used for an extended period of time.
Note: Remote control is available separately
Replacing A Color Filter
- Pinch the edge of the color filter and pull it out upwardly.
- Insert a new color filter in and push it downwardly. Then the color filter is securely in position.
What’s in the Box of LED500L/LED500LR?
NO.| Included Item| White Version| Yellow Version|
Changeable Version
---|---|---|---|---
1| LED Video Light| 1 PCS| 1 PCS| 1 PCS
2| Power Adapter| 1 PCS| 1 PCS| 1 PCS
3| Diffusion Filter| 1 PCS| 1 PCS| 1 PCS
4| Yellow Filter| 1 PCS| NO| NO
5| Handle| 1 PCS| 1 PCS| 1 PCS
-
LED Video Light
-
Handle
-
Power Adapter
Technical Data
LED500 Video Light| White Version| Yellow Version|
Changeable Version
---|---|---|---
Lithium Battery| SONY: NP-F970*2(lithium battery)
(sold separately)
DC Power Supply| 13~16.8V
Channel| 16
Group| 6 groups(A,B,C,D,E,F)
Power| Max. 32W
Color Temperature| 5600K±300K| 3300K±300K| 3300K~5600K ±300K
Brightness(LUX)| 2900 (1m)| 2900 (1m)| 2900 (1m/4200K)
1450 (1m/3300K)
1450 (1m/5600K)
Light Brightness
Range
| 10%~100%| 10%~100%| 3300K/5600K :10%~100%
3400K~5500K :25%~100%
LED Beads Quantity| 504| 504| 5600K：252
3300K：252
Operation Temperature| -10~50 °C
Dimension| 250mm170mm45mm
Net Weight| 510g (LED500L) / 620g (LED500LR)
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warranty
Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe keep it. Thank you!
| Product Information | Model | Product Code Number |
|---|---|---|
| Customer Information | Name | Contact Number |
Address
Seller Information| Name
Contact Number
Address
Date of Sale
Note:
Applicable Products
The document applies to the products listed on the Product Maintenance lnformation (see below for further information). Other products or accessories (e.g. promotional items, giveaways and additional accessories attached,etc.) are notincluded in this warranty scope
Warranty Period
The warranty period of products and accessories is implemented according to
the relevant Product Maintenance lnformation. The warranty period is
calculated from the day(purchase date) when the product is bought for the
first time, And the purchase date is considered as the date registered on the
warranty card when buying the product.
How to Get the Maintenance Service
If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.
Inapplicable Cases
The guarantee and service offered by this document are not applicable in the following cases:
- The product or accessory has expired its warranty period.
- Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc.
- Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment
- The original identifying information of product or accessory is modified, alternated, or removed.
- No valid warranty card.
- Breakage or damage caused by using illegally authorized, nonstandard or non-public released software.
- Breakage or damage caused by force majeure or accident.
- Breakage or damage that could not be attributed to the product itself.
Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope.
Maintenance and Service Support Information
The warranty period and service types of products are implemented according to
the following Product Maintenance Information:
| Product Type | Name | Maintenance Period(month) | Warranty Service Type |
|---|---|---|---|
| Parts | Circuit Board | 12 | Customer sends the |
product to designated site
Battery| 3| Customer sends the
product to designated site
Electrical parts e.g.battery charger, power cord, sync cable, etc.| 12|
Customer sends the product to designated site
Other Items| Flash tube, modeling lamp, lamp body, lamp cover, lockingdevice,
package, etc.| No| Without warranty
Customer Support
Godox
After-sale Service Call: 0755-29609320-8062