suspenz 12-9903 EZ Rack Arm with Strap User Guide
- October 30, 2023
- suspenz
Table of Contents
Model # 12-9903
Model # 12-0101
EZ Rack
Copied by Many-Matched by None™
Parts List
Qty| Name
2| EZ Rack Arm with Strap
4| Phillips Head Screw
Holds up to 125 LBS
Scan to see Video Instructions for Assembly & Use or Visit Suspenz.com “Video & Manual” page QR code reader app required
STEP 1
There are 3 ways to mount the rack:
A. Wall
B. Free-Standing Frame Direct
C. Free-Standing Frame with Brackets
Mounting to Wall Tools Needed :
Tape Measure, Electric Drill, 3N’ Drill Bit, #3 Phillips Head driver, and a cold beverage of your choice The length of your boat will determine arm spacing. Ideal arm spacing is 40% of total boat length, (boat length X 0.4 = spacing).
-
Locate studs where arms will be mounted and mark desired height for the arms. Push a mounting screw into wall to mark the locations for holes. Wall studs are typically on 16″ centers. Screwing only into drywall is not sufficient and could result in injury to self and kayak
-
Pre-drill pilot hole for Phillips Head screw using a 3/i’ drill bit.
Pro Tip: An old woodworkers trick is to rub the screw threads on a bar of soap for easy installation. -
Use #3 Phillips Head driver to insert screws. Initially, leave top screw loose (helps when locating hole for lower screw). After inserting bottom screw, tighten both screws. 4. Mount second arm at same height as first arm.
-
Go to STEP 2
If you have not yet opened your cold beverage, this would be an appropriate time to do so.
Free-Standing Frame:
Direct Tools Needed : Two 1/2″ Wrenches or one V2″ Wrench and one #5 Allen
Wrench
Using mounting hardware supplied in frame box, insert bolts through holes in
arms then into the frame and tighten securely.
Free-Standing Frame: with Brackets
Tool Needed : 1/2″ Wrench Attach Free-Standing bracket using instructions
provided with the bracket. Attach arms to the frame using the locking pin. The
locking pin can be inserted in either top or bottom hole of bracket for more
exact positioning.
Note: Brackets sold separately: Model #31-5501 (Yellow) or Model #
31-5502 (Black). Brackets are required for attaching arms to back side of
frame.
Go to STEP 2
Go to STEP 2
STEP 2: Strap Adjustments
- Once both arms are mounted, place boat onto padded arms.
- Place Velcro adjustable safety strap over boat. Buckle ends together then adjust safety straps to achieve a snug fit.
For Technical assistance or Replacement parts: call 866.787.7369
OUR PLEDGE TO YOU
Suspenz® products are warrantied for life against defects in material or workmanship to the original owner. Product must be used for its intended purpose under normal conditions. Please visit www.Suspenz.com for complete warranty information.
Suspenz®, Inc.
8725 Roswell Road #0-220
Atlanta GA 30350
Customer Service:770-518-0045
Fax: 770-518-8507
Website: www.suspenz.com
References
- Suspenz Kayak Canoe and SUP - Storage and Transport
- Suspenz Kayak Canoe and SUP - Storage and Transport
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>