MindLax M2 Sleeping Mat User Manual

MindLax M2 Sleeping Mat

Product Information

The device complies with part 15 of the FCC Rules and has been tested to meet the limits for a Class B digital device. It is designed to provide reasonable protection against harmful interference in a residential installation. The device generates,  uses, and can radiate radio frequency energy.

FCC Compliance Statement

Operation of the device is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure condition without restriction.

Product Usage Instructions

To ensure compliance with FCC regulations and prevent harmful interference to radio communications, please follow these usage instructions:

1. Use the device in accordance with the provided instructions.
2. Do not make any changes or modifications to the device without express approval from the part responsible for compliance.
3. Do not use the device in a manner that may cause harmful interference to radio communications.
4. Use the device in portable exposure conditions without restriction.

About Our Application

Our product application will irregularly schedule upgrade sottware, to compatible more mobile phone models and system eonions.

Product Parameters

Work environment:0°C-45°C, relative humidity: 15%-90% Storage environment:-20°C-60°C, relative humidity: 59- 95%

• Power: 20W
• Input voltage/current: 12V/1.67A (MAX)
• Battery operatingvoltage: 7.4v
• Battery capacity: 3000mAh
• Service duration: about 12 hours under after fully charged
• Size: about (L) 104° (W) 64.5* (H) 40mm
• Weight: about 1.58kg

Product Material

• Fabric: 48% nylon, 36% polyester fiber, 16% spandex
• Filler: 100% polyester fiber

Flame Rating

• Mat: BS-5852-2
• Control box: UL94 V_0

Name and content of harmful substances in the product

• “o” means that the content of the hazardous substance in all homogeneous materials of the component below the limit specified in SJ / T11363-2006 standard.
• “×” means that the content of the hazardous substance in a homogeneous material of the component exceeding the limit specified in SJ / T11363-2006.
• The reason why this product is marked with “*” is that there are no alternative technologies or components available at this stage.

Product Warranty

Essential Information

• If the product have any problem, please contact
• MindLax customer service: support@mindlax.net.

Limited Warranty
This limited warranty excludes all costs and damage resulting from: Non- hardware technical problems; Natural depletion, wear and tear, aging of consumable marerrals.

• Failure or damage caused by incorrect installation, operation or use in a working environment other than that specified by the product (e.g. temperature is too high, too low, too wet or dry, altitude is too high, voltage or current is unstable, etc.);
• Damage caused by accident, misuse, improper storage (rat damage, liquid infiltration, etc.);
• Damage to the normal operation of the product due to the use of self-made or non-public software;
• Failure or damage caused by unauthorized dismantling for repair or unauthorized modification or abuse.

Product and after-sales service commitment schedule

Preface
Dear customer,
Thank you for selecting MindLax. In order to further understand our project, please read the manual carefully,we wish you to have a pleasant experience!

Packing List

Product Display

Function Key <on-off key/ rouse key>

• Power on: Long press the button for 3 second to start up.
• Shut down: Long press the button for 3 second to shut down.
• Rouse: Click the button, indicator lamp will extinguish after light up for 3 second.

Status Indicator

• Power on: Green, light twinkle for three times.
• Shut down: Green, Light twinkle for three times then off.
• Rouse: Green, light twinkle for three times.
• Bluetooth connection succeeded: Green, light twinkle for three times.
• Battery low: When battery is lower than 30%, red light will twinkle.
• Charging: Green light twinkle, under power on state.
• Full charge: Green light continuously light on, light will extinguish after pull out the charging line.

iPhone ios Instructions

1. Install “MindLax®”application
   • If you are using it for the first time, please scan the OR code and install “MindLax®” application, or search “MindLax “and install it in app store.
2. Connect your equipment
   • Before connecting, you must start MindLax Sleeping Mat (M2).
3. Start to use
   • Find application “Mindlax°” , click to open, according to the guiding in the application, to start using it.

Android Phone Instructions

1. Install “MindLax®”application
   • If you are using it for the first time, please scan the OR code and install “MindLax™” application, or search “MindLax®” and install it in Google Play.
2. Connect your equipment
   • Before connecting, you must start Mind Lax” Sleeping Mat (M2).
3. Start to use
   • Find application “Mindlax*”, click to open, according to the guiding in the application, to start using it.

contact information

After-sale email address:support@mindlax.com
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. FCC Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

• www.mindlax.net.
• After-sale email address: support@mindlax.net.
• Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>