perixx PERIDUO-610 Wireless Keyboard and Mouse Combo Set User Manual

perixx PERIDUO-610 Wireless Keyboard and Mouse Combo Set User Manual

Product Illustration

One receiver for both keyboard and mouse

FCC Warning

This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

NOTE 2:

Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Caution

• The manufacturer and re-resellers are not responsible for any technical malfunctions, damage, or personal injury incurred by:
• Any attempt to dismantle, change or modify the product in any manner
• Malfunction or damage due to misuse or improper alteration or repair.
• Malfunction or damage caused by external influence such as falling
• Malfunction or damage is caused by a fire, salt, gas, earthquake, lightning, wind, water, or other natural calamities, or abnormal voltage.
• Malfunction or damage is caused by other devices connected to the products.
• Malfunction or damage is caused by high temperature, humid, greasy, dusty and hazardous environment.
• You are cautioned that changes or modifications not expressly approved by Perixx Computer GmbH could void your authority to operate the equipment.
• All brand names, trademarks and logos are the properties of their respective owners.

Please Note: Long-term repetitive use of any keyboard and mouse could cause injury to user. Perixx recommends users to avoid excessive use of this or any keyboard and mouse.

Important Safety Instructions

• Avoid Dropping.
• Do not disassemble.
• Do no expose to liquids.
• This product is suitable for moderate climates only.
• The maximum ambient temperature during use of this product must not exceed 40 degree.
• Open flame sources, such as candles, must not be placed on this product.
• Only use a dry cloth or brush to clean this product.

Specification

Specification|
---|---
Keyboard|  | Mouse|
Interface| 2.4G| Interface| 2.4G
Size| 43212119mm| Size| 1096131mm
Input Current| 3V / ≤ 10mA| Input Current| 1.5V / ≤ 20mA
Weight| 380g| Weight| 57g
Material| ABS| Material| ABS
OS requirement| Win 7 / above| OS requirement| Win 7 / above
Key number| 107| Key number| 4
Key Type| Membrane| DPI| 800 / 1200 / 1600
Actuation distance| 2.35±0.4mm| Acceleration| 16G
Total travel distance| 3.9±0.1mm| Tracking Speed| 30 IPS
Durability| 3 million keypresses| Report Rate| 125Hz
 |  | Durability| 1 million keypresses

1st LED Indicator: Num Lock Status: ON (Blue light will stay on)
2nd LED Indicator: Caps Lock Status: ON (Blue light will stay on)
1 2 3 3th LED Indicator: Low Voltage Status: Blinking red light.

Rebinding process

Keyboard:

Install the batiery > Turn on the power > press ESC+Q > the indicator LED flash > Release those keys > plug
the Receiver > Connect success > the LEDs will stop flash.

Mouse:

Install the battery > Turn on the power > Press the Scroll wheel & Right Bution > plug the Receiver >
Release the buttons > Connect success.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>