Byron 1200 Wired Underdome Doorbell Instructions
- June 4, 2024
- Byron
Table of Contents
Byron 1200 Wired Underdome Doorbell
Instructions
The Underdome bell is powered by an 8 volt 1 amp transformer (not supplied)
Wire the bell to terminals 1 & 2 as shown in diagram.
Replace the dome cover and gently tighten the screw, adjust dome clock-wise or
anti-clockwise for best tone.
IMPORTANT – DO NOT WIRE DIRECTLY TO THE MAINS. IF IN DOUBT
PLEASE CONSULT A QUALIFIED ELECTRICIAN
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>