HAMPTON BAY KSF1303AX-01-DB Richland 3-Light Interior Vanity User Guide

USE AND CARE GUIDE
RICHLAND 3-LIGHT INTERIOR VANITY
User Guide

KSF1303AX-01-DB Richland 3-Light Interior Vanity

THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this pendant. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Hampton Bay!

Safety Information

WARNING: Carefully read and understand the information in this manual before beginning assembly and installation. Failure to do so could lead to electric shock, fire or other injuries which could be hazardous or even fatal.
WARNING: Be sure the electricity to the wires you are working on is shut off. Either remove the fuse or turn the circuit off.
NOTICE: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Warranty

WHAT IS COVERED
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of three (3) years from date of purchase. This warranty applies only to the original consumer and only to products used in normal use and service. If this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect or mishandling.
WHAT IS NOT COVERED
This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, or faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear.
The manufacturer does not warrant and specially disclaims any warranty, whether express or implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor / expense costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HamptonBay.com.

Pre-Installation

PLANNING INSTALLATION
Read all instructions before assembly. Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse from the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.

NOTE: Keep your receipt and these instructions for proof of purchase.

TOOLS REQUIRED

HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.

PACKAGE CONTENTS

Installation (continued)

1. Attaching the cross bar to the outlet box
   □ Screw the mounting screws (CC) into the hole onthe outside of the cross bar (EE) so that the threads face out.
   □ Mount the cross bar (EE) to the outlet box (not included) using the outlet box screws (BB).
   □ Make sure the threads of the mounting screws (CC) are facing out when the cross bar (EE) is attached to the outlet box.

2. Making the electrical connections
   □ Wrap the middle of the ground wire from the fixture around the ground screw (DD) on the cross bar (EE). Use a wire connector (AA) to connect the end of the ground wire from the fixture to the ground wire from the outlet box.
   □ Use a wire connector (AA) to connect the white wire from the fixture to the white wire (neutral wire) from the outlet box.
   □ Use a wire connector (AA) to connect the black wire from the fixture to the black wire (live wire) from the outlet box.
   □ Wrap the three wire connections with electrical tape for a more secure connection.
   □ Position the wires back inside the outlet box.

3. Securing the fixture to the wall
   □ Make sure the electrical wires are inside the outlet box.
   □ Align the mounting screws (CC) to protrude through the holes on the wall plate (F).
   □ Screw the lock nuts (E) onto the mounting screws (CC) to secure the fixture.

4. Attaching the shade
   □ Place the shade (C) over the socket (D).
   □ Place the socket cap (B) over the socket (D).
   □ Screw the socket ring (A) onto the socket (D).
   □ Repeat the above steps for the remaining shade(C)

5. Installing bulbs
   □ Screw three 60-Watt maximum, incandescent bulbs (sold separately) into the sockets (D)
   NOTE: You can use LED equivalent energy-saving bulbs that do not exceed 8 Watts each (not included).

Care and Cleaning

□ Clean the fixture with a soft, dry cloth.
□ Do not use any cleaners with chemicals, solvents or hash abrasives.

WARNING: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from the fuse box.

Troubleshooting

□ Contact a qualified electrician or call the Customer Service Team at 1-855 -HD-HAMPTON.

Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.

References

• Hampton Bay - The Home Depot
• Hampton Bay - The Home Depot

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>