Zbna EP08 Blood Pressure Smart Bracelet User Manual

ECG/Blood glucose/ Blood  pressure
Smart Bracelet

User Manual

Device’s structure

Disassembly and wear

1. Disassembly
   Align the metal pin on left end of the watch strap with the hole at the connection point of the bracelet, flip the metal ball on the right , and align the hole on the right to complete the installation and disassembly.

2. Wear
   Better worn the watch at 1-2CM behind the ulnar neck of the wrist. When wearing, make sure that the bottom of the watch is close to the skin to avoid light leakage of the sensor and affect the accuracy of the measurement.

Charge

This is magnetically charge, so only need to align it with the charging port and automatically attach it.
Power on ? off
Switch on: Long press the screen to power on.
Switch off: On settings and find out switch off.

Install APP and Bluetooth connection

1. Turn on the device, turn on the Bluetooth of the mobile phone, scan the QR code below or search “H Band” in the App store / Google play store to download and install.
   https://www.vphband.com/hband/hband.html

2. Register and log in Please register with an email or mobile number if you don’ t have a H Band account, or you can choose “Login without an account” to enter.

3. Open the APP, To the connection interface please tap “Scan Device”, turn on the Bluetooth, then find the corresponding device to connect. Also can go to the data panel to get connect.

Operation guide of the device function interface

Device function introduction

1. Time , date & week
   For the first time, please connect to the APP to sync the correct time, date, and week.

2. Dial switch
   Long press the screen to switch the dial style .
   Note: To customize the watch face, please go to APP Settings Mine —>EP08—>Dial Settings).

3. Shortcut set
   Swipe down on the main time interface to enter the drop-down shortcut interface. The specific functions are as follows: Do not disturb/Brightness/Find phone/About/ Settings

4. Workouts
   Press the button on the right side of the watch to find the sport. As follows: Outdoor running, outdoor walking, indoor running, indoor walking, hiking, stepper, outdoor cycling, indoor cycling, elliptical, machine, rowing machine more than 20 kinds of sports for choose.

5. Pedometer
   Steps, calorie burnt and distance will be shown on this interface.

6. Heart rate monitoring 1
   Switch to this interface, Heart rate automatic measurement, The icon starts to flash, then shows the result.

7. Blood pressure monitoring 2
   Switch to this interface, Tap the triangle button below, The icon starts to flash, then shows the result.

8. ECG test
   Switch to the interface of ECG. Click the button to the ECG test state, and put your finger against the right electrode pad. (Please make sure the device is worn on your wrist properly and the skin is moist til the result is out). The result by this manual testing on bracelet will not be saved on App. If you wan to save the data, please start the ECG testing on App. The data will be shown on a graph.
   

9. Blood glucose monitoring 3
   Switch to this interface, Tap the triangle button below, The icon starts to flash, then shows the result.

10. Blood oxygen monitoring 4
    Switch to this interface, Blood oxygen automatic measurement, The icon starts to flash, then shows the result.

11. Body temperature monitoring 5
    Switch to this interface, Tap the triangle button below, The icon starts to flash, then shows the result.

12. Sleep monitoring 6
    Switch to this interface, check the duration of deep sleep, duration of total sleep .

13. Weather 7
    When the device connected to the APP, the weather will automatically been sync.

14. Notification 8
    Synchronize incoming calls, text messages, QQ, WeChat and other application software messages, never missing any important messages anytime, anywhere.

15. Alarm 9
    Switch to this function interface ,to find clock, when the alarm not set, it is shown on the right side: APP find “My” , Tap ”EP08″ to find “Alarm Settings” , tap on the upper right corner “+” , after setting completed will show on the device .

16. Stopwatch 10
    Tap to enter the stopwatch interface, Tap the middle button to start or pause, To recalculate, press the reset button, and press the exit button to return.

17. Timer 11
    Find out timer in the function list, adjust the time to start timing.

18. Music 12
    When the device connected to the APP, The music player software has been installed on the phone just tap play to realize the synchronization of the device. Tap the middle play/pause button to control the phone to play music.

19. Find phone 13
    After Bluetooth connected, tap on the device find phone function, the phone will vibrate and ringing.

20. Female 14
    Save personal information as women, This function can be set according to personal circumstances.

21. Camera 15
    After the Bluetooth connection, enter the watch camera interface, Shake the bracelet to take a picture.

22. Settings 16
    Find out set in the function list, As follows: Brightness/Auto- lock/Switch/Date & time/H Band/Dial/ Notification/Language/About/Erase Date/Power off.

APP functions and instructions

1. Dashboard
(1)steps and time; 2 More (Heart rate / Blood pressure / setting); 3 Steps, distance and calories data interface; 4 Sleep data interface; 5 Heart rate monitoring data interface; 6 Blood pressure monitoring data interface; 7 ECG monitoring data interface; 8  Blood oxygen monitoring data interface; 9 HRV date interface; 10  Body temperature data interface; 11 women’ s menstrual cycle data interface; 12 Blood glucose data interface.

2. Movement
1. Select the GPS Movement button in the App.
2. Select the map software installed on the phone.
3. Select Start sport button.
4. Go to the open area and select Pause button if the GPS single is weak.

When GPS exercise completed, select movement of the device 5, tap start button, and select exercise mode to confirm. At the same time, device will automatically switch to the data interface in this sport mode,the APP can be used to pause exercise or on device left Slide to pause exercise, while the exercise data will be automatically saved in the APP.
3, Mine
Personal information : Tap the avatar and nickname 1 to enter, The content are as follows: nickname, gender, date of birth, weight, height, BMI, skin color.
My device: the content are as follows 2:
Message notification: receive/close the application message reminder.
Alarm settings: check or create an alarm.
Sedentary setting: Set a sedentary reminder time.
Heart rate alert: Set the upper limit of resting heart rate, and automa- tically alarm when it reaches or exceeds it.
Turn wrist detection:turn your wrist to brighten the screen. Pair device: binding the device.
Find device: find the device.
BP Private Mode: set the private mode to obtain more accurate data. for individually, normally use general mode.
Blood glucose Private Mode:Turn on the switch,To the blood sugar private mode settings, type your blood sugar figure before meals and save it. After the blood sugar private mode turned on, switch on the automatic blood sugar monitoring, wear on the watch, make the watch automatically monitor for two days, and then check the data trend in the APP.

Screen-on Time: Set screen time.
Weather setting: Set temperature unit/swithch on weather push function.
Switch Setting: HR Automatic monitoring/BP Automatic monitoring/Blood Oxygen Nighttime monitoring/Disconnect Alert/Scientific sleep/Automatic temperature monitoring
Take photo: After connecting Bluetooth and clicking app to take photos, the watch can control the mobile phone to take photos.
Dial settings: support choose to use the inherent dial 3 of the device , or choose the “photo dial”. (customize to upload pictures as you like),also can choose exquisite watch face in “More Watch Faces” .
Firmware update: current firmware information and update firmware.
Factory Reset: Clear all data on the device and shut down.
Reset:
Disconnect: Disconnect device.

Help: check answers of “Cannot connect to the device”, “Easy to disconnect the device”, and “Message cannot be pushed”.
Permission management: Obtain part of mobile phone permissions during APP use.
Steps goal: Set target steps.
Sleep: Set target sleep time.
Unit setting: Set imperial or metric units.
APP style: Set the APP background style.
About us: check current APP version information.
We Run: bind WeChat sports.
Log out : Log out of the current account.

Parameter

Note

1. Before measuring, please make sure that you have saved correct personal information on the APP, such as height, age, gender, weight, etc., and synchronize data;
2. Sit for 5-10 minutes before measurement to keep your heartbeat calm and breathing satable.
3. Please keep relaxed during measurement, panting, talking walking and exercise will affect the accuracy of the measurement results;
4. Keep a correct sitting posture, make the hands flat and keep it parallel with heart.

Wear and maintenance

The products are suitable for wear all day, so when you wear and care for the smart device, please follow the following brief instructions:

1. Keep the smart device dry:
   1.1,Clean your wrist and the smart band/smart watch you are wearing regular, especially after exercise, sweating, or skin contact with soap or detergent and other substances, the substance may get inside of the product so should be cleaned regularly .

2. Keep wearing the product correctly: 2.1, Please do not wear the device too tightly, should be able to move back and forth on the wrist.
   2.2, If use a heart rate device to record your heart rate throughout a day, the device should be flat one finger wide among the wrist bone. In order to better check the data during active exercises, wear the device among the wrist bone about
   2-3 Finger-width position.
   2.3, Prolonged friction and restraint may irritate your skin, after a long time wearing, take off the device and give skin a rest period.

3. Keep smart devices clean:
   3.1, If device is damp, such as sweating or splashing, please clean and dry it, make sure the skin layer is in a suitable dry humidity, and then wear again.
   The data collected by this device is for reference only, not for medical purpose

FCC Caution:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turming the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>