LA CROSSE 16 Inch Everly Wall Clock User Manual
- June 4, 2024
- La Crosse
Table of Contents
LA CROSSE 16 Inch Everly Wall Clock User Manual
WARRANTY & SUPPORT
This product is warranted to be free from defects in material and workmanship
under normal use and service for a period of two years from the date of sale
to the customer. Warranty will not apply to defects resulting from abuse,
accidents, or misuse. If a defect that is covered by this warranty arises
during the warranty period, promptly return the clock
(postage prepaid) with proof of purchase showing the date the clock was
purchased to the following address and such defects will be repaired, or the
products will be replaced at La Crosse Clock Company option without charge.
- La Crosse Clock Company
- Warranty Department
- 2830 South 26th Street.
- La Crosse, WI 54601
- For Online support visit: www.lacrossetechnology.com/support
WARNING: This product can expose you to chemicals including styrene, which is known in the State of California to cause cancer. For more information go to: https://[www.p65warnings.ca.gov](http://www.p65warnings.ca.gov)/Made in China – Printed in China
POWER UP
- Insert 1 fresh AA alkaline battery, according to polarity, into the Battery Compartment.
- Rotate the Time Set Wheel to set the time.
- Mount on a wall and enjoy!
Learn more from our video: bit.ly/wall clock setup
Note: The quartz movement will keep the clock running accurately. If the clock does not operate, or steadily loses time, replace the battery.
MOUNTING
Use the Hanger Hole on the back to mount the clock.
SPECIFICATIONS
Battery Requirements: 1 AA (IEC, LR6, 1.5V) required in the Battery
Compartment (Alkaline recommended)
Battery Life: 12 months
CARE & MAINTENANCE
When batteries of different brand or type are used together, or new and old batteries are used together, some batteries may be over-discharged due to a difference of voltage or capacity. This can result in venting, leakage, and rupture and may cause personal injury.
-
Always purchase the correct size and grade of battery
most suitable for the intended use. -
Always replace the whole set of batteries at one time,
taking care not to mix old and new ones, or batteries of different types. -
Clean the battery contacts and also those of the device
prior to battery installation. -
Ensure the batteries are installed correctly with regard to
polarity (+ and -). -
Remove batteries from product during periods of non-use. Battery leakage can cause corrosion and damage to this product.
-
Remove used batteries promptly.
-
For recycling and disposal of batteries, and to protect the environment, please check the internet or your local phone directory for local recycling centers and/or follow local government regulations.