WORRICOW P-00 Wireless Bluetooth Headphone User Guide

October 30, 2023
WORRICOW

WORRICOW P-00 Wireless Bluetooth Headphone User Guide

Check the Items

  1. Headset body
  2. USB charge cable
  3. User Guide
  4. Dual 3.5mm audio jack cable

Product Specification

  • Effective distance: 10m
  • Working hours of the headset: About 6.0hours
  • Charge time of the headset: About 2.5 hours
  • Charging input voltage: 3.7V—-5V DC
  • FM frequency: 87.0-108MHz
  • Bluetooth frequency: 2.402-2.480GHz

Note: Due to different pairing devices and using environment, the working hours of the headset are different.

Product Overview

  1. :Long press this key to switch on/off.
  2. M :Short press to change the mode, Bluetooth/MP3/FM radio.
  3. :Short press: Previous, Long press: volume-;
  4. :Short press: Next, Long press: volume+;
  5. :PLAY/PAUSE/ANSWER;

Having a call: short press to answer the phone, long press to refuse the phone. Continue press two times will redial the last time phone number you dialed.

FM mode: Long press to search FM frequency automatically

Charge the Headset
The internal rechargeable battery inside must be fully charged before you start to use the headset. Connect one end of the USB cable to the charger or the USB interface of the computer, and the other end to the charge interface of the headset. Red light on: charging. Red light off: charged fully. And unplug the charger in time.

Bluetooth Pairing Operation Method:
Long press to power on and enter bluetooth pairing model.  At this time search the corresponding bluetooth device name P15 on the phone, click the device name P15 on the mobilephone for the bluetooth pairing.

Dos and Don’ts

  • Keep the product dry. Do not store it in damp areas.
  • Do not exposure the product to the sun or high temperature.
  • Do not attempt to open the product, especially operated by non-professional person.
  • Do not make the product fall down, shake the product violently, or strike the product with hard objects.
  • Do not use harsh chemicals or cleaner to clean the headset.
  • Do not continuously charge the headset for over 10 hours to avoid affecting the service life.

Warning:
To prevent possible hearing damage, do not listen at high volume levels for long period.

FCC Warning

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

ISED Warning

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the foll owing two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.

NOTE: This equipment has been tested and found to c The device has been evaluated to meet general RF exposure requirement. The device can be used installed and operated with minimum distance 0mm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals