nuro HMI Touch Screen Control System User Guide
- October 30, 2023
- nuro
Table of Contents
HMI User Guide
Version 1.0
14 October 2022
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two
conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Certain of the unintentional radio frequency radiators in this vehicle that
operate under Part 15 of the FCC Rules are exempt from a specific FCC approval
requirement but are still subject to the requirement to operate without
causing harmful interference. FCC Rules provide that the operator of the
exempted device shall be required to stop operating the device upon a finding
by the Federal Communications Commission or its representative that the device
is causing harmful interference.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
This equipment should be installed and operated with minimum distance 20cm
between the radiator& your body.
This device includes a radio frequency identification device that operates
under Part 15 of the
FCC Rules and has been approved under the certification approach under
FCC ID: XMR201707BG96 Operates under FCC Rule Parts 22, 24, and 27.
Abstract
HMI is a subsystem of a project on an unmanned freight trolley customized by BYD for customers. Monitoring, intelligent voice, RFID near field communication and other main functions, assist customers in fast order processing, vehicle management and maintenance, etc.
Product Specifications
| Processor | MTK MT2712S |
|---|---|
| Storage | 64GB eMMC +4GB LPDDR4 |
| Operating System | Android 9.0 |
| Display | 12.8″ 1920* 1080 |
| Communication interface | RFID |
LTE Band4 Band13
100BASE-T1
Audio| Speaker 15W1
Microphone2
Camera| 960P*2
Sensor| Ambient Light Sensor
Operating Voltage| 10-16VDC@3 A
Working Temperature Range| -30-70°C
Storage Temperature Range| -4085°C
IP Level| IP67
Product connection
3.1 BOX connection
3.2 Display Module Connection
Delivery Instructions
The product is loaded on the delivery truck display components, its usage is
the pictures showed on the manual, users touch the screen, input pick-up code,
open the door, pick up objects, close the door, please see the chart below:
– Consumer Unloading (Groceries)
Parking
|
Consumer Greeting 
---|---
| 
| 
| 
© Nuro 2022. All rights reserved.
Nuro HMI User Guide
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>