SWISSTEN TWS SB Stonebuds User Manual
- October 30, 2023
- Swissten
Table of Contents
User Manual
Power on/off
Auto power on: Open the charging case and put out the earphones. They will automatically start up and connect to your device.
Manual power on: In the shutdown state, press and hold the touch key for more than 3 seconds to start the earbuds.
Auto power off: Put the earphones into the charging case and close the cover of the charging case. The earphones will automatically shut down.
Manual power off: If the earphones are power on, press and hold the touch key for more than 5 seconds to power off.
Bluetooth pairing
Open the charging case and take out the earphones. After that turn on Bluetooth function on your phone. Find and select SWISSTEN StoneBuds in the list of Bluetooth devices.
TIP: If you want to connect the same phone again, open the charging case and the earphones will reconnect automatically.
Operation
Music
Play/pause: When music playing, touch the headset once to pause, then again touch the headset once to play again.
Previous song: Touch the left earphone two times
Next song: Touch the right earphone two times.
Call
Answer: When a call comes in, touch the left or right earbud once to answer the call.
Hang up: During a call, touch the left or right earbud to hang up the phone once.
Reject: When you call, long touch the left or right earbud to reject the call.
Voice assistant
When connected to the phone, touch the earbuds for 2 seconds to start the voice assistant.
Earbuds charging
Put the earphone into the charging box and close the lid, the earphone will automatically enter the charging state. The light will shine on the charging box when earbuds charging. When earbuds full power the charging box blue light will be off.
Charging case
Use the Micro USB cable to charge the charging box, and the blue light will be on when charging,
Specifications:
Bluetooth Version: v5.0
True Wireless Stereo - TWS
Operation Range: 10m
Earphones Batteries: 2×45 mAh
Case Battery: 300 mAh
Working Time: 2,5hrs
Charging cable: Micro USB (included package)
Charging Time: 2 hrs
Case Size: 70 x 39 x 31 mm
BT profiles: A2DP, AVRCP V1.5, HFP V1.6, HSP V1.2
Freq. Response: 20 Hz - 20 kHz
Sensitivity: 105 dB SPL (sound pressure level) at 1 kHz
Impedance: 16 Ohm
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>