SWISSTEN StoneBuds Bluetooth Earbuds User Manual
- June 10, 2024
- Swissten
Table of Contents
SWISSTEN Stone Buds Bluetooth Earbuds User Manual
Power on/off
Auto power on: Open the charging case and put out the earphones. They
will automatically start up and connect to your device.
Manual power on: In the shutdown state, press and hold the touch key for
more than 3 seconds to start the earbuds.
Auto power off: Put the earphones into the charging case and close the
cover of the charging case. The earphones will automatically shut down.
Manual power off: If the earphones are power on, press and hold the touch
key for more than 5 seconds to power off.
Bluetooth pairing
Open the charging case and take out the earphones. After that turn on Bluetooth function on your phone. Find and select SWISSTEN Stone Buds in the list of Bluetooth devices.
TIP: If you want to connect the same phone again, open the charging case and the earphones will reconnect automatically.
Operation
Music
Play/pause: When music playing, touch the headset once to pause, then
again touch the headset once to play again.
Previous song: Touch the left earphone two times
Next song: Touch the right earphone two times.
Call
Answer: When a call comes in, touch the left or right earbud once to
answer the call.
Hang up: During a call, touch the left or right earbud to hang up the
phone once.
Reject: When you call, long touch the left or right earbud to reject the
call.
Voice assistant
When connected to the phone, touch the earbuds for 2 seconds to start the voice assistant.
Earbuds charging
Put the earphone into the charging box and close the lid, the earphone will automatically enter the charging state. The light will shine on the charging box when earbuds charging. When earbuds full power the charging box blue light will be off.
Charging case
Use the Micro USB cable to charge the charging box, and the blue light will be on when charging,
Specification
- Bluetooth Version: v5.0 True Wireless Stereo – TWS
- Operation Range: 10m
- Earphones Batteries: 2×45 mAh
- Case Battery: 300 mAh
- Working Time: 2,5hrs
- Charging cable: Micro USB (included package)
- Charging Time: 2 hrs
- Case Size: 70 x 39 x 31 mm
- BT profiles: A2DP, AVRCP V1.5, HFP V1.6, HSP V1.2
- Freq. Response: 20 Hz – 20 kHz
- Sensitivity: 105 dB SPL (sound pressure level) at 1 kHz
- Impedance: 16 Ohm
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>