ATAMIN B0BVVBMQLS Aria Plus 72 Floor Lamp Instruction Manual
- October 30, 2023
- ATAMIN
Table of Contents
ATAMIN B0BVVBMQLS Aria Plus 72 Floor Lamp
IMPORTANT SAFETY INSTRUCTIONS
This product contains a polarized plug, meaning one blade is wider than the
other, as a feature to reduce the risk of electric shock. This plug will fit
in a polarized outlet only. If you notice that the plug does not fit correctly
in the outlet, reverse the plug until it fits in. If the plug is unable to fit
the outlet please contact a qualified electrician. Only connect the polarized
plug with an extension cord if the plug can be fully inserted. PLEASE DO NOT
ALTER THE PLUG.
Max Wattage: (1) 150 watt incandescent or (2) 42 watt CFL equivalent.
(lncandescent/CFL are not included) (3) A 9 watt LED light bulb is included.
Customer Service
Please contact us via email. We are available Monday to Friday from 9am-5pm
PST if you need any help with your new lamp.
customerservice@atamin.com
You are also welcome to visit our website at
www.atamin.com and use the contact feature if you
have any questions.
Assembly Instructions
-
Step 1
Begin assembling Aria by securing the poles (C) and round bottom board (B) together using screws (A). Then, screw three two-sided bolts (D) into the poles (C) and place a round board (E) onto the bolts. -
Step 2
Repeat Step 1 . -
Step 3
Repeat step 2 but this time place charging station with lampholder board (F) onto the bolts. -
Step 4
Screw three poles (C) onto the bolts again then secure the lampholder board onto the poles (C) by using screws (A). Then put the lamp holder into the larger hole and drop the pull chain into the smaller hole, then tighten the lamp holder using the screw on the wire.
-
Step 5
Lay the magnetic lampshade (H) on a clean and flat surface. Then, press the top lampshade frame (I) and bottom lampshade frame (G) into the clips located inside the edges of the magnetic shade (H).
-
Step 6
Place the finished shade into the lamp holder and secure the lampshade using the shade ring (J). Lastly, use the zip tie (K) to hide the wire. (Optional)