HAMPTON BAY RS220121L3 3-Light Vanity Fixture User Manual
- October 30, 2023
- HAMPTON BAY
Table of Contents
HAMPTON BAY RS220121L3 3-Light Vanity Fixture
Product Information
The Item# 644212 Model# RS220121L3 is a 3-light vanity fixture from Hampton Bay. It is designed to enhance the lighting in your bathroom or dressing area. The fixture comes with pre-assembled mounting unit and includes mounting screws and wire nuts required for installation. The fixture requires electrical wiring and should be installed by a professional electrician.
Product Usage Instructions
- Safety Information: Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation. Please call Hampton Bay Customer Service at 1-855-HD-HAMPTON.
- Pre-Installation: Plan the installation and gather all necessary tools including a ladder, safety glasses, pliers, wire strippers, Phillips screwdriver, and flat blade screwdriver. Ensure that all hardware included in the package is available.
- Installation: Follow the installation steps provided in the manual. First, make the electrical connections by attaching the black (positive), white (neutral), and copper wire to ground wire with wire nuts (CC) and secure with electrical tape (not included). If the wires from the fixture are the same color, attach the side with markings or letters to the black (positive) wire and the other to the white (neutral) wire. Second, secure the light fixture to the mounting unit (AA) by securing it with the pre-installed ground screw (BB).
- Operation: Turn on the power and switch on the light to start using the fixture.
- Care and Cleaning: Turn off the power before cleaning the fixture. Use a soft cloth to wipe the fixture. Do not use abrasive materials or chemicals that may damage the finish of the fixture.
- Troubleshooting: If the bulb does not light, check if it is burnt out or if the power is off. If the fuse blows or circuit breaker trips when the light is turned on, check for faulty wire connections, crossed wires, or grounding out of the power wire.
Please call Hampton Bay Customer Service at 1-855-HD-HAMPTON for further assistance.
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service
- 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
- 1-855-HD-HAMPTON
- HAMPTONBAY.COM
THANK YOU
We appreciate the trust and confdence you have placed in Hampton Bay through
the purchase of this light fxture. We strive to continually create quality
products designed to enhance your home. Visit us online to see our full line
of products available for your home improvement needs. Thank you for choosing
Hampton Bay!
Safety Information
Consult a qualified electrician if you have any electrical questions.
- CAUTION: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation. Please call our Customer Service Team at 1-855-HD-HAMPTON.
- WARNING: Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
Warranty
The manufacturer warrants this lighting fixture to be free from defects in
materials and workmanship for a period of three (3) years from date of
purchase. This warranty applies only to the original consumer purchaser and
only to products used in normal use and service. If this product is found to
be defective, the manufacturer’s only obligation, and your exclusive remedy,
is the repair or replacement of the product at the manufacturer’s discretion,
provided that the product has not been damaged through misuse, abuse,
accident, modifications, alterations, neglect, or mishandling. This warranty
shall not apply to any product that is found to have been improperly
installed, set-
up, or used in any way not in accordance with the instructions supplied with
the product. This warranty shall not apply to a failure of the product as a
result of an accident, misuse, abuse, negligence, alteration, faulty
installation, or any other failure not relating to faulty material or
workmanship. This warranty shall not apply to the finish on any portion of the
product, such as surface and/or weathering, as this is considered normal wear
and tear. The manufacturer does not warrant and specially disclaims any
warranty, whether express or implied, of fitness for a particular purpose,
other than the warranty contained herein. The manufacturer specifically
disclaims any liability and shall not be liable for any consequential or
incidental loss or damage, including but not limited to any labor / expense
costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit
www.HAMPTONBAY.com.
Pre-Installation
PLANNING INSTALLATION
- Read all instructions before installation.
- To avoid damaging this product, assemble it on a soft, non-abrasive surface, such as carpet or cardboard.
- Keep your receipt and these instructions for proof of purchase.
TOOLS REQUIRED
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
| Part | Description | Quantity |
|---|---|---|
| AA | Mounting unit (pre-assembled with light fixture) | 1 |
| BB | Mounting screw | 2 |
| CC | Wire nut | 3 |
PACKAGE CONTENTS
| Part | Description | Quantity |
|---|---|---|
| A | Light fixture | 1 |
Installation
-
ATTACHING THE MOUNTING UNIT TO THE JUNCTION BOX
Remove the pre-installed socket ring from the socket of lamp base (A) and put them in a safe location. Attach the mounting unit (AA) to the junction box (not included) with the mounting screws (BB). -
MAKING THE ELECTRICAL CONNECTIONS
- Connect the copper wire from the light fixture (A) to the mounting unit (AA) by securing it with the pre-installed ground screw.
- Connect the black to black (power), the white to white (neutral) and copper wire to ground wire with the wire nuts (CC) and secure with electrical tape (not included).
NOTE: If the wires from the fixture are the same color, attach the side with markings or letters to the black (positive) wire and the other to the white (neutral) wire.
-
SECURING THE LIGHT FIXTURE
Secure the light fixture (A) by placing it over the mounting unit (AA) and securing it with the previously removed socket ring. -
INSTALLING THE LIGHT BULBS
Install three 60-watt max. medium-base incandescent bulbs or compatible CFL bulbs (not included).
Operation
TURNING THE LIGHT ON
Turn the light switch on to activate the fixture.
Care and Cleaning
- Clean the lamp with a soft, dry cloth.
- Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| The bulb will not light. | The bulb is burned out. | Replace the light bulb. |
| The power is off. | Ensure the power supply is On. | |
| There is a faulty wire connection. | Check the wiring. | |
| The circuit breaker is off. | Ensure the circuit breaker is in the On position. | |
| The fuse blows or circuit breaker trips when the light is turned on. | There | |
| are crossed wires or the power wire is grounding out. | Check the wire |
connections.
Contact a qualified electrician or call the Customer Service Team at 1-855-HD- HAMPTON.
ABOUT COMPANY
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service
- 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
- 1-855-HD-HAMPTON
- HAMPTONBAY.COM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>