sE Electronics V2 SWITCH Dynamic Multi Purpose Hand Held Microphone User Manual

V2 SWITCH
User Manual

Thank you
Thank you for choosing an sE product! In addition to some basic safety precautions, this manual includes details and specifications to help you get the most out of your microphone. Please take a few minutes to read through it.
Capturing excellent audio is our passion. We sincerely hope you’ll enjoy using this microphone as much as we’ve enjoyed designing and building it for you.
Happy Tracking, The sE Team

Brief Description

The V2 SWITCH is a dynamic multi-purpose hand-held microphone with an on/off switch. Thanks to its high level of sound quality, it allows for not only vocals and speech to be captured but also a plethora of other things, ranging from electric guitar cabinets to brass instruments, all the way to drums and choirs. The robust all-metal construction, stainless spring steel mesh grille and gold-plated XLR contacts ensure durability and reliability with no corrosion for many years. Tried and tested neodymium magnets, tight
production tolerances, and high workmanship ensure excellent sensitivity, high-end sound quality and superb consistency. The internal windscreen efficiently reduces unwanted wind noise and plosive pops.

What’s in the box

Your packaging should contain the follow items. If anything is missing, please contact your sE Electronics dealer and let them know.

• V2 SWITCH microphone
• microphone stand clip
•  thread adapter
•  pouch

Technical Specifications

Safety and maintenance

Warning
The product may contain small, detachable parts, which may cause choking, personal injury, or death, especially in children. Please exercise care in the use and handling of small parts and keep them away from children under four years of age.

• This product is safe under normal and reasonably foreseeable operating conditions.
• Do not open or modify the product.
• The product must be returned to the manufacturer or destinated vendors for any service or repair.
• Do not disassemble or attempt to service this product.
• This is not a children’s product and is not intended to be used by children under 14 years old.

Risk of damage
**** Please make sure that any piece of equipment to which your sE product will be connected fulfills the safety regulations enforced in your country and is fitted with a ground lead.

Compliance

This product complies with relevant legal requirements for Restriction of Hazardous Substances (RoHS) and management of waste electronic and electrical equipment (WEEE).
For RoHS and WEEE information, go to http://www.seelectronics.com/compliance
Maintenance is not required for product compliance.
Batteries, electronic and electrical equipment should not be disposed of with household waste. Wherever possible, they should be separated and brought to an appropriate collection point to be recycled and to avoid potential impact on the environment and/or human health. For more information, contact your local authorities or place of purchase, or visit http://www.seelectronics.com/recycling

Made in China

Warranty

sE Electronics warrants that its hardware product shall be free from defects in materials and workmanship beginning from the date of original retail purchase.
See http://www.seelectronics.com/warranty for specific warranty information about your product and procedures for a warranty claim.
sE Electronics’ entire liability and your exclusive remedy for any breach of warranty shall entail, at sE Electronics’ option, to repair or replace a functional equivalent of the product, or to refund the price paid, provided that the hardware is returned to the purchased location along with a receipt. Warranty protections are in addition to rights provided under local consumer laws and may vary among countries. See the full warranty information to know your consumer rights and the additional protections
provided by this product warranty.
Our headquarters: sE Electronics International, Inc.
448 Ignacio Boulevard, STE 411
Novato, CA 94949, USA
Our R&D and manufacturing center: EP Electronics 289 B2 West Songxiu Road, Shanghai 201703, China
Full Warranty Information: https://www.seelectronics.com/warranty

Support

In case you have any questions about your new sE product, please do not hesitate to contact us directly: http://www.seelectronics.com/contact- us
In the event that your new sE product is operating improperly, it must be returned to us as the manufacturer or to a destinated vendor for any service or repair. For the fastest and most direct service, please contact
your dealer first. If authorized service is required, it will be arranged by that dealer: http://www.seelectronics.com/dealers
If you are experiencing difficulties with support or assistance, please do not hesitate to contact us directly: http://www.seelectronics.com/contact-us
Lastly, please remember to register your new gear with sE to extend your warranty to a full three years: http://www.seelectronics.com/registration

Contact

Feel free to contact us:
sE Electronics International, Inc.
448 Ignacio Boulevard, STE 411
Novato, CA 94949, USA
Our international distributors & sales representatives: http://www.seelectronics.com/contact-us

IMPORTANT
WARRANTY REGISTRATION
Thank you for purchasing an sE product! You are automatically entitled to a two-year warranty but can extend this to a full three years with registration. To register your new equipment and to read the full warranty details, please go here: http://www.seelectronics.com/registration

Sincerely,
Your sE Team

References

• Blog - sE Electronics
• Contact - sE Electronics
• Retailer Archive - sE Electronics
• Blog - sE Electronics
• Register a product - sE Electronics
• Warranty - sE Electronics
• Warranty - sE Electronics

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>