sE Electronics V7 Dynamic Vocal Microphone User Manual
- June 4, 2024
- sE Electronics
Table of Contents
V7 Dynamic Vocal Microphone
User Manual
V7 Dynamic Vocal Microphone
Thank you
We would like to thank you cordially for choosing this sE microphone! This
manual contains some important instructions for setting up and operating your
new equipment. Please take a few minutes to read the instructions below
carefully. We hope you will enjoy working with it as much as we enjoyed
designing and building it for you.
Most Sincerely,
Your sE Team
Brief Description
The V7 and V3 are dynamic hand-held microphones ideal for vocal applications
on the stage. Thanks to their well-balanced, neutral sound, they also allow
the capture of nearly any source from electric guitar cabinets to brass
instruments, drums to the choir, and more – both in the studio and on the
stage.
The robust all-metal construction, stainless spring steel mesh grille, and
gold-plated XLR contacts ensure durability and reliability with no corrosion
for many years. Proven Neodymium magnets, tight production tolerances, and
high workmanship ensure excellent sensitivity, high-end sound quality, and
superb consistency.
The red internal windscreen efficiently reduces unwanted wind noise and
plosive pops. (And just in case you prefer a black windscreen, we have also
included one as a standard accessory for you.)
V7 only:
Thanks to its innovative, specialized aluminum voice coil, the V7 delivers a
crisp, open sound that perfectly captures your voice in the most natural way
you’ve ever heard on stage – and makes your sound engineer’s job easier than
ever.
With its super-cardioid pattern, the sophisticated capsule design also helps
isolate your voice or instrument from other sound sources on the stage –
efficiently reducing stage bleed from other instruments and ensuring high gain
before feedback. The capsule’s unique, patented suspension also helps
eliminate handling noise, footfall noise, and any rumble.
What’s in the box
Your packaging should contain the following items. If anything is missing, please contact your SE Electronics dealer and let them know.
- V7 / V3 microphone
- microphone stand clip
- thread adapter
- black internal windscreen
- pouch
Tips for practical use
Point the microphone directly toward the sound source as much as possible to
get a dry, direct sound and high gain before feedback.
The closer the distance from the microphone to the source, the more bass
you’ll get (“proximity effect”). Use this to your advantage when you want it,
and be aware of it when you don’t.
The fewer microphones you are using on the stage the better. Use just one
microphone per source to minimize risk feedback.
Make sure the microphone is positioned behind the PA speakers to reduce the
risk of feedback.
If several microphones are necessary (e.g. choir miking) apply the 3:1 rule:
The distance between the microphones should be at least three times the
distance of each microphone to its source.
Safety and maintenance
**Risk of damage
Please make sure that the piece of equipment to which your microphone will be
connected fulfills the safety regulations enforced in your country and is
fitted with a ground lead.
Cleaning the microphone**
After every use, clean the microphone with a dry, soft cloth tissue and store
it in a solid case or a zipper pouch.
Technical Specifications
| V7| V3
---|---|---
Capsule| dynamic| dynamic
Voice coil| Aluminum| Copper
Magnet| Neodymium| Neodymium
Polar patterns| Super cardioid| Cardioid
Frequency range| 40 — 19,000 Hz| 50 — 16,000 Hz
Sensitivity| 2.0 mV/Pa -54 dBV| 2.5 mV/Pa -52 dBV
Electrical Impedance| 300 ohms| 600 ohms
Connectivity| 3-pin male XLR connector| 3-pin male XLR connector
Dimensions| Diameter: 54 mm (2.12 in.)
Length 184 mm (7.24 in.)| Diameter: 52 mm (2.05 in.)
Length 181 mm (7.13 in.)
Weight| 305 g (10.8 oz)| 295 g (10.4 oz.)
Support
In case you are experiencing any problems or have any questions regarding your
sE product, please contact your dealer first for the fastest and more direct
service. If an authorized service is required, it will be arranged by that
dealer: http://www.seelectronics.com/dealers
If you still have difficulties with support or assistance, please do not
hesitate to contact us directly: http://www.seelectronics.com/contact-us
Lastly, remember to register your new gear to extend your warranty to a full
three years: http://www.seelectronics.com/registration
Contact
Feel free to contact us:
SE Electronics International, Inc.
PO Box 1049
6 Beach Road
Tiburon
CA 94920
USA
www.seelectronics.com
[email protected]
Our international distributors and sales representatives:
http://www.seelectronics.com/contact-us
This product conforms to the standards listed in the Declaration of
Conformity. Please contact us if you want to order a free copy of the
Declaration of Conformity
Technical data is subject to change without notice.
IMPORTANT
WARRANTY REGISTRATION
Thank you for purchasing an sE product!
You are automatically entitled to a two-year warranty but can extend this to a
full three years with registration.
To register your new equipment and to read the full warranty details, please
go here:
http://www.seelectronics.com/registration
Most Sincerely,
Your sE Team
References
- Home Page - sE Electronics
- Home Page - sE Electronics
- Contact - sE Electronics
- Retailer Archive - sE Electronics
- Register a product - sE Electronics