Longacre Sportsman Elite 3 Gauge Panel Oil Pressure Water Temperature Owner’s Manual
- October 30, 2023
- Longacre
Table of Contents
Longacre Sportsman Elite 3 Gauge Panel Oil Pressure Water Temperature
Product Information: SPORTSMAN™ ELITE GAUGES
The SPORTSMAN™ ELITE GAUGES are a set of gauges that can be used to monitor the temperature and other aspects of a vehicle. They come with three wires – yellow, orange, and black (for 3 & 4 gauge only) – that need to be connected to the ignition switch, water temp sender, and oil temp sender respectively. These gauges are suitable for use in dash panels that have 2, 3, or 4 gauges.
Product Usage Instructions
To use the SPORTSMAN™ ELITE GAUGES, follow the below instructions:
- Locate the ignition switch in your vehicle and connect the yellow wire to it. This will ensure that power is shut off when the motor is turned off.
- Find the water temp sender (included in the package) and install it in the intake manifold. Connect the orange wire to the sender.
- If you have a 3 or 4-gauge dash panel, locate the oil pan or cooler and install the oil temp sender (included in the package) there. Connect the black wire to the sender.
- Ensure that the gauges are properly grounded by connecting them to a suitable ground source. The ground wires are color-coded black.
- Once all the wires are connected, turn on the motor to see if the gauges are working properly. If they are not, check the connections and troubleshoot as necessary.
Following these instructions should help you install and use the SPORTSMAN™ ELITE GAUGES with ease.
WIRING CODE FOR DASH PANELS 2, 3, AND 4 GAUGE
- LIT-5097 Rev 2
INSTRUCTIONS
- YELLOW WIRE Connect to the ignition switch so power is shut off with the motor.
- ORANGE WIRE Connect to water temp sender (included) installed in the intake manifold (replacement #43250).
- BLACK WIRE (3 & 4 gauge only) Connect to oil temp sender (included) installed in oil pan or cooler (replacement #43350).
Read User Manual Online (PDF format)
Loading......