milwaukee 48-22-8586P 27 Inch High Capacity Steel Locker Owner’s Manual

October 30, 2023
Milwaukee

48-22-8586P 27 Inch High Capacity Steel Locker
Owner’s Manualmilwaukee 48 22 8586P 27 Inch High Capacity Steel
Locker

27″ HIGH CAPACITY STEEL LOCKER

WARNING To reduce the risk of injury, user must read and understand operator’s manual.

IMPORTANT SAFETY INSTRUCTIONS

WARNING
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in serious in-jury. Save all warnings and instructions for future reference.

  • Use the product in accordance with these instructions and in the manner intended, taking into account the working conditions. Use of the product for operations different from those intended could result in a hazardous situation.
  • Keep work area clean and well lit. Cluttered or dark areas invite accidents.
  • Fully assemble the product according to the assembly instructions. Do not leave off any pieces.
  • Do not modify the product in any way. Use only specifically recommended accessories. Drilling holes or modifying the product will lower the load capacity, which can cause the product to collapse, resulting in injury.
  • Lock wheels when product is not being moved. Unlocked wheels can allow the product to move unexpectedly.
  • Keep the product on a level surface. Do not load, unload, or park product on an incline. The product may become unbalanced and tip, resulting in injury.
  • Always balance the product load to avoid tipping. Unbalanced products are more likely to tip when being moved or when using the product work surfaces. Evenly distribute the weight front to back and side to side. To help prevent the product from tipping, load the product starting at the bottom.
  •  Do not exceed the maximum product weight, including contents. Do not exceed the maximum weight for each drawer. Overloaded products can tip, collapse, or damage drawer slides.
  • Keep children and bystanders away while loading, unloading, and moving the product. Distractions can cause you to lose control.
  • Only lift the product according to the instructions in this manual. Other methods may be dangerous, resulting in injury.
  • Only transport the product when empty. Properly secure when transporting.
  • Do not mount the product on a truck bed or any other moving object.
  • Lock door before rolling the product. The door could come open and make  the product unstable and tip.
  • Secure all items before rolling the product. Loose items could shift, causing the product to become unstable.
  • Do not use shelves as steps. Do not stand on the product. Product may tip, causing injury.
  • Do not step on shelves. Shelf may collapse or break. Product may tip, causing injury.
  • Do not use product in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. This equipment has internal arcing or sparking parts. Product should not be located in a recessed area or below floor level.
  • Maintain product. Check for misalignment or binding wheels, breakage or bending of shelves or other parts and any other condition that may affect the product’s operation. Do not use damaged product.
  • Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement.
  • Have your product serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.

SYMBOLOGY

| Warning
---|---
| Read Operator’s Manual
| Do not open more than one drawer at a time. Chest/cabinet may tip, causing injury.
| Lock wheels when chest/cabinet is not being moved. Unlocked wheels can allow the locker to move unexpectedly.
| Do not use drawers as steps. Chest/ cabinet may tip, causing injury.
| Lock both the lid and all drawers before moving the chest/cabinet.
| Tether free standing locker to wall.
Locker may tip, causing injury.

FUNCTIONAL DESCRIPTION

milwaukee 48 22 8586P 27 Inch High Capacity Steel Locker - FUNCTIONAL
DESCRIPTION

  1. 5″ Swivel caster
  2. Caster riser plate*
  3. Door storage bin
  4. Key
  5. Lock
  6. Shelf
  7. Shelf mounting clip
  8. Bumper
  9. Power strip and
    magnetic holder

*Install casters with riser plates when locker is connecting to MILWAUKEE storage which use 6″ x 2″ casters.

**GROUNDING

**

WARNING
Improperly connecting the grounding wire can result in the risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug pro-vided with the bench. Never remove the ground-ing prong from the plug. Do not use the bench if the cord or plug is damaged. If damaged, have it repaired before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician.
Benches with Three Prong Plugs
Benches marked “Grounding Required” have a power strip with a three wire cord and three prong grounding plug. The plug must be connected to a properly grounded outlet (See Figure A). If the power strip should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user, Fig. A reducing the risk of electric shock. The grounding prong in the plug is connected through the green wire inside the cord to the grounding system in the power strip. The green wire in the cord must be the only wire connected to the power strip’s grounding system and must never be attached to an electrically “live” terminal.   Your power strip must be plugged into an appropriate outlet, properly installed and grounded in accordance with all codes and ordinances. The plug and outlet should look like those in Figure A.

SPECIFICATIONS

Cat. No ……………………………….. 48-22-8586P
Shelf Capacity ………………………….. 150 lbs. (68 kg)
Door Storage Bins Capacity …………… 20 lbs. (9 kg)
Total Capacity ……………………….. 2000 lbs. (907 kg)
AC Input Volts …………………………… 125
Hertz …………………………………………. 60
Amps …………………………………………. 15
USB Output Volts…………………………….. 5
USB Amps …………………………………. 2.1
Recommended Ambient Operating
Temperature ……….. 0°F to 104°F (-15°C to 40°C)

ASSEMBLY

CAUTION
Be sure to follow the assembly instructions for the appropriate locker. Do not use power tools to assemble locker. Tighten bolts with hand wrenches.
Tools Required

**** **** **** ****
Phillips screwdriver Safety glasses 10 mm Wrench **13 mm

Wrench**

Hardware Included
NOTE: Items not shown to actual size.

Hardware Item Description Quantity
AA Bolt
M8 x 40 mm 16
BB Steel washer
19 x 8.5 x 2 mm 16
CC Screw Bolt
M6 x 16 mm 8
DD Steel washer
18 x 6.5 x 1 mm 8
EE Bolt
M6 x 24 mm 2
FF Steel washer
16 x 8 x 1.2 mm 4
GG Screw bolt
M4 x 16 mm 8
HH Screw bolt
M4 x 12 mm 4
II Anti-tip cable 2
JJ Wall bracket 2
KK Screw
ST5.5 x 70 mm 4
LL Wrench 1
Item Description Quantity
--- --- ---
Door storage bin 3
Shelf 4
Cord bracket 2
Caster riser plate
(only for use when connecting to storage unit that has 6″ casters) 2
5″ x 2″ swivel caster 4
Red plastic plug 5
Red plastic plug 5
Shelf clip 16
Power strip with
magnetic holder 1
Rubber bumper 4

Installing the Casters
CAUTION
Two people may be required to complete installation.

  1. Lay the locker on its back. Use the packaging material to protect the finish.

  2. Mount the four swivel casters with brake using four bolts (AA) and washers (BB) per caster.
    NOTE: When locker is connecting to MILWAUKEE storage which use 6″ x 2″ casters, install casters with the two caster riser plates.

  3. Tighten all bolts securely with a wrench.

  4. Return the locker to its upright position.

milwaukee 48 22 8586P 27 Inch High Capacity Steel Locker - upright
position*Only install riser plates when locker is connecting to MILWAUKEE storage which use 6″ x 2″ casters.

Installing the Bumpers
Attach the bumpers using two screws (GG) per bumper. Do not overtighten the screws.  milwaukee 48 22 8586P 27 Inch High Capacity Steel Locker -
Bumpers Installing the Shelves
For each shelf, place four shelf mounting clips, with the clips facing upward, at level height into the locker mounting rail slots. Insert shelf into locker (1) and fully seat onto shelf mounting clips (2). milwaukee 48 22 8586P 27
Inch High Capacity Steel Locker - ShelvesInstalling Magnetic Holder for Power Strip
Place magnetic holder in desired location while considering cord management.
Installing Cord Bracket
Install cord brackets in desired location using two bolts (HH) per bracket while considering cord management. milwaukee 48 22 8586P 27 Inch High
Capacity Steel Locker - BracketInstilling Door Storage Bins
Place each bin into the door mounting rail slots at the desired level height. milwaukee 48 22 8586P 27 Inch High Capacity Steel Locker -
Door Reversing the Locker Door
CAUTION
Two people may be required to complete installation.
The Locker Door is reversible to accommodate both left and right side orientations.

  1. Remove door storage bins from door interior.
  2. Remove door from locker by removing the screws in the hinge. Flip door and reinstall hinge on right side.
  3. Remove logo plate and the two black plastic plugs,
  4. Reinstall storage bins.

milwaukee 48 22 8586P 27 Inch High Capacity Steel Locker - Door
1 Installing the Wall Tether
WARNING
When locker is used as a standalone unit, it must be properly secured to a wall using the included wall tether cables. Failure to properly secure with the wall tether may be hazardous, resulting in injury or property damage. The locker must be secured into a  minimum of 2 wall studs using the hardware provided. Failure to do so may allow the locker to become unstable and tip. Do NOT attach using drywall anchors. If anchoring into masonry, use appropriate masonry anchors (not included).
Secure free standing locker to wall using provided wall tether hardware.milwaukee 48 22 8586P 27 Inch High Capacity Steel Locker - Wall
Tether

Connecting to Compatible MILWAUKEE Steel Storage
WARNING
Only connect to compatible MILWAUKEE steel storage. Modifying the locker to accept other steel storage may be hazardous, resulting in injury or property damage. When connected, the locker must be flush with the adjoining storage unit; to accomplish this two of the locker’s swivel casters will be removed during installation. Leaving the casters on will interfere with the overall caster function of the system.
CAUTION
Two people are required to complete installation. This step must be performed on level ground to prevent tipping or injury.
The MILWAUKEE Locker can be connected to select MILWAUKEE Chest/Cabinet and Mobile Work Stations. Depending upon your model, the connection steps may vary. For a complete listing of accessories, go online to www.milwaukeetool.com or contact a distributor.
NOTE: When locker is connecting to MILWAUKEE storage which use 6″ x 2″ casters, install casters with riser plates (See “Installing the Casters”).

  1. Determine which end of the adjoining storage unit the locker will be connected to.
    NOTE: The Locker Door is reversible to accommodate both left and right side orientations. See “Reversing the Locker Door”.

  2. Remove all components from the outside of the adjoining storage unit that will interfere in creating a flush connection to the locker (such as bumpers, corner extrusions, lift handles, side handles, brackets, chargers, and power strips). Remove all components from existing storage unit that interfere with creating a flush connection to the locker.

  3. Remove the contents, shelves, shelf mounting clips, and door storage bins from the locker.

  4. Remove all components from the outside of the locker unit that will interfere in creating a flush connection to the adjoining storage unit (such as bumpers and chargers).

  5. Lay the locker on its back. Use the packaging material to protect the finish.

  6. Remove the two swivel casters that will be nearest to the adjoining storage unit.milwaukee 48 22 8586P 27 Inch High Capacity Steel Locker - Steel Storage 1

  7. Place foam block adjacent to the bottom edge of the existing MILWAUKEE cabinet.

  8. Lock caster wheels on the Locker as unlocked wheels will cause a tipping hazard.

  9. Lift the Locker upright and set on top of the foam block. Locker should be stationary.

  10. Gently roll the existing MILWAUKEE cabinet directly adjacent to the upright Locker and align the attachment holes per diagram. This should create a flush connection.milwaukee 48 22 8586P 27 Inch High Capacity Steel Locker - Foam block

  11. Lock the caster wheels on the existing MILWAUKEE tool storage cabinet.

  12. Connect the locker to the adjoining MILWAUKEE cabinet using eight bolts (CC) and washers (DD) through the interior mounting rail slots of the locker into the adjoining storage unit. Space bolts evenly across the lower, mid, and upper sections of the locker as shown for the best connection. Tighten all bolts securely with a wrench.milwaukee 48 22 8586P 27 Inch High Capacity Steel Locker - securely

  13. Insert the red plastic plugs into the exposed press nut holes on the front of the storage unit and locker. Match the shape of the plug to correspond to the shape of the hole.

USB Power Outlet
The USB ports on the power outlet can be used to charge any device that uses less than 2.1A of DC electrical current.
NOTE: Any device that uses more than 2.1A of DC electrical current will trip a self-resetting overload and disable the output.

OPERATION

WARNING
To avoid injury or property damage, do not exceed maximum shelf capacity. Use care when moving the locker on incline or rough surface. Locker may tip if weight is not evenly distributed front to back and side to side. Place more than half the total load weight on the bottom shelves when possible.
Locking and Unlocking the Locker
Insert the key. Turn it fully left to lock, or fully right to unlock. Always remove the key after locking and unlocking.
Using the Caster Brakes To lock the swivel casters, step down on the levers marked ON. Be sure to lock all casters to prevent locker from rolling or swiveling. To unlock casters, push down on the levers marked OFF.
Moving the Locker on an Incline or Rough Surface
Take care that the locker does not tip or become unbalanced when moving it on an incline or rough surface. Do not exceed an incline of 10 degrees. Lock the locker and secure all items before moving.
Rolling the Locker
The locker is only intended for rolling short distances. Do not modify the locker in any way. Drilling holes or modifying the locker will lower the load capacity, which can cause the locker to collapse, resulting in injury. Lock the locker and secure all items before rolling.
Lifting the Locker
The locker is not intended to be lifted. However, if you need to lift, empty the locker and then place straps or forks inside and next to casters. Do not lift loaded lockers. Never lift by the side handle. Be sure all bystanders are moved away before lifting locker.

MAINTENANCE

WARNING
To reduce the risk of injury, contact MILWAUKEE Corporate After Sales Service Technical Support for ALL repairs and replacement parts.
Maintaining the Locker
Keep your locker in good repair by adopting a regular maintenance program. Before use, examine the general condition of your locker. Check for loose screws, misalignment, binding of wheels, broken parts and any other condition that may affect its safe operation.
Do not use a damaged locker.
Maintaining the Casters
Grease the casters annually using high quality bearing grease.milwaukee 48
22 8586P 27 Inch High Capacity Steel Locker -
Maintaining

Cleaning
This steel locker has been coated with industrial powder coating for a durable finish. To help protect the powder coated finish, do not allow harsh chemicals (oil, grease or other chemical) to remain on the powder coating surface. Use a glass cleaner to clean and maintain all surfaces of powder coating. Keep the locker handles and wheels clean, dry and free of oil or grease. Use only mild soap and a damp cloth to clean your locker since certain cleaning agents and solvents are harmful to plastics. Some of these include: gasoline, turpentine, lacquer thinner, chlorinated cleaning solvents, ammonia and house-hold detergents containing ammonia. Never use flammable or combustible solvents around locker.
Service
For service and repair information, including the ordering of service parts, call our Corporate After Sales Service Technical Support line at 1-800-SAWDUST, or visit our website at www.milwaukeetool.com.

WIRELESS COMMUNICATION

Pursuant to part 15.21 of the FCC Rules, you are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the product.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules and ISED-Canada’s license exempt RSS standards. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation.

ACCESSORIES

WARNING
Modifying the locker to accept other accessories may be hazardous, resulting in injury or property damage. Use only specifically recommended accessories according to the manufacturer’s instructions.
For a complete listing of accessories, go online to www.milwaukeetool.com or contact a distributor.
SERVICE – UNITED STATES
1-800-SAWDUST (1.800.729.3878)
Monday-Friday, 7:00 AM – 6:30 PM CST or visit www.milwaukeetool.com
Contact Corporate After Sales Service Technical Support with technical, service/repair, or warranty questions.
Email: metproductsupport@milwaukeetool.com
Become a Heavy Duty Club Member at www.milwaukeetool.com to receive important notifications regarding your tool purchases.
SERVICE – CANADA
Milwaukee Tool (Canada) Ltd
1.800.268.4015
Monday-Friday, 7:00 AM – 4:30 PM CST or visit www.milwaukeetool.ca

LIMITED WARRANTY USA & CANADA

Every MILWAUKEE steel storage chest and cabinet are warranted to the original purchaser only to be free from defects in material and workmanship. Subject to certain exceptions, MILWAUKEE will repair or replace any part on a chest or cabinet which, after examination, is determined by MILWAUKEE to be defective in material or workmanship for a period of three (3) years after the date of purchase. Return of the chest or cabinet to the place of purchase is required. A copy of the proof of purchase should be included with the return product. This warranty does not apply to damage that MILWAUKEE determines to be from repairs made or attempted by anyone other than MILWAUKEE authorized personnel, misuse, alterations, abuse, normal wear and tear, lack of maintenance, or accidents.
Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE steel storage chest or cabinet. The manufacturing date of the product will be used to determine the warranty period if no proof of purchase is provided at the time warranty service is requested. If you feel your product has a warranty defect, or if you need information on a service/replacement part, please contact MILWAUKEE at 1.800. SAWDUST (1.800.729.3878) for instructions.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF EVERY MILWAUKEE PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES, WRITTEN OR ORAL. TO THE EXTENT PERMITTED BY LAW, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE; TO THE EXTENT SUCH DISCLAIMER IS NOT PERMITTED BY LAW, SUCH IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THE APPLICABLE EXPRESS WARRANTY AS DESCRIBED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU, THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. This warranty applies to product sold in the U.S.A. and Canada only. Please consult the ‘Find a Service Center Search’ in the Parts & Service section of MILWAUKEE’s website www.milwaukeetool.com or call 1.800.SAWDUST (1.800.729.3878) to locate your nearest MILWAUKEE factory Service Center location.

MILWAUKEE TOOL
13135 West Lisbon Road
Brookfield, WI 53005 USA
58148586d1
04/22
Printed in China

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals