Shenzhen Dzh Industrial DM8100 2.4G Wireless Mouse User Manual
- June 5, 2024
- Shenzhen Dzh Industrial
Table of Contents
DM8100
2.4G Wireless Mouse
User’s Manual
Note: Please read the user manual carefully before you start using this product
Front
Back
Remark: Please according to the anode and cathode of the battery to
install batteries, please don’t charge the batteries, please don’t throw in
the fire, and please don’t mix different types of batteries or old and new
batteries, in order to avoid battery leakage or explosion. Please put the
battery in a cool and dry place and keep it away from children; please take
out the battery if the electrical appliance long time out of use.
Connection instructions:
Technical Specifications
- Product Size:109.83X64.52X30mm
- Mouse weight: 60g (without battery)
- Number of keys: 4 keys
- Working voltage: 3V
- Rate: 800/1200/1600dpi
- Working distance: 10m
- Working current: <10mA
- Sleep time: 10 minutes
- Awaken way ：Press key
- Sleep current：0.02mA
Troubleshooting
Please contact the after-sales service.
Copyright
It is forbidden to reproduce any part of this manual without the permission of
the seller.
Safety instructions
Do not open or repair this device, Do not use the device in a damp
environment. Clean the device with a dry cloth.
Mouse maintenance
- Please keep the keyboard away from liquid or humid environments, saunas, swimming pools, and steam rooms and don’t let the keyboard get wet in the rain.
- Please don’t expose the keyboard at too high or too low-temperature conditions.
- Please don’t put the keyboard under sun for a long time.
- Please don’t put the keyboard close to the flame, such as on cooking stoves, candles or fireplaces.
- Avoid sharp objects scratching products, and timely to recharge products to ensure the normal use.
Warranty Card
User information………………………….
Company or personage full name……………………………………..
Contact address………….
TEL………..
Zip………………………….
The purchased product name and model NO.
Purchased date………………………………
This reason due to the product broken and damage is not included on the warranty.
- accidents, misuse, improper operation, or any unauthorized maintenance, alteration, or disassembly;
- Improper operation or maintenance, violation of product instructions or improper connection of power during use;
- Or use consumables (such as spare batteries) that are not provided by the company but applicable laws Except where such restrictions are prohibited.
CE Statement
Herby, Shenzhen DZH Industrial Co., Ltd declares that this 2.4G Wireless
Mouse， DM8100 is in compliance with the essential requirements and other
relevant provisions of Directive 2014/53/EU. In accordance with Article 10(2)
and Article 10(10), this product is allowed to be used in all EU member
states.
Use the 2.4G Wireless Mouse in the environment with a temperature between 0℃
and 60℃,
The product shall only be connected to a USB interface of version USB2.0
Operation Frequency: 2405MHz ~ 2470MHz
Max Output Power:0.0028W
Manufacturer： Shenzhen DZH Industrial Co., Ltd
Address：3th Floor, YiTuo Mike Industrial A building, Bu Yong
Industrial D
zone, Shajing, Shenzhen, China
E-mail: [email protected]
DECLARATION OF CONFORMITY
I hereby declare that the product
Product: 2.4G Wireless Mouse
Model No.: DM8100
Trade Mark: N/A
Hardware Version: V1.3
Software Version: 5.3
(Name of viaduct, type or model, batch or serial number)
satisfies all the technical regulations applicable to the product within the
scope of Council Directives 2014/53/EU. 2014/35/EU and 2014/30/EU: and declare
that the same application has not been lodged with any other notified body.
EN IEC 62368-1:2020+A11:2020
ETSI EN 301 489-1 V2.2.3 (2019-11)
Final draft ETSI EN 301 489-3 V2.2.0 (2021-11)
ETSI EN 300 440 V2.2.1 (2018-07)
EN 50663:2017 EN 62479:2010
(Titlets) of regulations. standards. etc )
All essential radio test suites have been carried out.
NOTIFIED BODY i’ilraptil Labs Inc Address
575 Boulder Court.
Pleasanton. California 94566
USA
Identification Number: 2280
MANUFACTURER or AUTHORISED REPRESENTATIVE Address
Shenzhen DZH Industrial Co Ltd 3th Floor, YiTuo Mike Industrial A building, Bu
Yong Industrial D zone. Shajing. Shenzhen, China
This declaration is issued under the sole responsibility of the manufacturer
and if applicable. his authorized representative.
Point of contact:
Annie Li 860755-29951078/860755.29951079
(Name. telephone and fax number)
China 2022-04-29
Place,data of issue
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help This
device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions (1)this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.