CULINA UBSDVH60SS.1 Traditional Cooker Hood Instruction Manual

CULINA UBSDVH60SS.1 Traditional Cooker Hood

Product Information

The UBSDVH60SS.1 _UBSDVH90SS.1 is an appliance used for ventilation and extraction purposes in the kitchen. The package includes one piece of [01], one piece of [02], four pieces of [04], one piece of [03], one piece of [05], four pieces of [06], four pieces of [07], four pieces of [08] (4 x 40mm), and four pieces of [09] (4 x 30mm). This appliance must be installed by a qualified person, following the manufacturer’s instructions.

Product Usage Instructions

Safety
These instructions are for your safety. Please read the following instructions carefully before proceeding with the installation and use of this appliance.

• This appliance must be installed correctly by a qualified person, strictly following the manufacturer’s instructions.
• WARNING: Danger of electric shock! The power supply must be cut off before the appliance is installed completely.
• WARNING: There is a risk of electric shock and fire if cleaning is not carried out in accordance with these instructions.
• WARNING: Where applicable, this appliance is supplied with fixings. Please ensure you use the correct fixings suitable for the substrate where the appliance will be installed and that they are able to support the weight of the appliance.
• WARNING: Use only the same size of fittings and mounting screws as recommended in this instruction manual. Failure to follow these instructions may result in electrical hazards.
• WARNING: Switch off the appliance at the mains supply before carrying out any maintenance work or cleaning.
• WARNING: Accessible parts may become hot when used with cooking appliances. Young children should be kept away. Care should be taken to avoid touching the appliance.
• WARNING: Do not flame under the hood. To avoid the risk of fire, clean or replace the grease filter regularly and closely monitor pans containing hot oil.
• WARNING: Means for full disconnection must be incorporated in the fixed wiring in accordance with the local wiring installation rules for your country. An all-pole disconnection switch having a contact separation of at least 3mm in all poles should be connected during installation.
• WARNING: Before connecting the hood, check that the supplied voltage and frequency match with that indicated on the appliance rating plate. Failure to install the appliance in accordance with these instructions may result in a safety hazard. If in doubt, ask for advice instore or from a qualified installer.
• WARNING: Consult local regulations regarding extraction outlets and ensure these are complied with. Do not connect the hood to a ventilation or hot air duct containing combustion fumes from burning gas or other fuels. Confirm that room ventilation is appropriate with the local authorities.
• WARNING: The hood may stop working during an electrostatic discharge (e.g. lightning). This involves no risk of damage. Switch off the electricity supply to the hood and reconnect after one minute.
• WARNING: This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Keep the appliance and its supply cord out of the reach of children less than 8 years old.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a safety hazard.
• Do not install the appliance outdoors in a damp place or in an area which may be prone to water leaks such as under or near a sink unit. In the event of a water leak affecting the appliance, do not use and contact customer services to arrange for inspection.
• Do not use flammable sprays in close vicinity to the appliance.
• Please dispose of the packing material carefully. There is a fire risk if cleaning is not carried out in accordance with the instructions. Refer to the Care and Maintenance sections carefully for details on how to clean and replace the aluminium and carbon filters (if fitted).
• Refer to the Care and Maintenance section for details on the type of lamps that can be used and how to replace them.
• Do not use a steam cleaner for care and maintenance.
• The appliance is not intended to be operated by means of an external timer or separate remote control system.
• There shall be adequate ventilation of the room when the hood is used at the same time as appliances burning gas or other fuels. Ensure that the negative pressure of the installation site does not exceed 4 Pa (0.04 mbar) to ensure combustion fumes are not drawn back into the room.
• Do not use the hood if it shows signs of damage or imperfection. Contact customer services for assistance.
• The manufacturer declines all liability for personal or material damage as a result of misuse or incorrect installation of this appliance.
• The appliance is for domestic use only as an extractor hood.
• When installing the appliance, make sure that the following distances between the top of cooker or hob and the lowest part of the cooker hood must be observed:
  • Gas hobs: 750mm.
  • Electric hobs: 650mm.
• Important: If the room contains a fuel burning appliance, such as a gas, or oil fired, central heating boiler, which is not of the ‘Balanced Flue’ type, you should make sure that there is adequate air inlet into the room at all times so that fumes from the boiler are not drawn back into the room by the Cooker Hood.

Installation

The appliance must be installed correctly by a qualified person, strictly following the manufacturer’s instructions. Means for full disconnection must be incorporated in the fixed wiring in accordance with the local wiring installation rules for your country. If in doubt, ask for advice instore or from a qualified installer.

Choose a type of installation:

• A – Extraction option;
• B – Recirculation option

WARNING: Beware of any sharp edge of metal plates, wear suitable protective gloves when handling the product.

Mark the wall with the hole positions as shown in diagram.
WARNING: Caution! Before drilling it is extremely important to check the wall for hidden pipes, electrical cables etc using an appropriate detection device.

For wall mounting

For cupboard installation.

Only for ducted option.
Only for recirculation option

After installation, remove the protective film from cooker hood body (Only for Stainless Steel hood).

Care and Maintenance

Lamp replacement

• WARNING: Always switch off the electricity supply before carrying out maintenance work on the hood. In the event of a fault, contact customer services.
  NOTE: If the lamp fails please contact the after-sales care.

Carbon filter replacement
Replace carbon filters every three months.

1 X CARBON FILTER (NOT SUPPLIED). MODEL NUMBER SCF4 (UK & IE)
CARBON FILTER ORDERING HOTLINE
0344 800 1128 (UK)
014475261 (IE)

Aluminium grease filters cleaning
To avoid fires, clean thoroughly once a month. To do so, remove the filters and soak in hot water and detergent for an hour. If using a dishwasher, position the filters vertically to improve the cleaning process.

WARNING: Increase the filter cleaning/replacement frequency if the hood is used for more than 2 hours a day. Always use genuine filters from the manufacturer.
WARNING: Increase the filter cleaning/replacement frequency if the hood is used for more than 2 hours a day. Always use genuine filters from the manufacturer.

Troubleshooting

If the hood stops working during an electrostatic discharge (e.g. lightning), switch off the electricity supply to the hood and reconnect after one minute.

only.
tightly.
The light is on, but the fan does not work.| The fan blade is jammed.
The motor is damaged.
Both the light and motor do not work.| Light bulb blown.| Contact Customer Services on.
Power connection loose.| Check power supply.
Suction performance reduced.| Speed may be too low.| Select a higher speed.
| Care and maintenance section).
Top vent might be obstructed.| Clear any obstruction.
Optional vent kit might be twisted.| according to the manufacturer’s instructions.
The installation may not comply with the manufacturers instructions.| The vent hose should be correct diameter throughout with no reductions or restriction.(See installation section).
Works normally but cooking smells linger.| recirculation mode or is full of grease.| maintenance section).
The hood does not work.| Check that the hood is connected to power. Check that the fuses or automatic have not jumped.
The hood still does not work.| If, after having checked the points mentioned above, your problem has not yet been solved, contact the technical service or your distributor.

Direct Connection
All installation must be carried out by a competent person or qualified electrician. Before connecting the mains supply ensure that the mains voltage corresponds to the voltage on the rating plate.
The appliance must be connected directly to the mains using an omnipolar circuit breaker with a minimum opening of 3mm between the contacts.
The installer must ensure that the correct electrical connection has been made and that it complies with the wiring diagram.
The cable must not be bent or compressed.
Regularly check the power plug and power cord for damage. If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.

WARNING: This is a Class I appliance and MUST be earthed

This appliance is supplied with a 3 core mains cable coloured as follows:

• Brown = L or Live
• Blue = N or Neutral
• Green and Yellow = E or Earth
  

The fuse must be rated at 3 Amps.
To avoid the risks that are always present when you use an electrical appliance it is important that this appliance is installed correctly and that you read the safety instructions carefully to avoid misuse and hazards. Please keep this instruction booklet for future reference and pass it on to any future owners. After unpacking the appliance please check that it is not damaged. If in doubt, do not use the appliance but contact Customer Services.
The manufacturer declines all liability for damage caused to persons and objects due to incorrect or improper installation of the appliance. Any permanent electrical installation must comply with the latest wiring regulations applicable to your country and for your own safety a qualified electrician or contractor should undertake the electrical installation.

Recycling and Disposal

Dispose of the appliance in accordance with local regulations. Do not dispose of the appliance with normal household waste.
Waste electrical products (WEEE) should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local governmental authority, domestic waste disposal services or the retailer where the product was bought for recycling advice.
The wheelie bin symbol on the product or its packaging indicates that this product cannot be treated as normal household waste. This product must be handed over to an electric and electronic equipment collection point for recycling. On ensuring that this product is disposed of correctly, you will help to avoid possible negative consequences for the environment and public health, which could occur if this product is not handled correctly.

Technical Data

Refer to the technical data provided in the user manual for more information.

Information for EU No. 66/2014 and No. 65/2014
A. Information of the cooker hood

| Symbol| Value| Unit
---|---|---|---
Model Identification| UBSDVH60SS.1| UBSDVH90SS.1
Annual Energy Consumption| AEC hood| 34.9| KWh/a
Time increase factor| f| 1.7|
Fluid Dynamic Efficiency| FDE hood| 8.9|
Energy Efficiency Index| EEI hood| 75.9|
Measured air flow rate at best efficiency point| Q BEP| 131.6| M3/h
Measured air pressure at best efficiency point| P BEP| 133| PA
Maximum air flow| Q MAX| 190.8| M3/h
Air flow in normal use| | Highest setting: 189.5
Lowest setting: 97.7| M3/h
Measured electric power input at best efficiency point| W BEP| 54.4| W
Nominal power of the lighting system| W L| 1.5| W
Average illumination of the lighting system on the cooking surface| E middle| 90| 80| lux
Lighting Efficiency| LE hood| 60| 53.3| lux/watt
Measured power consumption in standby mode| P s| –| W
Measured power consumption off mode| P o| 0| W
Sound power level| L WA| Max.63 / Min.47| dB
Grease Filtering Efficiency| GFE hood| 67.2| %

The measurement and calculation method of the above table was done in accordance with Commission Delegated Regulation (EU) No 65/2014 & Commission Regulation (EU) No 66/2014.

B. The following shows how to reduce total environmental impact (e.g. energy use) of the cooking process.

1. Install the cooker hood in a proper place where there is efficient ventilation.
2. Clean the cooker hood regularly so as not to block the airway.
3. Remember to switch off the cooker hood light after cooking.
4. Remember to switch off the cooker hood after cooking.

C. Information for dismantling.
This appliance cannot be dismantled by the user, other than that as shown in the original assembly of the user manual.
At the end of its useful life, the appliance should not be disposed of with household waste. Check with your local governmental authority, domestic waste disposal services or the retailer where the product was bought for recycling advice.

Appendix
Refer to the user manual appendix for additional information.

Pacakge Content

Checking instructions

Things to check before you start

• To avoid the risks that are always present when you use an electrical appliance it is important that this cooker hood is installed correctly and that you read the safety instructions carefully to avoid misuse and hazards. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners. After unpacking the cooker hood please check that it is not damaged. If in doubt, do not use the appliance but contact Customer Services on 0344 800 1128 (UK) and 01 4475261 (Ireland).
• Check the package and make sure you have all of the parts listed.
• Decide on the appropriate location for your product.
• If this product contains glass please take care with fitting or handing to prevent personal injury or damage to the product.
• This specifications plate is available on this appliance. This plate displays all the necessary identification information for ordering replacement parts.
• If you sell the appliance, give it away, or leave it behind when you move house, make sure you also pass on this manual so that the new owner can become familiar with the appliance and its safety warnings.

Accessories not supplied

Before you start

• WARNING: Read the instructions before using the appliance.
  Switch on the appliance at the switched fused connection unit. The appliance is ready for use.

Function & Settings

Touch control panel

To obtain the best results from your cooker hood it is recommended that you leave it switched on for 15 minutes after you have finished cooking.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>