HueRich HR-2G4009S 2.4G Remote Control Instruction Manual
- June 13, 2024
- HueRich
Table of Contents
HueRich HR-2G4009S 2.4G Remote Control
Functional features
This product is a high-performance LED bulb supporting remote control,
wireless remote control, control light switch and timing off, adjust
brightness, color temperature. No additional wiring, simple installation, easy
operation, safe and stable. The intelligent lighting of lamps is realized,
which is suitable for different scene requirements without other changes.
2.4G high frequency wireless remote control, with low power consumption, long
transmission distance, strong anti-interference ability, high air
communication rate characteristics. The remote control is stylish and
beautiful in appearance, practical and simple in function, and comes with
power off memory (that is, when it is turned off or turned on again after
power off, the bulb will automatically retain the light state before
shutdown). And has a small night light, and other specific scene one-click
direct function. Can directly replace the traditional lamps, widely used in
living room, kitchen, living room, hotel, club, meeting room and other places.
Remote control key mapping
Basic function operations
Code : The remote control can only be used after code operation with the
LED bulb light, the method is as follows:
Install the LED bulb, confirm that the power connection is complete, cut off
the power 10 seconds after the power to reconnect the power, in the power on
instant (within 5 seconds), press the remote control on the key, the bulb will
flash, indicating that the code is successful.
Note : One remote control can control a maximum of 15 bulbs, but a bulb
can only accept a maximum of three remote control matches.
FCC warning statements:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, usesr and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Caution : Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>