peach BTS06 Bluetooth Shower Speaker Instruction Manual

peach BTS06 Bluetooth Shower Speaker

Bluetooth Shower Speaker Instruction Booklet

Safety Instructions:

1. Keep the device away from heat, direct sunlight and sharp edges.
2. Keep the device away from naked flames.
3. Do not insert any metal objects into the device. Risk of shortcut.

Button Descriptions

Tips:

You can press Phone button twice quickly to redial the last phone number. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Product Overview:

Accessories Included:

1. USB Charging cable.

Charge Integrated Battery:

This Bluetooth speaker is powered by integrated rechargeable lithium battery. Charge the battery as follows:

1. 1. Insert the charging cable into the DC 5 V socket on the unit.

2. Connect the USB plug into the PC or AC/DC adaptor. The LED indicator turns red and the battery is being charged.
3. When the battery is fully charged, the red LED indicator goes out.

Pairing the BTS-06 to your phone or other devices:

Activate the Bluetooth speaker’s pairing mode by pressing and holding down the on/off button for about 6 seconds or until the red LED or blue LED are flashing. Now the speaker is ready for pairing.

Tips:

1. Turn on your mobile phone and activate the Bluetooth function.
2. Search for Bluetooth devices. BTS-06 will show up.
3. Pair your device with BTS-06. If a password is needed, type in 0000. After BTS-06 is paired with your device, it is ready to use.
4. Once this speaker is paired and connected to your mobile phone, next time when you switch on this speaker, it will connect to your mobile phone automatically as long as the Bluetooth in your mobile is on.

PRINT COLOUR

Product Usage Instructions:

To use the Bluetooth Shower Speaker, follow these steps:

1. Charge the integrated rechargeable lithium battery by inserting the charging cable into the DC 5 V socket on the unit and connecting the USB plug to the PC or AC/DC adaptor. The LED indicator turns red and the battery is being charged. When the battery is fully charged, the red LED indicator goes out.
2. To pair the speaker to your device, activate the Bluetooth speaker’s pairing mode by pressing and holding down the on/off button for about 6 seconds or until the red LED or blue LED are flashing. Turn on your mobile phone and activate the Bluetooth function. Search for Bluetooth devices and select BTS-06. If a password is needed, type in 0000. After BTS-06 is paired with your device, it is ready to use.
3. Once the speaker is paired and connected to your mobile phone, you can play music or take calls through the speaker. The Phone button can be pressed twice quickly to redial the last phone number.

Note that the device should be kept away from heat, direct sunlight, sharp edges, and naked flames. Do not insert any metal objects into the device as there is a risk of shortcuts.

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF wmning for Portable device:The device has been evaluated to meet the general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>