LG TLVLM3IU-N Telematics User Manual
- October 30, 2023
- LG
Table of Contents
LG TLVLM3IU-N Telematics
Product Information
The Telematics TLVLM3IU-N is an Online Connectivity Unit (OCU) by LG Electronics Inc. It is a telematics product that supports emergency call and LTE services. The device has the following features:
- Support for GPS, GNSS, Beidu, Galileo, and SBAS
- Support for GSM 850/1900, WCDMA B2/B4/B5, and LTE FDD B2/B4/B5/B12/B17 bands
- Qualcomm MDM9628 modem chip
- No Bluetooth or 2.4 GHz WiFi support (only b,g,n20)
- Dimensions: 130mm x 70.14mm x 37.5mm
- Weight: 300g
- Power: DC 12V, 2A
Product Usage Instructions
To use the Telematics TLVLM3IU-N:
- Connect the device to a power source using the DC 12V, 2A power supply.
- The device supports GPS, GNSS, Beidu, Galileo, and SBAS. Ensure that the device is in an open area and the antennas are not obstructed for optimal satellite signal reception.
- The device supports GSM 850/1900, WCDMA B2/B4/B5, and LTE FDD B2/B4/B5/B12/B17 bands. Check if your SIM card is compatible with any of these bands.
- The device does not support Bluetooth or 2.4 GHz WiFi (only b,g,n20). Connect to a compatible WiFi network, if available.
- The device has a dimension of 130mm x 70.14mm x 37.5mm and weighs 300g. Place the device in a secure location.
- Ensure that the device is installed and operated with a minimum distance of 20cm between the radiating element of the device and the user, in compliance with FCC radiation exposure limits.
- Follow the FCC notice to avoid interference with other equipment:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
What is the OCU(Online Connectivity Unit)
Product Image
Telematics product supporting Emergency Call/LTE service service
Function
- Emergency Call
- Mobile Online Services
- Positioning/Dead Reckoning
- GPS/GNSS/Beidu/Galileo/SBAS
Specification
Technical Specification
Supporting Bands
|
GSM 850/1900 WCDMA B2/B4/B5
LTE FDD B2/B4/B5/B12/B17
---|---
Modem Chip| Qualcomm MDM9628
GNSS| GPS/Glonass/Beidou/SBAS/Galileo
Bluetooth| No
WiFi| 2.4 GHz WIFI(b,g,n20)
Size| 130mm x 70.14mm x 37.5mm
Weight| 300g
Power| DC 12V , 2A
Dimension
FCC NOTICE
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiating element of this device and the user.
IC
- This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
- This radio transmitter has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p) is not more than that necessary for successful communication.
- This device should be installed and operated with minimum distance 20cm between the radiating element of this device and the user.
- Acceptable antenna peak gain (incl. cable att.) = ERP or EIRP Limit(FCC) – Max tune-up conducted power
The maximum antenna gain including cable att. must not exceed the table below.Frequency Band| Acceptable antenna peak gain (incl. cable att.) (dBi) (ERP or EIRP Limit(FCC) – Max tune-up conducted power)
---|---
699-716MHz(B12,17)| 10.6
777-787MHz(B13)| 11.1
824-849MHz(B5)| 7.6
1710-1755MHz(B4)| 6
1850-1910MHz(B2)| 2
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>