HAMPTON BAY CP0902 Bourland Semi Flushmount Instruction Manual
- October 30, 2023
- HAMPTON BAY
Table of Contents
HAMPTON BAY CP0902 Bourland Semi Flushmount
Product Information
- Product Name: Bourland Semi Flushmount
- Item Numbers: 1001225415 / 1007836491
- Model Numbers: CP0902 / BK0902
- Brand: Hampton Bay
Use and Care Guide:
If you have any questions, problems or missing parts related to the
product, please call Hampton Bay Customer Service before returning to the
store. Hampton Bay creates quality products designed to enhance your home.
Visit their website to see their full line of products available for your home
improvement needs. Thank you for choosing Hampton Bay!
Safety Information:
- Consult a qualified electrician for any electrical questions.
- Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation. Please call customer service.
- Before starting the installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
Warranty:
Contact the Customer Service Team at 1-800-986-3460 or visit
www.homedepot.com/homedecorators
for warranty information.
Pre-Installation:
- Read all instructions before installation.
- To avoid damaging the product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
- Keep the receipt and instructions for proof of purchase.
Tools Required:
- Ladder
- Safety glasses
- Electrical tape
- Phillips screwdriver
- Flat blade screwdriver
- Pliers
- Wire strippers
Hardware Included:
Note: Hardware not shown to actual size.
| Part | Description | Quantity |
|---|---|---|
| AA | Mounting unit | 1 |
| BB | Mounting screw | 2 |
| CC | Support screw | 2 |
| DD | Wire nut | 3 |
| EE | Cap nut | 2 |
| Package Contents: Part | Description | Quantity |
|---|---|---|
| A | Lighting fixture | 1 |
| B | Glass shade | 3 |
| C | Glass disc | 1 |
| D | Pipe nipple | 1 |
| E | Metal clip | 3 |
| F | Canopy | 1 |
| G | Tube | 1 |
Please contact 1-800-986-3460 for further assistance.
Product Usage Instructions
- Consult a qualified electrician for any electrical questions.
- Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation. Please call customer service.
- Before starting the installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
- Read all instructions before installation.
- To avoid damaging the product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
- Keep the receipt and instructions for proof of purchase.
- Use the tools required for installation: Ladder, Safety glasses, Electrical tape, Phillips screwdriver, Flat blade screwdriver, Pliers, Wire strippers.
- Install the mounting unit using the mounting screws and support screws provided.
- Connect the wires from the lighting fixture to the corresponding wires from the ceiling using wire nuts.
- Attach the glass shade and glass disc to the lighting fixture using metal clips.
- Attach the pipe nipple to the lighting fixture and then attach the canopy to the pipe nipple using cap nuts.
- Once installation is complete, turn on the power and test the light fixture.
- If you have any questions or problems with the product, please call Hampton Bay Customer Service for assistance.
THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through
the purchase of this light fixture. We strive to continually create quality
products designed to enhance your home. Visit us online to see our full line
of products available for your home improvement needs. Thank you for choosing
Hampton Bay!
Safety Information
- Consult a qualified electrician if you have any electrical questions.
CAUTION:
Inspect the wire insulation for any cuts, abrasions, or exposed copper that
may have resulted during shipping. If there is a defect in the wire, do not
attempt installation. Please call our Customer Service Team at 1-855-HD-
HAMPTON.
WARNING:
Before starting installation of this fixture or removal of a previous fixture,
disconnect the power by turning off the circuit breaker or by removing the
fuse at the fuse box.
Warranty
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for period of three (3) years from date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect, or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear. The manufacturer does not warrant and specially disclaims any warranty, whether express or implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor expense costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HAMPTONBAY.com.
Pre-Installation
PLANNING INSTALLATION
- Read all instructions before installation.
- To avoid damaging this product, assemble it on a soft, non-abrasive surface, such as carpet or cardboard.
- Keep your receipt and these instructions for proof of purchase.
TOOLS REQUIRED
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
| Part | Description | Quantity |
|---|---|---|
| AA | Mounting unit | 1 |
| BB | Mounting screw | 2 |
| CC | Support screw | 2 |
| DD | Wire nut | 3 |
| EE | Cap nut | 2 |
PACKAGE CONTENTS
| Part | Description | Quantity |
|---|---|---|
| A | Lighting fixture | 1 |
| B | Glass shade | 3 |
| C | Glass disc | 1 |
| D | Pipe nipple | 1 |
| E | Metal clip | 3 |
| F | Canopy | 1 |
| G | Tube | 1 |
Installation
-
Attaching metal clips to glass shades
- Remove the thumb screws and L-bracket from the pre-assembled metal clips (E).
- Place the screw through the glass shades (B) as shown.
-
Securing the metal clip
- Place the previously removed L-bracket on the metal clip and secure with the previosuly removed thumb screws.
- Place the previously removed L-bracket on the metal clip and secure with the previosuly removed thumb screws.
-
Attaching metal clips to the fixture
- Remove the pre-installed thumb screws from the fixture (A) and use them to secure the L-brackets on the metal clips (E) to the fixture (A).
-
Attaching the canopy to the fixture
- Thread the wires from the fixture (A) through the metal tube (G) and the canopy (F) and secure the canopy (F) to the fixture (A).
- Thread the wires from the fixture (A) through the metal tube (G) and the canopy (F) and secure the canopy (F) to the fixture (A).
-
Installing the light bulbs
- Install three 60-watt max. medium- base incandescent bulbs or three 13-watt max. CFL bulbs (none included)
- Remove the pre-installed washers and finial from the pipe nipple (D). Secure the pipe nipple (D) to the fixture (A) and place the previously removed metal washer and plastic washer. Add the glass disc (C) and secure with the previously removed plastic washer and finial.
-
Attaching the mounting bracket to the junction box
- Screw the support screws (CC) into the mounting unit (AA).
- Attach the mounting unit (AA) to the junction box (not included) with mounting screws (BB).
NOTE: The preinstalled support screws on the mounting unit (AA) should protrude out away from the junction box.
-
Making the electrical connections
- Connect the copper wire from the light fixture (A) to the mounting unit (AA) by securing it with the preinstalled ground screw.
- Connect the black to black (power), the white to white (neutral) and copper wire to ground wire with the wire nuts (DD) and secure with electrical tape (not included).
-
Securing the canopy to the outlet box
- Secure the canopy (F) to the junction box by placing the holes in the canopy (F) over the support screws (CC). Secure with the cap nuts (EE) as shown.
Operation
Turning on the light
- Turn the light switch on to activate the fixture.
Care and Cleaning
- Clean the lamp with a soft, dry cloth.
- Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Troubleshooting
| Problem | Possible Cause | Possible Cause |
|---|---|---|
| The bulb will not light. | The bulb is burned out. | Replace the light bulb. |
| The power is off. | Ensure the power supply is On. | |
| There is a faulty wire connection. | Check the wiring. | |
| The circuit breaker is off. | Ensure the circuit breaker is in the ON position. | |
| The fuse blows or circuit breaker trips when the light is turned on. | There | |
| are crossed wires or the power wire is grounding out. | Check the wire |
connections.
1-855-HD-HAMPTON.
Questions, problems, missing parts?
Before returning to the store, call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM.
Retain this manual for future use.
References
- Hampton Bay - The Home Depot
- Home Decorators Collection - Home Decor - The Home Depot
- Hampton Bay - The Home Depot
- Home Decorators Collection - Home Decor - The Home Depot