WILLIAMS SOUND RPK 005 Rack Panel Kit Instruction Manual
- October 30, 2023
- WILLIAMS SOUND
Table of Contents
WILLIAMS SOUND RPK 005 Rack Panel Kit
Product Information: Rack Panel Kit
The Rack Panel Kit is available in two models – Model RPK 005 Single Rack Panel Kit and Model RPK 006 Dual Rack Panel Kit. These kits are designed for use with Williams Sound 1/2 rack products. The RPK 005 kit includes a short and a long rack ear, 2 sets of 6-32 x 3/8 screws, an optional set-back, and a hole plug. The RPK 006 kit includes a short rack ear, 2 sets of 6-32 x 3/8 screws, 1/2 rack product linking bars, a clearance hole, a threaded hole, an optional set-back, 4 sets of 6-32 x 3/8 screws, and 2 sets of 4-40 x 3/4 screws.
Product Usage Instructions: Rack Panel Kit
RPK 005 Kit Installation Steps
- Attach the short and long rack ears as shown with four 6-32 x 3/8 machine screws. Use the front set of holes on the rack ears for a flush mount. Use the rear set of holes on the rack ears for a 1 recessed mount.
- Attach the rack panel assembly to the rack with the machine screws and nylon washers provided.
RPK 006 Kit Installation Steps
- Attach the short rack ears as shown with four 6-32 x 3/8 machine screws. Use the front set of holes on the rack ears for a flush mount. Use the rear set of holes on the rack ears for a 1 recessed mount.
- Attach the linking bars to each 1/2 rack unit as shown with four 6-32 x 3/8 machine screws. Be sure to install the linking bars so the clearance hole in one bar is next to the threaded hole in the other.
- Place the two 1/2 rack units together, so the linking bars overlap. Use two 4-40 x 3/4 machine screws to tie the linking bars together, as shown in the lower drawing.
- Attach the rack panel assembly to the rack with the machinescrews and nylon washers provided.
Recycling Instructions
Please dispose of your equipment properly. If you are a customer in the European Union, please do NOT dispose of your equipment in the household trash. Please take the equipment to an electronics recycling center. For more information, contact Williams AV at info@williamsav.com or visit www.williamsav.com. You can also call 800-843-3544 or INTL: +1-952-943-2252.
Model RPK 005 Single Rack Panel Kit
Model RPK 006 Dual Rack Panel Kit
For use with Williams Sound 1/2 rack products
Installation Instructions
RPK 005 Installation Steps
- Attach the short and long rack ears as shown with four 6-32 x 3⁄8″ machine screws. Use the front set of holes on the rack ears for a flush mount. Use the rear set of holes on the rack ears for a 1″ recessed mount.
- Attach the rack panel assembly to the rack with the machine screws and nylon washers provide
RPK 006 Installation Steps
- Attach the short rack ears as shown with four 6-32 x 3⁄8″ machine screws. Use the front set of holes on the rack ears for a flush mount. Use the rear set of holes on the rack ears for a 1″ recessed mount.
- Attach the linking bars to each 1⁄2 rack unit as shown with four 6-32 x 3⁄8″ machine screws. Be sure to install the linking bars so the clearance hole in one bar is next to the threaded hole in the other.
- Place the two 1⁄2 rack units together, so the linking bars overlap. Use two 4-40 x 3⁄4″ machine screws to tie the linking bars together, as shown in the lower drawing.
- Attach the rack panel assembly to the rack with the machine screws and nylon washers provided.
Recycling Instructions
Help Williams AV protect the environment! Please take the time to dispose of your equipment properly.
Product Recycling for Customers in the European Union
info@williamsav.com / www.williamsav.com 800-843-3544 / INTL: +1-952-943-2252 © 2Please do NOT dispose of your equipment in the household trash. Please take the equipment to an electronics recycling center.
info@williamsav.com /
www.williamsav.com
800-843-3544 / INTL: +1-952-943-2252
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>