Eminent EM4050 54Mbps Wireless Router Specifications And Datasheet
- October 30, 2023
- EMINENT
Table of Contents
Eminent EM4050 54Mbps Wireless Router
INTRODUCTION
The Eminent wLINK perfectly allows you to create your own secured, wireless network in a matter of minutes. The wLINK is a wireless base station that is able to provide your home with a wireless network. The wLINK performs at a high level so that your wireless network is stable and flexible. Enjoy your wireless network and let the wLINK do all the work!
Connect the wLINK to a cable modem or ADSL modem in order to make the connection wireless. The enclosed cd-rom contains an installation wizard that shows you how to install the wLINK. From that moment on a wireless network is accessible from all your pc’s and notebooks.
Assume you have a wireless network, but from the other rooms or from the garden you can not access it. Then the wLINK is the solution for you! You easily extend your network with a (second) wLINK. Install the wLINK as a signal booster to enjoy your wireless network wherever you want. The Eminent wLINK consists of high-quality components. The wLINK has a high-performance processor and extra memory for higher data transfer rates. In this way we optimize the performance of your wireless network.
In order to have access to a wireless network you need to have an installed, wireless network adapter on your pc or notebook. If you already have one, it will seamlessly operate with the wLINK. Don’t you have a wireless network adapter yet? Then you can use the wLINK in combination with an Eminent network adapter for optimal results all-over (wNOTE, wDESK, and wBUS). So pay attention to the products marked with the unique ‘Eminent wLINK’ logo!
TECHNICAL SPECIFICATIONS
- Interface: 4x RJ45 LAN port, 1x RJ45 WAN port, 1x Detachable rSMA antenna
- Wireless standard: 11g/b, 802.3, 802.3u
- Frequency: ISM-Band 2.412~2.4897Ghz
- Modulation: 11g: OFDM/802.11b: CCK, DQPSK, DBPSK
- Media Access Protocol: CSMA/CA met ACK
- Transmitter power: 16dBm
- Receiver sensitivity: 11g: 54Mbps 10-5 BER @ -73dBm
- Protocols: TCP/IP, IPX, NetBEUI
- Security: 64/128-Bit WEP, WPA, WPA2, WPA+WPA2, VPN Pass-Through, Firewall
- Management: Web-based management, firmware upgrade
SYSTEM REQUIREMENTS
- At least one available USB port
- EAN CODE: 8716065211559
KEY FEATURES
- Wireless router, access point, and signal booster
- The all-in-one solution for a wireless network
- Numerous wireless security techniques (firewall, WEP, WPA, WPA2)
- Increased throughput and high-performance wireless connection
- Unique, easy-to-use installation wizard
- Easy installation
- 5-Year warranty
- Accessible helpdesk
FAQ’s
How do I set up the Eminent EM4050 Wireless Router?
The specific setup process may vary, but generally, you need to connect the router to your modem using an Ethernet cable, access the router's administration interface through a web browser, and follow the provided setup instructions to configure the network settings.
How can I change the wireless network name (SSID) and password?
Access the router's administration interface, usually through a web browser, navigate to the wireless settings section, and look for options to modify the SSID (network name) and password (security key). Save the changes, and your wireless network will use the new settings.
How many devices can connect to the Eminent EM4050 Wireless Router simultaneously?
The maximum number of devices that can connect to the router simultaneously depends on its specifications. However, most modern routers can handle a significant number of connections, typically ranging from 20 to 50 devices or more.
What security features are available on the Eminent EM4050 Wireless Router?
The specific security features may vary, but common ones include support for encryption protocols like WEP, WPA, or WPA2, the ability to set up a guest network for visitors, and the inclusion of a firewall to protect against unauthorized access.
How can I troubleshoot connection issues with the Eminent EM4050 Wireless Router?
If you're experiencing connection issues, try the following steps: ensure that all cables are properly connected, restart the router and the connected devices, check for any firmware updates for the router, reset the router to its factory default settings if necessary, and contact the manufacturer's customer support for further assistance.
Can I use the Eminent EM4050 Wireless Router with my existing internet service provider?
Yes, the Eminent EM4050 Wireless Router should be compatible with most internet service providers. However, it's always a good idea to check the router's specifications or consult with your ISP to ensure compatibility.
Does the Eminent EM4050 Wireless Router support both 2.4GHz and 5GHz wireless frequencies?
Without specific information about the Eminent EM4050 model, I cannot confirm whether it supports dual-band frequencies. However, many modern routers support both 2.4GHz and 5GHz frequencies, which provide different advantages in terms of range and speed.
Can I connect a printer or external storage device to the Eminent EM4050 Wireless Router?
If the Eminent EM4050 model has USB ports, you may be able to connect a printer or external storage device to share resources across the network. Check the router's specifications or documentation for details on its USB capabilities.
How can I update the firmware on the Eminent EM4050 Wireless Router?
Firmware updates for the router can usually be performed through the router's administration interface. Check the manufacturer's website or the product documentation for instructions on how to download and install the latest firmware for the Eminent EM4050 model.
Does the Eminent EM4050 Wireless Router support Quality of Service (QoS) settings?
Without specific information about the Eminent EM4050 model, I cannot confirm whether it supports QoS settings. However, many routers provide QoS features that allow you to prioritize certain types of network traffic for better performance of specific applications.
Can I set up a guest network with the Eminent EM4050 Wireless Router?
If supported, the Eminent EM4050 Wireless Router should allow you to set up a guest network. This enables visitors to connect to a separate network that is isolated from your main network for added security and privacy.
How can I enhance the wireless coverage of the Eminent EM4050 Wireless Router?
To extend the wireless coverage range, you can consider using range extenders, additional access points, or mesh network systems. These devices can help boost the signal strength and expand the coverage of your wireless network.
Can I use the Eminent EM4050 Wireless Router with a VPN (Virtual Private Network)?
If the Eminent EM4050 model supports VPN pass-through or has built-in VPN capabilities, you should be able to use it with a VPN. Refer to the router's specifications or documentation for details on VPN compatibility.
Download This PDF Link:Eminent EM4050 54Mbps Wireless Router Specifications And Datasheet
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>