autotest Maxi Brake Meter Owner’s Manual

autotest Maxi Brake Meter

An efficient diagnostic and compliance tool, designed to test Service and Emergency brakes. Compliant with roadworthy regulations, and MOT approved.

UNIQUE FEATURES

• Measure’s pedal-force required to stop a vehicle
• Measure’s average and maximum deceleration
• Measure’s stopping distance and test speed
• Evaluates brake performance
• Prints an accurate test report
• Complies with International Standards
• Battery powered

4 Easy Testing Steps with AutoStop® Maxi

STEP 1: Secure the AutoStop® Maxi in the vehicle with its strap or optional floor-mounted magnet in a horizontal position with the lid open and facing forward. Attach the load cell to the brake pedal to test the service brakes.
STEP 2: Turn on the AutoStop® Maxi and enter examiner’s ID and the vehicle’s registration number. Start the test by accelerating the vehicle to the required speed.
STEP 3: Apply the brakes by pressing your foot on the load cell attached to the brake pedal, until the vehicle is stationary.
STEP 4: After the vehicle has come to a stop, the AutoStop® Maxi evaluates the brake performance, and displays and prints the test results.

AutoTest Products Pty Ltd
63 Parsons Street, Kensington, VIC 3031 Australia tel +613 8840 3000 sales@autotest.net.au

www.autotest.net.au

Features

• Calculates and displays average and maximum deceleration, distance to stop, test speed and pedal – force required to stop the vehicle

• Calculates and displays MFDD (Mean Fully Developed Deceleration) in accordance with ECE Reg 13

• Prints two original reports (one for the customer, the other for the examiner) as a permanent record of the test results, date, time, examiner’s ID number and the vehicle’s registration/VIN number

• Price Competitive

• Lightweight (3.0kg), compact
  (123 x 267 x 246mm) and portable

• Robust construction that is water resistant and petrol, chemical and acid proof

• Conventional (QWERTY) keypad lay-out, with tactile membrane cover

• LCD display

• Adjustable display control

• Both metric and imperial units of measurement

• Built-in integrity check

• Rechargeable, sealed, acid-gel battery, with low battery level indicator and automatic shut – down

• Calibration that is internationally traceable through NATA

• 24-month calibration interval

• 12-month warranty

• Low – cost spare parts, accessories, and consumables

• Comprehensive after-sales service and assistance

• Internet support hotline

• Position acquisition time – 1 Min Maximum

• Software configurable

Specifications

Input

• Load Cell: rated to less than ±1N, – 1000N
• Accelerometer: rated to less than±1% over 0-1.5g

Output

• Display: 16 – character LCD
• Built-in printer (Dot Matrix)

Analysis of Test results

• Average and maximum deceleration
• Test speed
• Stopping distance
• Time to stop
• Foot pedal force

Power Source
12V, 2.2AH, sealed – lead acid rechargeable battery

Printer

• Paper: maximum diameter: 48mm; width: 44.5mm (±0.5mm)
• Ribbon: Epson type ERC – 05
• Ribbon life: equivalent to 2 paper rolls
• Print speed: 1.0 line / sec

Standard Accessories

• Battery charger (Australia Only)
• Paper roll
• Printer ribbon
• Paper roll spindle
• Printer cover plate assembly
• Straps or optional floor – mounted magnet for case restraint
• User Manual

Optonal Features

• GPS or Glonass or Galileo positioning receiver, providing longitude and latitude
• USB and Bluetooth interface
• Stores over 100 test results with USB or Bluetooth
• Numerous user-entry ware and software options
• Graphical output

Also available in the Workshop Roadworthy Kit, including

• WorkshopPro 10
• Bluetooth Printer
• AutoLight Magnetic
• Headlight Align Headlight Aimer

AutoTest Products Pty Ltd
63 Parsons Street, Kensington, VIC 3031 Australia tel +613 8840 3000 sales@autotest.net.au
wwwwww.autotest.net.au

References

• Home - AutoTest Products Pty Ltd

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>