autotest License Activation for BrakePro Workshop Pro 10 User Guide
- June 9, 2024
- autotest
Table of Contents
autotest License Activation for BrakePro Workshop Pro 10
AutoTest BrakePro Product Information
AutoTest BrakePro is a software application that is designed to diagnose and test brake systems in vehicles. It comes with the purchase of Workshop Pro 10 and can be activated through the Workshop Manager app. The license activation process is necessary to access all the features of the BrakePro app.
Product Usage Instructions
- Open the Workshop Manager app. Wait for the loading screen to finish loading.
- Follow the instructions given on each screen. Once done, press the Next Button. Alternatively, swipe left until the Next Button becomes a Start Button. Once all the instructions have been completed, press the Start Button.
- The country, state, and the serial number for the tablet will be prefilled. Press the Submit Button.
- Enter the 4-digit code that was sent to the nominated email address entered in the previous step. If the email is not immediately delivered containing the 4-digit code, please call AutoTest for further instructions. Once done, press Submit Button. The Workshop Manager app will go to the Home Page.
- To verify the license details, go to Settings -> View Licenses. From there, the license expiration date will be shown for each AutoTest app. For now, the only license that will be shown is for the BrakePro app.
Once the license activation process is complete, you can use AutoTest BrakePro to diagnose and test brake systems in vehicles. Follow the on-screen instructions within the BrakePro app to perform brake system tests.
INSTRUCTION
Guide for First Time License Activation for AutoTest BrakePro
This guide is for activating license for AutoTest BrakePro that comes with the
purchase of Workshop Pro 10.
-
Open the Workshop Manager app. Wait for the loading screen to finish loading.
-
Make sure to follow the instructions given on each screen. Once done, press the Next Button. Alternatively, swipe left until the Next Button becomes a Start Button. Once all the instructions have been completed, press the Start Button.
-
Press the Check Connection Button. If all the instructions from the previous page have been followed, all the checks should pass. If not, redo the instructions from the previous page and try again. As part of the checks, the customer will be asked to confirm the serial number of the Workshop Pro 10 Tablet. If it is the correct serial number, press Yes and the customer will be issued a 12-month license as part of their purchase. Otherwise, call AutoTest for further instructions. Next, press the OK Button when prompted. After that, press the Start Button. Enter the following details:
-
First Name
-
Last Name
-
Company Name
-
Email Address
-
Mobile Number
-
Billing Address
-
City
-
Post Code
-
ABN
The country, state and the serial number for the tablet is prefilled. Once done, press the Submit Button.
-
Enter the 4-digit code that was sent to the nominated email address entered in the previous step. If the email is not immediately delivered containing the 4-digit code, please call AutoTest for further instructions. Once done, press Submit Button. The Workshop Manager app will go to the Home Page.
-
To verify the license details, go to Settings -> View Licenses. From there, the license expiration date will be shown for each AutoTest apps. For now, the only license that will be shown is for the BrakePro app.
