Bosch MUM58720 Food Processor Instruction Manual

May 21, 2024
Bosch

Bosch

Bosch MUM58720 Food Processor

Bosch-MUM58720-Food-Processor-Imgg

Intended use

  • This appliance is intended for domestic use only. Use the appliance  only for processing normal amounts of food and for normal amounts  of time for domestic use.
  •  Do not exceed permitted maximum  quantities (X “Application examples” see page 26).
  • The appliance is suitable for mixing, kneading , and beating food.
  • The appliance must not be used for processing other substances  or objects.
  •  Additional applications are possible if the accessories  approved by the manufacturer are used.
  • Only use the appliance  with approved genuine parts and accessories.
  •  Never use the  accessory parts for other appliances. Only use the appliance indoors at room temperature and up to  2000 m above sea level.

Important safety information

  • Read and follow the instruction manual carefully and keep it for later  reference! Enclose these instructions when you give this appliance  to someone else.
  •  If the instructions for the correct use of the appliance  are not observed, the manufacturer’s liability for any resulting  damage will be excluded.
  • This appliance can be used by persons with reduced physical, sensory, or mental capabilities or lack of experience and/or  knowledge if they have been given supervision or instruction  concerning the use of the appliance in a safe way and if they understand the hazards involved.
  •  Keep children away from the  appliance and connecting cable and do not allow them to use the  appliance.
  • Do not let children play with the appliance.
  •  Cleaning and  user maintenance must not be performed by children.

Risk of electric shock and fire!

  • The appliance may only be connected to a power supply with alternating current via a correctly installed socket with earthing. Ensure that the protective conductor system of the domestic supply has been correctly installed.
  • Connect and operate the appliance only by the specifications on the rating plate.
  • Do not use the appliance if the power cord and/or appliance are damaged. Only our customer service may repair the appliance, e.g. by replacing a damaged power cord, to avoid hazards.
  • Use only the rotary switch to switch the appliance on or off. Never connect the appliance to timer switches or remote­ controlable sockets. Never leave the appliance unattended while it is switched on!
  • Do not place the appliance on or near hot surfaces, e.g. hobs. The power cord must not come into contact with hot parts or be pulled across sharp edges.
  • Never immerse the base unit in water or place it in the dishwasher. Do not steam­clean the appliance. Do not use the  appliance with damp hands.
  • After each use, whenever the appliance is unsupervised, prior to assembly, before disassembly, before cleaning , and in the event of an error, the appliance must always be disconnected from the mains.

Risk of injury!

  • Before replacing accessories or additional parts that move during operation, the appliance must be switched off and dis­connected from the power supply. After switching off, the drive continues for a short time. Wait until the drive has come to
    a standstill.

  • Do not adjust the swivel arm while the appliance is switched on.

  • Only use tools when the bowl is inserted, the lid is fitted and the protective drive covers are in place! When using accessories, fit the bowl, lid , and drive covers according to the instructions!

  • While operating the appliance, never reach into the bowl or fill the shaft with your hands. Do not insert any objects (e.g. wooden spoon) into the bowl or filling shaft. Keep hands, hair, clothing, and other utensils away from rotating parts.

  • Never use tools and accessories or 2 accessories at the same time. When using the accessories, follow the individual operating instructions enclosed.

  • The accessory must be completely assembled before use. Never assemble the accessory on the base unit. The accessory should only be used in the intended operating position.

  • Do not grip the sharp blades or edges of the cutting discs. Take hold of cutting discs by the edge only.

  • Do not touch blender blades with bare hands.

  • Never reach into the attached blender! Never use the blender without the lid in place.

  • Care shall be taken when handling the sharp cutting blades, emptying the container , and during cleaning.

Risk of scalding!
If processing hot liquids, steam escapes through the funnel in the lid.  Add a max. 0.5 liters of hot or frothing liquid.

Risk of suffocation!
Do not allow children to play with packaging material.

Caution!
We recommend that the appliance is never switched on for longer  than is necessary to process the ingredients. Do not operate  at no­load.

Important
It is essential to clean the appliance thoroughly after each use or  after it has not been used for an extended period (X “Cleaning and servicing” see page 24).

Explanation of the symbols on the appliance or accessory

Follow the instructions in the operating instructions.

  • Caution! Rotating blades.
  • Caution! Do not   place rotating finger   tools. in the feed tube.
  • Congratulations on the purchase of your new Bosch appliance. You can find further information about our products on our web page.
Safety systems

Start lock-out
See the “Operating Positions” table. The appliance can be switched on in  pos. 1 and 3 only:

  • when the bowl (11) has been inserted and turned until it locks into place.

Restart lock-out
If the power is interrupted, the appliance  remains switched on but the motor does  not start running again when the power  is restored. To switch the appliance on  again, turn the rotary switch to P, then  switch it on.

Overload protection
If the motor switches itself off while the  appliance is being used, the overload pro­tection feature has been activated. A possi­ble cause may be that too much food was  processed at one time. If a safety system is activated, see

“Troubleshooting”.
The appliance requires no maintenance.

Overview

Please fold out the illustrated pages. Fig. A:

Base unit

  1. Release button

  2. Swivel arm

    • “Easy Armlift”  function to support the  upward movement of the arm (see  “Work positions”).
  3. Rotary switch

    • When the appliance has been switched  off (position P), the appliance runs  automatically to the optimum position for  changing the tools.
    • MUM52..:
    • P = Stop
    • M = Instantaneous switching at  maximum speed, hold the switch for  the required blending duration.
    • Settings 1-4, Operating speed:
    • 1 = low speed – slow,
    • 4 = high speed – fast.
    • MUM54../MUM55../MUM56../MUM58..: P = Stop
    • M = Instantaneous switching at  maximum speed, hold the switch for  the required blending duration.
    • Settings 1-7, Operating speed:
    • 1 = low speed – slow,
    • 7 = high speed – fast.
  4. On/Off display
    (MUM54../55../56../58..)
    Is lit while the appliance is operating  (rotary switch on M or 1-7). Flashes if the appliance has been operated  incorrectly, the electronic fuse has tripped or the appliance is defective –  see section “Troubleshooting”.

  5. Drive cover
    To remove the drive cover, press on the  rear area and remove the cover.

  6. Drive for
    – Continuous-feed shredder and
    – Citrus press (optional accessory*) When not in use, attach the drive cover.

  7. Drive for tools  (stirrer, whisk, kneading hook) and mincer (optional accessory*)

  8. Blender drive cover

  9. Drive for blender (optional accessory*) M When not in use, attach the blender  drive cover. \

  10. Cord store

    • MUM52../MUM54../MUM58..:
      Stow the cord in the cord store

    • MUM55../MUM56..:
      Automatic cord winder

    • Bowl with accessories

  11. Stainless steel stirring bowl

  12. Lid
    Tools

  13. Stirrer

  14. Whisk

  15. Kneading hook with dough deflector

  16. Accessories bag

    • For storage of the tools and cutting  discs.
    • Continuous-feed shredder
  17. Pusher

  18. Cover with filling shaft

  19. Cutting discs

    • Reversible slicing disc – thick / thin
    • Reversible shredding disc –
    • coarse / fine
    • c Grating disc – medium­fine
  20. Disc holder

  21. Housing with an outlet opening
    **Blender***

  22. Blender jug

  23. Lid

  24. Funnel

    • If an accessory is not included in the product package, it can be purchased via  trade or customer service.

Operating positions

Fig. B:

Attention! Before operating the appliance, attach the  tool / accessory to the correct drive and  in the correct position and place in the  operating position according to this table.  The swivel arm must be engaged in every operating position.

Note The swivel arm features an  “Easy Armlift” function which supports the upwards move­ment of the swivel arm.

Selecting the operating position

  • Press the Release button and move the swivel arm. Support movement with your hand.
  • Move the swivel arm until it engages in the required position.

Bosch-MUM58720-Food-Processor-Fig-2

Insert / remove the whisk, stirrer , or kneading hook. Add large quantities of ingredients.

Operation

Risk of injury! Do not insert the mains plug until all prepa­rations for working with the appliance are  complete.

Attention Do not operate the appliance without an  accessory/tool in the operating position. Do  not operate the appliance empty. Do not  expose appliances or accessories to heat  sources. Parts are not microwave­safe.

  • Before operating the appliance and accessories for the first time, clean thor­oughly; see “Cleaning and servicing”.

Important information

  • In these instructions for use, the recom­mended reference values for the operating  speed refer to appliances with a 7­setting  rotary switch.
  • For appliances with a  4­setting rotary switch,  you can find the values in brackets after the values for a 7 ­setting rotary switch.
  • These operating instructions contain a sticker with reference values for the operat­ing speed of the appliance when using the tools or accessories. We recommend attach­ing this sticker to the appliance (Fig. C).

Preparation

  • Place the base unit on a smooth, clean surface.
  • Pull out the power cord (Fig. D). MUM52../MUM54../MUM58..
  • Cord store: Pull out the cable to the required length.
  • MUM55../MUM56.. Automatic cord winder: Pull out the cord in one go to the required length (max. 100 cm) and slowly release; the cord is locked.

Reducing the cord length

Pull gently on the cord and allow it to roll up to the required length. Then gently pull the cord again and slowly release it; the cable is locked.

Warning

Do not twist the cord when inserting it. If  the appliance features an automatic cord  winder, do not insert the cord manually. If  the cord jams, pull out the cord all the way  and then allow it to wind up.

  • Insert the mains plug.

Bowl and tools

Risk of injury from the rotating tools

While the appliance is operating, never  place your fingers in the mixing bowl. Attach the  cover (12) before operating the appliance!

Do not change tools until the drive has  come to a standstill – when the appliance  is switched off, the drive continues running  briefly and stops in the tool change position.  Do not move the swivel arm until the tool  has come to a standstill.  Always secure unused drives with protective  drive covers.

Attention
Use a bowl with this appliance only.

Stirrer (13) for stirring dough, e.g. cake mixture

Whisk (14) for whisking egg whites, cream , and  light dough, e.g. sponge mixture

Kneading hook (15) for kneading heavy dough and  mixing in ingredients that ought not to  be cut (e.g. raisins and chocolate  chips)

Working with the bowl and the tools

Fig. E: Press the Release button and move the swivel arm to position 2.

Insert the bowl: Tilt the bowl forwards and then set it down. Turn anti­clockwise until it locks into place.

Depending on the processing task, insert the stirrer, whisk , or kneading hook until it locks into position.

Note: If using the kneading hook, rotate the dough  deflector until the kneading hook can lock  into position (Fig. E-4b).

  • Put the ingredients to be processed into the bowl.

  • Press the Release button and move the swivel arm to position 1.

  • Attach the cover.

  • Set the rotary switch to the desired setting.

Our recommendation

  • Stirrer : first stir in at setting 1 (1), then select setting 7 (4)
  • Whisk : setting 7 (4), mix in at setting 1 (1)
  • Kneading hook: first stir in at setting 1 (1), knead at setting 3 (2)

Adding more ingredients

  • Switch off the appliance with the rotary switch.
  • Add more ingredients through the feed tube on the cover.

or

  • Remove lid.

  • Press the Release button and move the swivel arm to position 2.

  • Add ingredients.

After using the appliance

  • Switch off the appliance with the rotary switch.
  • Remove the mains plug.
  • Remove lid.
  • Press the Release button and move the swivel arm to position 2.
  • Take the tool out of the drive.
  • Remove the bowl.
  • Clean all parts, see “Cleaning  and servicing”.

Continuous-feed shredder

Risk of injury: Do not grip the sharp blades or edges of the  cutting discs. Take hold of cutting discs by  the edge only. Before attaching / removing  the continuous-feed shredder, wait until the  drive has come to a standstill and pull out  the mains plug. Do not reach into the feed  tube.

Warning!
The continuous­feed shredder must be  completely assembled before use. Never assemble the continuous­feed shredder on  the base unit. Operate the continuous­feed  shredder in the indicated operating position  only.

Predetermined breaking point

Fig. F: The built­in predetermined breaking point  protects the drive of the appliance. If an  overload occurs, the drive shaft of the con­tinuous­feed shredder breaks. However, the  drive shaft can easily be replaced. A new  disc holder with a drive shaft is available from  customer service.

Reversible slicing disc – thick/thin

for slicing fruit and vegetables. The process at setting 5 (3). Designation on the reversible slicing disc:  “1”  for the thick slicing side “3”  for the thin slicing side

Warning!
The reversible slicing disc is not suitable for  slicing hard cheese, bread, rolls , or choco­late. Slice-boiled, waxy potatoes only when  they are cold.

Reversible shredding disc –coarse/fine

for shredding vegetables, fruit , and cheese,  except for hard cheese (e.g. Parmesan). Processing at setting 3 (2) or 4 (3). Designation of the reversible shredding  disc:

  • “2” for the coarse shredding side
  • “4” for the fine shredding

Warning!
The reversible shredding disc is not suitable  for shredding nuts. Shred soft cheese with  the coarse side only at setting 7 (4).

Grating disc – medium-fine

for grating raw potatoes, hard cheese (e.g. Parmesan), cooled chocolate  , and nuts. The process at setting 7 (4).

Warning!
The grating disc is not suitable for grating  soft cheese and cheese slices.

Working with the continuous-feed shredder
Fig. G:

  • Press the Release button and move the swivel arm to position 2.

  • Insert the bowl:
    Tilt the bowl forwards and then set it down. Turn anti­clockwise until it locks into place.

  • Press the Release button and move the swivel arm to position 3.

  • Remove the drive cover from the drive of the continuous­feed shredder (Fig. G-5a).

  • Hold the disc holder at the lower end, ensur­ing that the two tips are face up.

  • Carefully place the required slicing or shredding disc onto the tips of the disc holder (Fig. G-6a). In the case of reversible discs, ensure that the required side is face up.

  • Grip the disc holder at the upper end and insert it into the housing (Fig. G-6b).

  • Attach the cover (note mark) and turn all the way in a clockwise direction.

  • Place the continuous­feed shredder on the drive and rotate all the way in a clockwise direction, as illustrated in Fig. G-8.

  • Turn the rotary switch to the recommended setting.

  • Put the food to be processed in the feed tube and push it down with the pusher.

Warning!
Prevent the cut ingredients from building up  in the outlet opening.

Tip
 To ensure even cutting results, process  thin ingredients in bunches.

Note
 If the food to be processed sticks in  the continuous­feed shredder, switch the food  processor off, pull out the mains plug, wait until  the drive comes to a standstill, remove  the cover from the continuous­feed shredder  , and empty the feed tube.

After using the appliance

  • Switch off the appliance with the rotary switch.
  • Rotate the continuous­feed shredder in an anti­clockwise direction and remove.
  • Rotate the lid in an anti­clockwise direc­tion and remove.
  • Remove the disc holder with the disc. To do this, press finger from below against the drive shaft (Fig. H).
  • Clean parts.

Blender

Risk of injury from sharp blades / rotating drive!
Never place your fingers in the attached blender!  Do not remove / attach the blender until the  drive is at a standstill! Operate the assem­bled blender only and with the lid attached.

Risk of scalding!
If processing hot liquids, steam escapes  through the funnel in the lid. Add a max. 0,5 liters of hot or frothing liquid.

Warning!
Blender may be damaged. Do not process  deep­frozen ingredients (except ice cubes).  Do not operate the blender when empty.

Working with the blender
Fig. J:

  • Press the release button and move the swivel arm to position 4.

  • Remove the blender drive cover.

  • Attach the blender jug (mark on the handle on the mark on the base unit) and turn all the way in an anti­clockwise direction.

  • Add ingredients.

    • Maximum amount of liquid = 1.25 litres; maximum amount of frothing or hot liquids = 0.5 litres;
    • Optimal processing capacity – solids = 50­100 g;
  • Attach the cover and turn anti­clockwise all the way into the blender handle. The cover must be locked in position.

  • Set the rotary switch to the desired setting.

Adding more ingredients Fig. J-8:

  • Switch off the appliance with the rotary switch.
  • Remove the lid and add ingredients or
  • remove the funnel and gradually add solid ingredients through the refill opening
  • pour liquid ingredients through the funnel.

After using the appliance

  • Switch off the appliance with the rotary switch.
  • Rotate the blender in a clockwise direc­tion and remove.

Tip
It is recommended to clean the blender  immediately after use.

Cleaning and servicing

Attention!
Do not use abrasive cleaning agents. Sur­faces may be damaged.

Cleaning the base unit

The danger of electric shock!
Never immerse the base unit in water or  place it under running water. Do not use a  steam cleaner.

  • Remove the mains plug.
  • Wipe the base unit and drive cover with a damp cloth. If required, use a little detergent.
  • Then dry the base unit.

Cleaning the bowl and tools
The bowl and tools are dishwasher­proof.  Do not wedge plastic parts in the dish­washer, as they could be permanently  deformed during the washing process!

Cleaning the continuous-feed shredder
All parts of the continuous­feed shredder  are dishwasher­proof.

Tip
To remove the red film after processing  e.g. carrots, pour a little cooking oil on a cloth and rub the film off the continu­ous­feed shredder (not the cutting discs). Then rinse the continuous­feed shredder.

Cleaning the blender

A Risk of injury from sharp blades!

Do not touch blender blades with bare  hands. The blender jug, lid , and funnel are  dishwasher­proof.

Tip
After processing liquids, it is often suffi­cient to clean the blender without removing  it from the appliance. Pour a little water and  washing­up liquid into the attached blender.  Switch on the blender for several seconds (setting M). Pour out the water and rinse out  the blender with clear water.

Important information
If required, clean the accessories bag. Follow  the care instructions in the bag.

Storage

Risk of injury!
When the appliance is not in use, pull out  the mains plug.

Fig. K:

  • Store tools and cutting discs in the acces­sories bag.
  • Keep the accessories bag in the bowl.
  • To store in the original packaging, see  Fig. L.

Troubleshooting

Risk of injury!
Before eliminating a fault, pull out the mains  plug.

Important information for MUM54../MUM55../MUM56../MUM58..

The Operating indicator flashes if the appli­ance has been operated incorrectly or the  electronic fuse has tripped or the appliance  is defective. The swivel arm must be engaged in every operating position. Initially try to eliminate the problem which  has occurred with the help of the following  information.

Fault
The appliance does not start.

Remedial action

  • Check the power supply.
  • Check the mains plug.
  • Check the swivel arm. Correct position?Engaged?
  • Screw on the blender or bowl as far as possible.
  • Attach the blender cover and screw it on as far as possible.
  • Attach drive cover to unused drives.
  • The safety lock is activated. Switch the appliance to P and then back to the required setting.

Fault
The appliance switches off during use. The  overload protection feature has been  activated. Too much food was processed at  one time.

Remedial action

  • Switch off the appliance.
  • Reduce processing quantity.
  • Do not exceed permitted maximum quan­tities (see “Application examples”).

Fault
While the drive was running, the release  button was inadvertently pressed. The  swivel arm moves up. The drive switches  off but does not stop in the tool change  position.

Remedial action

  • Set the rotary switch to P.
  • Move the swivel arm to position 1.
  • Switch on the appliance (setting 1).
  • Switch off the appliance again.

The tool stops in the tool change position.

Fault
Blender does not start working or stops  during use, the drive is “humming”. The blade is  blocked.

Remedial action

  • Switch off the appliance and pull out the main plug.
  • Detach the blender and remove the obstruction.
  • Re­attach the blender.
  • Switch on the appliance.

Important information
If the fault cannot be eliminated, please  contact customer service.

Application examples

Whipped cream – 100 g­600 g

  • Whip cream with the whisk for 1½ to 4 minutes at setting 7 (4) depending on the quantity and properties of the cream.

Egg white
– 1 to 8 egg whites

  • Beat egg white with the whisk for 4 to 6 minutes at setting 7 (4).

Sponge mixture
Basic recipe

  • 2 eggs
  • 2­3 tbs. hot water
  • 100 g sugar
  • 1 packet of vanilla sugar
  • 70 g flour
  • 70 g cornflour
  • Baking powder if required
  1. Beat the ingredients (except flour and cornflour) with the whisk for approx. 4­ 6 minutes at setting 7 (4) until frothy.
  2. Rotate switch to setting 1 (1) and spoon in the sifted flour and cornflour within approx. ½ to 1 minute.

Maximum quantity : 2 x basic recipe

Cake mixture
Basic recipe

  • 6 eggs
  • 500 g sugar
  • 1 pinch of salt
  • 2 packets of vanilla sugar or peel from ½ lemon
  • 500 g butter or margarine
  • (room temperature)
  • 1000 g flour
  • 1 packet of baking powder
  • 250 ml milk
  1. Mix the eggs, sugar, salt and vanilla sugar or lemon peel with the stirrer for approx. 10 seconds at setting 1 (1).
  2. Set to setting 5 (3) and process for approx. 120 seconds.
  3. Add butter and process for approx. 60 seconds at setting 3 (2).
  4. Add flour and baking powder and process for approx. 2 minutes at setting 1 (1).
  5. Set to setting 3 (2) and gradually add the milk within 2 minutes.

Maximum quantity : 1 x basic recipe

Short pastry
Basic recipe

  • 125 g butter (room temperature)
  • 100­125 g sugar
  • 1 egg
  • 1 pinch of salt
  • A little lemon peel or vanilla sugar
  • 250 g flour
  • Baking powder if required
  1. Using the stirrer, process all ingredients for approx. ½ minute at setting 1 (1), then for approx. 2­3 minutes at setting 6 (3).
    From 500 g flour:

  2. Knead the ingredients with the kneading hook for approx. ½ minute at setting 1 (1), then for approx. 3­4 minutes at setting 3 (2).

Maximum quantity
 2 x basic recipe

Yeast dough

Basic recipe

  • 500 g flour
  • 1 egg
  • 80 g fat (room temperature)
  • 80 g sugar
  • 200­250 ml lukewarm milk
  • 25 g fresh yeast or 1 packet of dried yeast
  • Peel of ½ lemon
  • 1 pinch of salt
  1. Process all ingredients for approx. ½ minute at setting 1, then for approx. 3­ 6 minutes at setting 3 (2) using the kneading hook.

Maximum quantity:  2 x basic recipe

Pasta dough
Basic recipe

  • 300 g flour
  • 3 eggs
  • 1­2 tbs. (10­20 g) cold water as required
  1. Process all ingredients for approx. 3­ 5 minutes at setting 3 (2) until a dough forms.

Maximum quantity:  1,5 x basic recipe

Bread dough
Basic recipe

  • 1000 g flour
  • 3 packets of dry yeast
  • 2 tsp. salt
  • 660 ml warm water

Process all ingredients for approx. ½ minute at setting 1, then for approx. 4­ 5 minutes at setting 3 (2) using the kneading hook.

Mayonnaise

  • 2 eggs
  • 2 tsp. mustard
  • ¼ l oil
  • 2 tbs. lemon juice or vinegar
  • 1 pinch of salt
  • 1 pinch of sugar

Ingredients must be at the same temperature.

  1. Process the ingredients (except the oil) in the blender for several seconds at setting 3 (2) or 4 (3).
  2. Switch the blender to setting 7 (4) and slowly pour the oil through the funnel and mix until the mayonnaise emulsifies.

Eat the mayonnaise immediately, do not store it.

Disposal
Dispose of packaging in an environ­mentally­friendly manner. This appliance is labeled in accordance  with European Directive 2012/19/EU concerning used electrical and   electronic appliances (waste electrical  and electronic equipment – WEEE).  The guideline determines the frame­work for the return and recycling  of used appliances as applicable  throughout the EU. Please ask your  specialist retailer about current   disposal facilities.

Guarantee
The guarantee conditions for this appliance  are as defined by our representative in the  country in which it is sold. Details regarding  these conditions can be obtained from  the dealer from whom the appliance was purchased. The bill of sale or receipt must  be produced when making any claim under  the terms of this guarantee. Changes reserved.

Optional accessories

Bosch-MUM58720-Food-Processor-fig-17

If an accessory is not included in the product package, it can be purchased via the trade or  from customer service.

Frequently Asked Questions

What are the main features of the Bosch MUM58720?

The Bosch MUM58720 is a versatile food processor that offers multiple functions, including mixing, kneading, slicing, grating, shredding, chopping, blending, and juicing. It comes with a powerful 1000-watt motor, a large 3.9-quart mixing bowl, and a wide range of attachments for different food preparation tasks.

What attachments are included with the Bosch MUM58720?

The Bosch MUM58720 comes with a comprehensive set of attachments, including a dough hook, a beating whisk, a stirring whisk, a continuous shredder, a reversible slicing disc, a grating disc, a citrus press, and a blender jug with a lid.

How many speed settings does the Bosch MUM58720 have?

The food processor offers seven-speed settings, allowing you to adjust the speed according to your specific needs. Additionally, it has a pulse function for short bursts of power.

Is the Bosch MUM58720 easy to clean?

Yes, the Bosch MUM58720 is designed for easy cleaning. The mixing bowl, attachments, and blender jug are dishwasher safe, making cleanup a breeze. However, it's always recommended to consult the user manual for specific cleaning instructions.

Does the Bosch MUM58720 have a safety feature?

Yes, the food processor has a safety feature that ensures the motor doesn't start unless the bowl and all attachments are properly assembled and locked into place. This prevents accidental operation and ensures your safety while using the appliance.

Can the Bosch MUM58720 handle large quantities of ingredients?

Yes, the 3.9-quart mixing bowl of the Bosch MUM58720 is spacious enough to handle large quantities of ingredients. Whether you're preparing dough, chopping vegetables, or blending ingredients, this food processor can accommodate most recipes.

Does the Bosch MUM58720 come with a warranty?

Warranty terms may vary depending on your location and the retailer from which you purchase the appliance. It's recommended to check the warranty information provided by the seller or contact Bosch directly for detailed warranty coverage.

What are the functions of a food processor?

Your food processor can tackle the tough and rigorous work of shredding, kneading, dicing and grinding, but it can also blend a combination of ingredients into homogeneous mixtures in a similar fashion as a blender. Food processors often depend on a multipurpose blade set to a high speed to get the job done.

Does Bosch have a food processor?

The Food Processor attachment gives you added versatility to chop, mince, and slice fresh ingredients with ease.

How good is Bosch food processor?

The Bosch MultiTalent 8 Food Processor is a capable and high quality food processor, but it also acts as a blender, shredder, and even a mini-chopper. For the price, kitchen tools don't get much more versatile.

Reference:Bosch MUM58720 Food Processor Instruction Manual- device.report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals