TOURATECH 01-048-5555-0 Pannier Rack Instruction Manual
- October 30, 2023
- Touratech
Table of Contents
01-048-5555-0 Pannier Rack
Instruction Manual
01-048-5555-0 Pannier Rack
We recommend having the accessory parts fitted by a specialist workshop.
| Caution
---|---
| Note
| Warning
| Liquid
| Liquid
| Template
| 2 Persons
| Original motorcycle part
Steel 8.8| Inox A2
M 4| 2,7| 0,8| Nm
M 5| 5,5| 1,7| Nm
M 6| 9,7| 3,0| Nm
M 8| 23,0| 7,9| Nm
M10| 47,0| 14,0| Nm
M12| 80,0| 24,0| Nm
M14| 130,0| -,-| Nm
M16| 196,0| 59,0| Nm
M18| 270,0| -,-| Nm
M20| 385,0| 114,0| Nm
These instructions are written based on our current state of knowledge.
Information is provided without any guarantee as to its accuracy. Subject to
technical modifications
The order of assembly steps must be followed
Tourettic accepts no liability for incorrectly fitted parts and resulting
material damage or personal injury!
Please observe applicable road vehicle (construction and use) regulations as
well as EC/ECE Directives and applicable laws in your country. If parts are
fitted which require inspection and/or approval after fitting, take your
vehicle to a testing station immediately and have the vehicle papers updated
Check and if necessary tighten all bolted connections after S0 km Standard
tightening torques in Nm for bolted connections with strength class 8.8.
For special tightening torques refer to your specialist workshop!
Please take into account that fitting panniers, crash bars, foot peg lowering
kits (rider and pillion),Kickstand enlargmentplate, front spoilers and engine
guards may restrict the bike’s lean angle!
If modifications are made to the fairing, stem, handlebar, fairing parts, etc.
ensure that electrical wiring, brake lines, accelerator and clutch cables are
refitted correctly. Check
clearance, both sides with full steering lock.
Always disconnect the battery when working on the electrics!
We recommend cutting protective flm to size and applying it to impact areas
that are likely to be chipped by stones.
Work on the brake system and suspension should always be carried out by a
specialist workshop.
The maximum load on luggage racks is 5kg! Luggage racks ZegaPr TC is 10 kg!
off other original accessories or aftermarket accessories are used, ensure
clearance, fitment and do not come into contact with other parts! Apply
conventional lubricant to stainless steel bolts prior to assembly. porting
instructions also can be downloaded from the Tourettic webs hop
Mounting instructions
| 01-048-5555-0 | 01-048-6082-0 |
|---|---|
| 01-048-5730-0 | 01-051-2230-0 |
| 01-048-5731-0 | 01-052-2000-0 |
| 01-048-5732-0 | 01-052-2001-0 |
| 01-048-6030-0 | 01-052-2004-0 |
| 01-048-6031-0 | 01-052-3101-0 |
| 01-048-6032-0 | 01-052-3102-0 |
| 01-048-6080-0 | 01-052-3103-0 |
| 01-048-6081-0 |
Coffer system
01-050-3010/3011/3012/3020/302 1/3022/3030/3031/3032-0
Aluminium Coffer ZEGA Pro 2
Positioning of top blocks
Pannier rack stainless steel for BMW F80GS / F650GS(Twin) / F700GS
Case| left| right
Position| OA&SB| 1C& 94
@February 2022 by:
Tourettic GmbH, Germany
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>