CURT 51312 Brake Control Harness Instruction Manual
- June 4, 2024
- Curt
Table of Contents
CURT 51312 Brake Control Harness
INSTALLATION INSTRUCTIONS
51312 & 51313 APPLICATIONS
Make Model
Ford Bronco
Ford F-Series
BRAKE CONTROL HARNESS
LOCATION GUIDE
Representative vehicle shown below
BH1 – Under dash, left of steering column, near emergency brake pedal
INSTALLATION /
SAFETY INSTRUCTIONS
- Step 1
Locate the 4-pin, vehicle brake control harness connector under the dash, to the left of the steering column. It will be taped to another harness near the emergency brake pedal. The connector will be similar to that on the CURT brake control harness
- Step 2
Insert the connector on the CURT brake control harness into the vehicle connector. Make sure the connector is fully inserted with locking tabs in place.
- Step 3
Insert the brake control harness’s black connector into the brake control’s quick plug connector. Secure the brake control harness with the provided cable ties, avoiding any pinch points.
- Step 4
Complete the installation using the brake control instructions. Mount the unit as directed and perform test procedures as instructed in the brake control user manual.