CURT 51362 Brake Control Harness Instruction Manual
- June 4, 2024
- Curt
Table of Contents
CURT 51362 Brake Control Harness
INSTALLATION INSTRUCTIONS
51362 & 51363 APPLICATIONS
- Make Model
- Lexus GX 460
- Lexus GX 470
- Lexus LX 470
- Lexus LX 570
- Lexus LX 570
NOTICE All steps must be followed to ensure the CURT brake control harness will function properly. Once installed, test for proper function by following the brake control unit instruction manual.
INSTALLATION / SAFETY INSTRUCTIONS
-
Step 1
Locate the 5-pin, vehicle brake control harness connector under the dash, to the left of the steering column. It will be taped to another harness near the emergency brake pedal. The connector will be similar to that on the CURT brake control harness. -
Step 2
Insert the connector on the CURT brake control harness into the vehicle connector. Make sure the connector is fully inserted with locking tabs in place. -
Step 3
Insert the brake control harness’s black connector into the brake control’s quick plug connector. Secure the brake control harness with the provided cable ties, avoiding any pinch points. -
Step 4
Complete the installation using the brake control instructions. Mount the unit as directed and perform test procedures as instructed in the brake control user manual.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>