GaZeR TV40-FS3 High Performance Smart TV User Guide

: October 30, 2023
: GaZeR

TV40-FS3 High-Performance Smart TV

Product Information

The product is a digital device that provides various functions to the user. It has a display screen for viewing information and buttons for controlling the device. The device has multiple input and output ports for connecting to other devices. It is powered by an internal battery or an external power source. The device supports various file formats and can be used for various purposes such as storing data, playing media, and connecting to the internet.

Product Usage Instructions

Charge the device using the provided charger or connect it to an external power source.
Press the power button to turn on the device.
Use the buttons and the display screen to navigate through the device’s functions.
Connect the device to other devices using the input and output ports.
Transfer files to and from the device using a computer or other compatible device.
Use the device for its various functions such as storing data, playing media, and connecting to the internet.
Refer to the user manual for more detailed instructions on specific functions and features of the device.

SAFETY WARNING AND NOTICE
Thanks for choosing the high-performance and multifunctional intelligent Gazer TV produced by our company. This precious thing will bring you better audiovisual enjoyment.
The design of this product has given consideration
to factors affecting personal safety. However, improper operation may result in electric shock and fire disaster. To ensure safety, prolong the service life of this product, and make sure the best performance of this prod-
uct can be given full play to, please read the manual and marking label carefully before using it and comply with the following safety instructions.
Please keep the user manual for later use.

Warning: May result in casualties

Attention: May results in personal injury or property losses

UNDER FOLLOWING CONDITIONS

Power failure or unstable voltage.
Abnormal sound or smell from the device.
AC power cord is damaged.
TV set is damaged due to falling off, knock or impact.
Any liquid or foreign matters enter into the TV set. Turn off the TV set immediately, unplug the power cord from the power outlet, and contact authorized maintenance personnel.
If coal gas or other flammable gases leak, do not unplug the power cord of the TV set or other electric appliances; instead, close the valve of the gas immediately and open the doors and windows.

Warning

Only use 100-240 VAC, 50/60 Hz power supply. All cables can be connected or pull out only after power supply is turned off.
Do not fix the TV set on instable position, or else it may cause falling off, damage, or even fire.
Do not put the TV set in the environment:
- With direct sunshine, moisture, overheating, undercooling or heavy dust;
- With flammable or explosive substance;
- With flammable or corrosive gas;
- In bathroom, kitchen, etc.
Do not use damaged or improper power socket, and ensure that the plug and socket are connected properly.
Keep the power plug and socket free of dust and metal pieces.
Attention
Do not let children climb onto the TV set.
Keep the small accessories away from children’s reach to avoid swallowing.
If the TV set won’t be used for a long time, please turn off the device and unplug the power cord.
Before cleaning the TV set, unplug the power cord and wipe with soft cloth; do not use chemical reagents and avoid foreign substances entering into the device. The incorrect cleaning (such as cleaning fluid, water, etc) may lead to damage of product’s appearance, erasing products printing information, even flow into the machine and damage components, cause machine can not display.
To adjust the position or angle of the TV set, please disconnect all wires and move slowly to avoid falling off.
Do not rub with hard object, knock at, bend or squeeze the screen
Do not use machine immediately after transfering machine to the places with high temperature from low temperature, which will cause fogging inside machine and failures.
If the screen is broken and the liquid splashes on skin, please wash with clean water immediately for 15 minutes, and go to see your doctor. To carry the TV set with hands, please grasp the corners and hold the bottom; do not apply force on the panel.
Displaying the same image for a long time or active image with fixed words, icons will leave “image persistence” on screen which will not disappear after powering off for a long time. This undesirable phenomenon is not covered by warranty.
Healthy TV watching:
- Watch in appropriate light; poor light or long time watching may hurt your eyes.
- Adjust the volume appropriate to avoid hurting your hearing.
Unplug the power cord of the device to cut off the power supply.
If a power plug or appliance coupler is used as disconnecting device, it should ensure easy operation.
Power plug shall be connected reliably. Loose power plugs may cause sparkle and fire.
All the technical specifications in the user’s manual and on the packaging are subject to changes without prior notice. If there is slight deviation between the user’s manual and actual operation, the latter shall prevail.

Warning

Do not damage the power cord:
- It is prohibited to refit the power cord;
- Do not put heavy object on the power cord;
- Keep the power cord away from heat source;
- Do not drag the power cord when unplugging.
Do not connect too many appliances to one power strip, or else it may cause fire due to high power consumption.
Do not let open flame (e.g. lit candle) approach the TV set, or else it may cause electric shock or fire.
Do not put the container filled with water on the TV set, to avoid electric shock or fire caused by water drop of splashing.
Do not penetrate any sharp object, metal or liquid into the signal connector or air vents, to avoid short circuit and product damage as well as electric shock.
The slots on the case is designed to release heat so as to assure that all inside components will not reach an extra high temperature and can work normally for a long time. Please do not cover the holes while place it.
Warning
Do not touch the plug with wet hands, or else it may cause electric shock.
Do not turn on the TV set in thunderstorm weather; instead, unplug the power plug and antenna connector to avoid lightning strike.
Do not disassemble the TV set by yourself, or else it may cause electric shock or fire. Contact qualified personnel for maintenance.

Google, Google Play, YouTube, Android TV and other marks are trademarks of Google LLC.
Google Assistant is not available in certain languages and countries.Availability of services varies by country and language.
HIGH-DEFINITION MULTIMEDIA INTERFACE
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade Dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

[ MOUNTING AND CONNECTING

PACKING LIST

The TV set.
User Manual.
Remote control.
Power cord (or attached to TV set).
AV transfer cable (option).

MOUNTING THE TV SET TIPS ON INSTALLATION

The TV set should be mounted near the AC power socket for easy plugging and unplugging.
For your safety, please select appropriate wall mount bracket or base.
To avoid hurt, it is required to place the TV set on stable plane, or fix on firm wall.
Ask qualified personnel to mount the TV set on the wall. Improper mounting may result in instable TV set.
Do not place the TV set at any place susceptible to mechanical vibration.
Do not place the TV set at any place that insects may enter.
Do not mount the TV set against air conditioner, or else the internal panel of the display may condense moisture and cause failure.
Do not place the TV set at any place with strong magnetic field, or else it may be interfered with and damaged by electromagnetic wave.

Warning

Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

Using cabinets or stands recommended by the manufacturer of the television set.
Only using furniture that can safely support the television set.
Ensuring the television set is not overhanging the edge of the supporting furniture.
Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.
Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture.
Educating children about the dangers of climbing on furniture to reach the television set or its controls.
If your existing television set is being retained and relocated, the same considerations as above should be applied.

Ventilation

Please keep this space at least around the TV, as shown in the figure.
Do not cover the air vents or insert any object into the enclosure.
Do not put the device in limited space, e.g. bookcase or embedded closet, unless the TV set is properly ventilated.

CONNECTING PERIPHERAL EQUIPMENT

Remark:

USB interfaces support peripheral equipment, including USB mass storage device, USB mouse, keyboard, etc.
When you need to connect the device which support the ARC function, please select the HDMI interface.
HDMI connector can realize DVI connector function with external HDMI/DVI commutator.
The peripheral equipment and cables described in this manual should be purchased separately.

Warning

When connecting outdoor antenna to signal port of the TV set, please turn off the TV set first. Do not approach the outdoor antenna to high voltage mains power line to avoid electric shock. The wired network antenna connected to this TV set must be isolated from the protective grounding, or else it will cause fire or other hazards.

REMOTE CONTROL

METHOD FOR INSTALLATION OF REMOTE CONTROL BATTERY
Remove the battery compartment cover and insert two AAA batteries; make sure the polarity of the batter- ies is in compliance with the polarity mark”+” and”-” in the battery compartment of the remote control. PRECAUTIONS FOR USING THE REMOTE CONTROL

The remote control should be pointed at the remote control sensor during operation. An object placed between the remote control and the remote control sensor may impede normal operation.
The remote control should be prevented from strenuous vibration. Besides, please do not set or place the remote control under direct sunshine, as heating power may result in deformation of the remote control.
Remote control failure may occur when the remote control sensor of the main unit is under direct sunshine or strong lighting; in this case, please change the angle of lighting or this TV set, or operate the remote control near the remote control sensor.
Low battery will influence the remote control distance, in which case, the battery should be replaced with a new one. If the remote control is going to be idle for a long time or the battery runs out, please take the battery out to prevent the remote control from being corroded by battery leakage which may result in damage and failure of the remote control.
Please do not use batteries of different types. It is not allowed to use old and new batteries together; the batteries should be replaced in pair.
Please do not throw the batteries into fire or charge or decompose the batteries; do not charge, short-circuit, disassemble/assemble, heat or burn used batteries. Please dispose the waste batteries pursuant to relevant regulations on environmental protection.

BLUETOOTH VOICE REMOTE CONTROL OPERATION MANUAL

BLUETOOTH PAIRING

If the Bluetooth of remote control is not paired, long press [ ]+[ – l keys to pair. When the TV show the device, select it and press[OK] key to finish.

NOTE

Some models may not be supported.
Your Location must correspond to the language for exact search results. Some functions may not be available if your location settings and language settings are different.
3. You can change the language according to language input settings. The languages available for voice recognition features may be changed in accordance with service operation policy.
4. Details of service may vary by model.
5. Before you use voice recogition, you should make sure remote control paired.

BASIC OPERATIONS

REMARK

Menu Operation Instruction in this manual explains the operation under TV mode, which could also be the reference to other modes.
Before powering on platform, please make sure that the power supply is stable.
The software of different countries is different. The specific software operation should be subject to the actual situation.
Because the product is constantly updated, the software is upgraded at any time, if the software operation is different from the actual operation, please refer to the actual product.

TURNING ON/STANDBY
Plug power cord into the electrical socket, then press [ ] key to turn on the TV. When it is the first time to turn on the TV, the Initialization Settings interface appears, please set it as needed. In power on state, press [ ] key to switch to standby mode.

SIGNAL SOURCE SELECTION
You can connect various devices to the TV set. If the video device has HDMI, Composite and other video output ports. You can select one of them and connect to corresponding input ports of the TV set. After connection, turn on the device and press [ l key, then menu of signal source will be displayed on the screen. Press the [ l key to select the input signal, and press [OKl key to confirm.

MENU OPERATION DESCRIPTION
Press [ l key to show the main menu on the screen:

Press [ l / [Tl key to select a menu from Channels, TV options, Record.
Press key to select an item in the menu.
Press [OKl key to enter the submenu.
Press key to adjust the value or setting.
When the main menu is shown on the screen, press key to exit the main menu; Press key to return to previous menu when the TV display the submenu.
During menu operation, the icons of invalid options are grey.

CHANNEL SCANNING

Scan the channels before watching the TV for the first time. Before scanning, please make sure that the antenna has been connected properly.

ANTENNA

Press key, and select Antenna. Press key, and press [◄l / [►l key to select Channel> Channels, then press [OKl key to enter.

Select Channel Scan, then press [OKl key to start auto scanning.
Select Single RF Scan. Press [ key to set RF Channel, then press [OKl key to start manual scanning.

CABLE
Press key, and select Cable. Press key, and press [ /[◄]/[►] key to select Channel> Channels, then press [OK] key to enter.

Select Channel Scan> Others, then press[OK] key. Set Frequency(KHz), Network ID, Scan Mode, and select Scan, then press[OK] key to start scanning. Select Single RF Scan, then press[OK] key.
Set Frequency (KHz), and select Scan, then press OK key to start scanning.

ATV
Press key, and select ATV. Press [ ] key, and press [ l /[◄] / [►] key to select Channel > Channels, then press [OK] key to enter.

Select Channel Scan, then press [OK] key to start auto scanning.
Select Analog Manual Scan, and set
Start Frequency (MHz). Select Scan Up or Scan Down, then press[OK] key to sta r t scanning.

INSTRUCTIONS FOR QUICK START

BASIC OPERATIONS

Press [f ] key to show the home page.

Press [◄] / [►] key to select an application;
Press[OK] key to run the application;
Press [ ] key to return to previous page;
4. Long press [ ] key to open all Apps.

QUICK START
Before using this device, please get familiar the operations below fo better experience.

LANGUAGE
In the smart mode, select the system language. Press [OKl key, and select Device Preferences > Language, and press [OK] key. Press key to select the desired language, and then press[OK] key.

SELECTING INPUT METHOD
In the sma t mode, press[ ] key, and select Device Preferences > Keyboard > Current keyboard, and press key to choose input method.

SETTING SYSTEM TIME
In the smart mode, press[ ] key, and select Device Preferences > Date & Time > Automatic date & time, then select Use network-provided time. You can also set the system time manually.

SMART APPLICATIONS APPS
The Apps helps users manage applications, and allows users to install or uninstall apps in local disk.

Press key, then press[◄]/[►] key to select an application and press[OK] key to enter.
How to install an application? Long press key, and select Get more apps, then press[OK] key to enter, search apps you want and install them. How to uninstall an application? Long press key, and select the opp that you want to uninstall, long press [OK] key and select to uninstall it.

MULTIMEDIAPLAYER

Open Multi Media Player app, and press[OK] key to enter and select VIDEO, PHOTO, MUSIC and TEXT. PLAYING FILES IN LOCAL DISK DEVICE Before playing files in the local disk, insert the USB mass storage device into the USB interface.

Open MuLtiMediaPlaye r opp, and press[OK] key to enter
Select the target folder or file, press[ok] key to enter the folder or play the file, and press [ ] key to return to the desktop.

Attention

1. Non-standard USB devices can’t be recognized probably; in this case, please replace a standard USB device;
2. The stream media system has certain restriction on the format of files; the playing will be abnormal if it is out of the system restriction;
3. Do not remove the USB device while playing,
or else the system or device may have problem; Before replacing the USB device, please turn off the machine’s power supply;
4. The system supports standard USB1.1 and USB2.0 devices, such as USB mass storage devices and mobile hard disks;
5. The maximum output current of the USB port
of this device is 500mA, and the self-protection will be enabled if it is beyond this limit; please use external power supply if an external device of higher current will be connected;
6. The system is complicated; when it is reading or playing files, the screen may be still or certain functions may be invalid due to the compatibility and stability of the USB device; in this case, please turn off the device and re- initialize the system.

Press key to display tool bar, While playing, select the menu option which you want, and press[OK] key to perform the operation; you can press [ ] key to exit playing.

NETWORK SETTINGS

WI-Fl

In smart mode, select Settings> Network & Internet> Wi-Fi, and press[OK] key. Press key to select and press[OK] key, then the machine automatically searches for nearby wireless network signal. The network searched without LOCK icon indicate that the machine can connect to the network without
a password. The network with icon LOCK indicate that it is encrypted and you must enter the correct password to connect to the network;
Select the desired network from the list, and press [OK] key;
Enter the password in the password box, then selectv’ and press[OK] key to connect to network.

ETHERNET

Select Settings > Network & Internet > Ethernet;
Set Proxy settings and IP settings then press [OK] key to connect to the internet.

WOW/WOL
It allows remote systems to wake up the sleeping TV by sending a frame of a specific format which the client anticipates. (It is available when network is connected.) Select Settings > Network & Internet > Wol / Wow and press [OK] key to set it to “On” or “Off’.

BLUETOOTH SETTING
In smart mode, select Settings> Remotes & accessories, and press[OK] key to enter. Select the device which you want to connect to and press[OK] key, then follow the prompt to connect.
Note: Select Settings > Device Preferences > About > Device name, and you can check the TV name.

RECOMMENDATIONS

ANDROID TV
Android TV gives you a smarter, easier way to get more from your TV.

GOOGLE ASSISTANT
Use your voice to search tor shows, control devices, and more – just ask Google.

GOOGLE PLAY
Google Play brings your favorite apps and games to your TV. Watch, play, and do-whatever you want, whenever you want.

CHROMECAST BUILT-IN
Easily cast your favorite movies, music, and more to your TV with Chromecast built-in.

IMPORTANT STATEMENT ON NETWORK SERVICES

All contents and services obtained from this TV set belong to the third party and are protected by laws
on copyright, patent right, trademark right and/or other intellectual property right. The said contents and services are only for your non-commercial purposes. It is not allowed to use any content or service without the authorization of the content owner or the service provider.
Our company will undertake no liability for any direct, indirect and accidental losses or damages caused
by your or a third party’s access to any content or service or any information or any third party software through this set under any circumstances.
Third party service may be changed, deleted or stopped without prior notice. Our company neither implies nor guarantees the continuous availability of some service or content within any period of time.
Our company is not held responsible for services related to the said service and content. Besides, we will not bear any liability for client service. Please directly contact relevant content and service providers if you have any problem and service request concerning relevant service or content.

USE OF A TV WALL MOUNTING

Warning

Please purchase a suitable TV wall mount when mounting your TV on the wall.
Ensure that the bearing capacity of the wall for mount installation is no less than 4 times the weight of the TV set and the wall mount so as to avoid falling.
Please refer to the instructions provided with the

TV set and wall mount for installation.

Make sure there is no cable or conduit in the wall section where a wall mount will be installed.
Please entrust a professional technician to complete installation. The company shall not be liable for accidents, personal injury or damage caused by improper installation of TV set.
If any screws are found in the screw hole for wall mount behind the TV set before installing the wall mount, the screws shall be removed and put in place for later use.
Please buy the wall screws according to the actual situation.
If there are flat tail self-tapping screws in the accessories, please decide whether it is suitable for use according to the actual situation of the wall mount.

TROUBLESHOOTING

Snowflake spots occur in the TV images and there is noise in accompanying sound.

Check it the antenna plug is loose or the cable is in good condition.
Check the antenna type (VHF/UHF).
Adjust the direction and position of the antenna.
Try to use signal enhancer.

There is neither display nor sound on the screen. The indication light is not on.
Check it the power line is connected.
Dotted line or strip disturbance occurs in TV images.
Do not use electric hair dryer aside the TV set and adjust the antenna direction to reduce disturbance.
Double images occur on the TV screen.

Use high oriented antenna.
Adjust the direction of the antenna.

The images are colorless.

Press key and select Picture> Saturation to increase color saturation.

The TV has no accompanying sound.

Adjust the volume to a proper degree.
Press key on the remote control to cancel mute mode.

No signal input images show on the machine screen.
The indicator light is blinking.

Check if the signal connecting cable is loose or falls oft. Reconnect it.
The machine may be in standby mode, please reboot.

The remote control distance is short or out of control.

Remove the object to avoid blocking the remote control receiving window.
Replace the battery. Online video play is very slow.
Please upgrade your network bandwidth to a higher one.
Please try to replace with other addresses to obtain better resources.

Machine is slow, system crash, can’t operate the machine.

Disconnect the power supply first, and connect the power supply after about 1-2 minutes, then turn on the TV again.

TV CONNECTORS

RJ45 – Wired Network input
HDMI2 input
HDMI1 (ARC) input
RF(T2) – TV Antenna input
RF(S2) – Satellite Antenna input
Mini AV input
CI+ -add-in modules slot
USB ports
OPTICAL – Optical Audio port
RF(T2) – TV antenna input
RF(2) – Satellite antenna input
CI+ – add-in module slot
OPTICAL – Optical Audio port
RJ45 – Wired network input
USB ports
HDMI2 input
HDMI1 (ARC) input
VIDEO – RCA analogue video input
L – RCA left channel audio input
R – RCA right channel audio input
RJ45 – Wired network input
USB ports
HDMI2 input
HDMI1 (ARC) input
F(T2) – TV antenna input
RF(S2) – Satellite antenna input
Mini AV input
CI+ – add-in modules slot
OPTICAL – Optical audio port
HDMI1 (ARC) input
CI+ – Add-in modules slot
VIDEO – RCA analogue video input
L- RCA left channel audio input
R- RCA right channel audio input
RJ45 – Wired Network input
OPTICAL – Optical audio input
USB ports
HDMI3 input
HDMI 2 input
RF(T2) – TV antenna input
RF(S2) – Satellite antenna input
RF(S2) – Satellite antenna input
RF(T2) – TV antenna input
RJ45 – Wired network input
HDMI3 input
HDMI 2 input
HDMI1 (ARC) input
USB ports
Mini AV input
CI+ – add-in modules slot
OPTICAL – Optical Audio input

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired Operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to Operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an Outlet on a circuit different from that to which the receiver is connected.
onsult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’ s RF Exposure guidelines, This equipment should be installed and operated
with minimum 20cm distance between the radiator and yOur body: Use Only the supplied antenna.