KOOOX Easy Chill Cool User Manual
- October 30, 2023
- KOOOX
Table of Contents
KOOOX Easy Chill Cool
READ THESE INSTRUCTIONS BEFORE ASSEMBLING!
PLEASE NOTE! Read these instructions prior to assembly and use! Check for damage before assembly. Any damage reported after assembly or damage caused by failure to observe these instructions is not covered by the guarantee.
Congratulations on the purchase of your bath! To keep the bathtub in optimal
condition, various recommendations for use and maintenance apply. Please read
these carefully. Any excess sealant can be removed with a sponge and plenty of
water.
Recommended use and maintenance
Cleaning the bath is very easy, because dirt has almost no chance to attach itself to the surface. The best way to maintain this effect is to dry the bath with a soft cloth after use. When it comes to maintenance, we make a distinction between two different finishes: mineral marble with a gelcoat top layer and acrylic.
Mineral marble with a gelcoat top layer (Easy)
To clean the bath, use mild soap and a soft sponge. Rub gently in a circular
motion and use plenty of water. For stubborn
stains that cannot be removed in the manner described above or if there is
damage, please contact our service department.
For stubborn stains that cannot be removed in the manner described above or if
there is damage, please contact our service department.
Please note!
Do not use solvents such as:
- alcohol (or alcohol-containing)
- acetone (or based on acetone)
- ammonia (or based on ammonia)
Please note!
Do not use abrasive or aggressive cleaning agents such as
- chlorine
- hydrochloric acid
- caustic soda
- limescale removers
- solvents based on anionic surfactants
The area where the logo is located must be treated with extra care. In addition, we do not recommend the use of bath bombs, bath pearls and oils. This is to prevent color stains.
Acrylic (Cool, Cool Wall and Chill)
To clean the bath, use a liquid cleaning agent, water and a soft sponge. Rub
gently in a circular motion and use plenty of water.
Always rinse immediately and thoroughly with water. For stubborn stains that
cannot be removed in the manner described above or if there is damage, please
contact our service department.
Please note!
Do not use solvents such as:
- alcohol (or alcohol-containing)
- acetone (or based on acetone)
- ammonia (or based on ammonia)
Please note!
Do not use abrasive or aggressive cleaning agents such as
- chlorine
- hydrochloric acid
- caustic soda
- limescale removers
- solvents based on anionic surfactants.
The area where the logo is located must be treated with extra care. In addition, we do not recommend the use of bath bombs, bath pearls and oils. This is to prevent color stains.
Before installation:
During installation of the piece you have acquired, handle it on a clean, dry surface to prevent scratching. Residues of setting materials should not be allowed to harden on the surface of the piece. To clean off residues of setting materials before they harden, remove them with a damp cloth, always avoiding scouring pads that could scratch the surface.
Optional Wooden Bath Shelf
| Colour inlay | y Art.nr. 78 cm | Art.nr. 88 cm |
|---|---|---|
| Brushed sst | WBSHELF78RVS | WBSHELF88RVS |
| Matt black | WBSHELF78MZ | WBSHELF88MZ |
| Matt white | WBSHELF78MW | WBSHELF88MW |
| Antracite | WBSHELF78A | WBSHELF88A |
Optional Wooden Bath Shelf Raw
Art.nr. ±78 cm Art.nr. ±88 cm
WBSHRAW78 WBSHRAW88
|
Optional Bath Shelf
Advise 88 cm Bath Shelf
*bath shelf not included
---|---
| 
Optional Bath Shelf
Advise 88 cm Bath Shelf
| 
Optional Bath Shelf
Advise 88 cm Bath Shelf
*bath shelf not included
|
Optional Bath Shelf
Advise 88 cm Bath She
DIMENSIONS
Instructions
IN THE BOX
TOOLS
Pre-installation
Area for freestanding tap
D Waste
IN THE BOX
TOOLS
Pre-installation
Area for free standing tap
D Waste
C Cold water
H Warm water /Hot Water
Instructions
IN THE BOX
TOOLS
Pre-installation
Freestanding taps
Area for free standing tap
D Waste
Instructions
IN THE BOX
Pre-installation
Freestanding taps
(D) Waste
(C) Cold Water
(H) Hot Water
Measurement In millimeters
Instructions
For complaints please contact the party from whom you purchased the product.
Subject to change without notice. Subject to printing and typographical
errors. Dimensions are indicative. LoooX BV excludes any liability arising
from using and/or installing LoooX product(s).
info@looox.eu
looox.eu
