SKIL RH1E3851JA Cordless Rotary Hammer Instruction Manual

SKIL RH1E3851JA Cordless Rotary Hammer

Product Information

The Brushless Cordless Rotary Hammer 3851 (RH1*3851**) is a cordless rotary hammer that is suitable for various drilling and chiseling applications. The product is manufactured by Skil BV, a company based in the Netherlands. The product conforms to all applicable provisions of the directives and regulations listed below:

• EU Declaration of Conformity
• EU-vaatimustenmukaisuusvakuutus
• EU izjava o sukladnosti
• EU-izjava o usaglasenosti
• Izjava o skladnosti ES
• EL-vastavusdeklaratsioon
• Deklarcija par atbilstbu EK standartiem

Product Usage Instructions

The Brushless Cordless Rotary Hammer 3851 is a versatile tool that can be used for various drilling and chiseling applications. Here are some instructions for using the product:

1. Charge the battery before using the product for the first time.
2. Select the appropriate drill bit or chisel for your application.
3. Insert the drill bit or chisel into the chuck and tighten it securely.
4. Adjust the depth gauge to the desired depth of drilling or chiseling.
5. Select the appropriate mode (drilling or chiseling) using the mode selector switch.
6. Hold the product firmly with both hands and press the trigger to start drilling or chiseling.
7. Release the trigger to stop drilling or chiseling.
8. After use, turn off the product and remove the battery.
9. Clean the product and store it in a dry place.

Always wear appropriate personal protective equipment such as safety glasses, gloves, and ear protection when using the product. Follow all safety instructions and warnings provided in the user manual to avoid injury or damage to the product.

INTRODUCTION

• This tool is intended for hammer drilling in concrete, brick and stone, as well as for drilling in wood, metal, ceramic and plastic; tools with electronic speed control and left/right rotation are also suitable for screw driving and thread cutting
• The hammering system in this tool outperforms any traditional ratcheting drill when drilling in concrete
• This tool is designed for use in combination with all standard SDS+ accessories
• This tool is not intended for professional use
• When parts are missing or damaged, please contact your dealer
• Read this instruction manual carefully before use and save it for future reference 3
• Pay special attention to the safety instructions and warnings; failure to follow these may result in serious injury

TECHNICAL DATA

TOOL ELEMENTS

• A Direction of rotation (forward/center- lock/reverse) selector
• B Switch for on/off and speed control
• C Switch for selecting operating mode
• D Locking sleeve
• E LED-light
• F Ventilation slots
• G Battery level indicator button
• H Depth gauge 9
• J Auxiliary handle

SAFETY

GENERAL POWER TOOL SAFETY WARNINGS

WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mainsoperated (corded) power tool or battery-operated (cordless) power tool.

1. WORK AREA SAFETY

2. Keep work area clean and well lit. Cluttered or dark areas invite accidents.

3. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

4. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control

5. ELECTRICAL SAFETY

6. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

7. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

8. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

9. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increased the risk of electric shock.

10. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

11. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

12. PERSONAL SAFETY

13. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

14. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safely shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.

15. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.

16. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

17. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

18. Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

19. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

20. Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

21. POWER TOOL USE AND CARE

22. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

23. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

24. Disconnect the plug from the power source and/or remove the battery pack, if detachable, from
    the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safely measures reduce the risk of starting the power tool accidentally.

25. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

26. Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

27. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

28. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

29. Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

30. BATTERY TOOL USE AND CARE

31. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.

32. Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.

33. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.

34. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

35. Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.

36. Do not expose a battery pack or tool to fire
    or excessive temperature. Exposure to fire or temperature above 130°C may cause explosion.

37. Follow all charging Instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.

38. SERVICE

39. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

40. Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.

SAFETY INSTRUCTIONS FOR CORDLESS HAMMER

• Wear ear protectors. Exposure to noise can cause hearing loss
• Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury
• Hold the power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring (cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock)

SAFETY INSTRUCTIONS WHEN USING LONG DRILL BITS WITH ROTARY HAMMERS

• Always start drilling at low speed and with the bit tip in contact with the workpiece. At higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting in personal injury.
• Apply pressure only in direct line with the bit and do not apply excessive pressure. Bits can bend, causing breakage or loss of control, resulting in personal injury.

GENERAL

• Do not work materials containing asbestos (asbestos is considered carcinogenic)
• This tool should not be used by people under the age of 16 years
• Dust from material such as paint containing lead, some wood species, minerals and metal may be harmful (contact with or inhalation of the dust may cause allergic reactions and/or respiratory diseases to the operator or bystanders); wear a dust mask and work with a dust extraction device when connectable
• Certain kinds of dust are classified as carcinogenic (such as oak and beech dust) especially in conjunction with additives for wood conditioning; wear a dust mask and work with a dust extraction device when connectable
• Follow the dust-related national requirements for the materials you want to work with

BEFORE USE

• Avoid damage that can be caused by screws, Anails and other elements in your workpiece; remove them before you start working
• Secure the workpiece (a workpiece clamped with clamping devices or in a vice is held more securely than by hand)
• Use suitable detectors to find hidden utility lines or call the local utility company for assistance (contact with electric lines can lead to fire or electrical shock; damaging a gas line can result in an explosion; penetrating a water pipe will cause property damage or an electrical shock)
• Ensure that direction-of-rotation selector B 2 is in the middle (locking) position before making any adjustments or changing accessories as well as when carrying or storing the tool.
• Be aware of the forces that occur as a result of jamming (especially when drilling metals); always use auxiliary handle J and take a secure stance

ACCESSORIES

• SKIL can assure flawless functioning of the tool only when original accessories are used
• Use only accessories with an allowable speed matching at least the highest no-load speed of the tool

AFTER USE

When you put away the tool, switch off the motor and ensure that all moving parts have come to a complete standstill

BATTERIES

• The battery supplied is partially charged (to ensure full capacity of the battery, completely charge the battery in the battery charger before using your power tool for the first time).
• Only use the following batteries and chargers with this tool
  • SKIL battery: BR1*31****
  • SKIL charger: CR1*31****
• Do not use the battery when damaged; it should be replaced immediately
• Do not disassemble the battery
• Do not expose tool/battery to rain
• Permitted ambient temperature (tool/charger/battery):
  • when charging 4…40oC
  • during operation -20…+50oC
  • during storage -20…+50oC

EXPLANATION OF SYMBOLS ON TOOL/BATTERY

• Read the instruction manual before use
• Batteries may explode when disposed of in fire, so do not burn battery for any reason
• Store tool/charger/battery in locations where temperature will not exceed 50oC
• Do not dispose of electric tools and batteries together with household waste material

USE

• Charging battery

  • read the safety warnings and instructions provided with the charger

• Removing/installing the battery

• Battery level indicator 7 press the battery level indicator button G to show the current battery level 7a

  • when the lowest level of the battery indicator starts flashing after pressing button G7b, the battery is empty
  • when 2 levels of the battery indicator start flashing after pressing button G7c, the battery is not within the allowable operating temperature range

• Battery protection
  The tool is suddenly being switched off or prevented from being switched on, when

  • the load is too high –> remove load and restart
  • the battery temperature is not within the allowable operating temperature range of -20 to +50oC –>2 levels of the battery level indicator start flashing when pressing button G7c; wait until battery has returned within the allowable operating temperature range
  • the battery is nearly empty (to protect against deep discharge) –> a low battery level or flashing low battery level 7b is shown by the battery level indicator when pressing button G; charge battery
  • do not continue to press the on/off switch after the tool is switched off automatically; battery may be damaged

• Changing direction of rotation

  • when not properly set in left/right position, switch B2 cannot be activated
  • change direction of rotation only when tool is at a complete standstill

• Installing and removing bits 9a & 9b

  • clean and lightly lubricate the SDS+ accessory before insertion
  • insert the accessory in SDS+ chuck while turning and pushing it until it engages; the accessory locks in position automatically
  • pull the accessory to check that it is locked correctly
  • remove the accessory by pulling back the locking sleeve
  • the SDS+ accessory requires freedom of movement which causes eccentricity when tool is off-loaded; however, the accessory automatically centres itself during operation without affecting drilling precision
  • do not use bits with a damaged shank

• Combined switch for on/off q and speed control

  • control the speed steplessly from zero to maximum by putting less or more pressure on the switch

• Selecting operating mode e

  • turn switch C to the desired operating mode until it snap-locks
  • 1 = normal drilling/screwdriving
  • 2 = Impact drilling
  • 3 = chiseling with a rotating chisel
  • 4 = chiseling with a fixed chisel
  • select operating mode only when the tool is switched off and the battery is removed
  • the hammer mechanism is activated by applying a slight pressure on the tool when the drill bit is in contact with the workpiece
  • it takes a short time for the hammer mechanism to reach full impact power
  • best hammer drilling results can be obtained with only a slight pressure on the tool; drilling performance will not improve by applying more pressure on the tool

• Chiseling with a fixed chisel
  switch off the tool and remove the battery

  • select “rotating” chiseling mode
  • place the chisel in the desired position
  • select “fixed” chiseling mode

• LED-light

  • LED-light E automatically lights on when activating the switch
  • when the LED worklight starts flashing, the battery protection is activated (see above)

• Holding and guiding the tool

  • while working, always hold the tool at the greycoloured grip area(s)
  • always use auxiliary handle (can be adjusted as illustrated)
  • keep ventilation slots F uncovered
  • do not apply too much pressure on the tool; let the tool do the work for you

• Adjusting drilling depth

APPLICATION ADVICE

• Use the appropriate bits o
  • only use sharp bits
• For drilling with non-SDS drill bits in wood, metal, and plastic, use an adapter (not standard included) p
  • clean and lightly lubricate the SDS+ accessory before insertion
  • pull back locking sleeve D and insert the adapter in SDS+ chuck while turning and pushing it until it engages; the adapter locks in position automatically
  • pull the adapter to check whether is it locked correctly
  • set switch C to normal drilling (only activate when tool is switched off and the switch is locked)
• When drilling ferrous metals
  • pre-drill a smaller hole, when a large hole is required
  • lubricate the drill bit occasionally with oil
• When turning in a screw at/near the cross-cut end or an edge of wood, pre-drill a hole in order to avoid cracking of the wood
• Splinter free drilling in wood
• Dustfree drilling in walls
• Dustfree drilling in ceilings
• Drilling in tiles without skidding
• For more information see www.skil.com

MAINTENANCE/SERVICE

• This tool is not intended for professional use
• Always keep tool clean (especially ventilation slots F2)
  • remove battery from tool before cleaning
• If the tool should fail despite the care taken in manufacturing and testing procedures, repair should be carried out by an after-sales service centre for SKIL power tools
  • send the tool undismantled together with proof of purchase to your dealer or the nearest SKIL service station (addresses as well as the service diagram of the tool are listed on www.skil.com)
• Be aware that damage due to overload or improper handling of the tool will be excluded from the warranty (for the SKIL warranty conditions see www.skil.com or ask your dealer)

ENVIRONMENT

Only for EU countries

• Do not dispose of electric tools, accessories and packaging together with household waste material
  • in observance of European Directive 2012/19/EC on waste of electric and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility
  • symbol 6 will remind you of this when the need for disposing occurs
  • prior to disposal protect battery terminals with heavy tape to prevent short-circuit Only for UK
• Do not dispose of electric tools, accessories and packaging together with household waste material
  • in observance of on Waste Electric and Electronic Equipment Regulations 2013 (SI 2013/3113), electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility
  • symbol 6 will remind you of this when the need for disposing occurs
  • prior to disposal protect battery terminals with heavy tape to prevent short-circuit

NOISE / VIBRATION

• Measured in accordance with EN 62841 the sound pressure level of this tool is 93.4 dB(A) and the sound power level 104.4 dB(A) (uncertainty K = 3 dB), and the vibrationÞ (triax vector sum; uncertainty K = 1.5 m/s2)
  • ✱ when hammer drilling in concrete 16.2 m/s2
  • ✱ when chiseling 12.8 m/s2
• The vibration emission level has been measured in accordance with a standardized test given in EN 62841; it may be used to compare one tool with another and as a preliminary assessment of exposure to vibration when using the tool for the applications mentioned
  • using the tool for different applications, or with different or poorly maintained accessories, may significantly increase the exposure level
  • the times when the tool is switched off or when it is running but not actually doing the job, may significantly reduce the exposure level
  • protect yourself against the effects of vibration by maintaining the tool and its accessories, keeping your hands warm, and organizing your work patterns

EU Declaration of conformity

We declare under our sole responsibility that the stated products comply with all applicable provisions of the directives and regulations listed below and are in conformity with the following standards. Technical file at:

*3851 RH13851****

• 2006/42/EC
• 2014/30/EU
• 2011/65/EU
• EN 62841-1:2015
• EN 62841-2-6:2020 + A11:2020
• EN 55014-1:2021
• EN 55014-2:2021
• EN 63000:2018

Skil BV
Rithmeesterpark 22 A1
4838 GZ Breda
The Netherlands

Olaf Dijkgraaf Approval Manager Skil BV, Rithmeesterpark 22 A1, 4838 GZ Breda, NL 02.08.2022

Declaration of Conformity We declare under our sole responsibility that the stated products comply with all

applicable provisions of the directives and regulations listed below and are in conformity with the following standards

Technical file at:

Cordless rotary hammer Article number           Chervon Europe Ltd., 34 Bridge Street, Reading, RG1 2LU, United Kingdom

Supply of Machinery (Safety) Regulations 2008 (SI 2008/1597) Electromagnetic Compatibility Regulations 2016 (SI 2016/1091)

The Restriction of the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment Regulations 2012 (SI 2012/3032)
Noise Emission in the Environment by Equipment for use Outdoors
Regulations 2001 (SI 2001/1701 and SI 2005/3525)
EN 62841-1:2015
EN 62841-2-6:2020+A11:2020
EN 55014-1:2021
EN 55014-2:2021
EN IEC 63000:2018
Chervon Europe Ltd., 34 Bridge Street,

Reading, RG12LU, United Kingdom, as
authorized representative (in terms of above
regulations) acting on behalf of
Skil BV, Rithmeesterpark 22 A1, 4838GZ
Breda, The Netherlands
James McCrory
Technical Service Manager

Place of issue: Reading
Date of issue: 02/08/2022

References

• Innovative Tools with Tech You Can Use |SKIL
• Innovative Tools with Tech You Can Use |SKIL

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>