LUVION Penguin Sleep Trainer Instruction Manual

: June 6, 2024
: LUVION

Table of Contents

PACKAGE CONTENTS
PRODUCT OVERVIEW
INTRODUCTION
IMPORTANT SAFETY PRECAUTION AND MAINTENANCE INSTRUCTIONS
FIRST SET UP
HOW TO USE
SPECIFICATIONS
Contact Us
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**LUVION Penguin Sleep Trainer Instruction Manual

**

PACKAGE CONTENTS

Penguin sleeptrainer
USB cable
This Instruction manual

PRODUCT OVERVIEW

Penguin sleeptrainer (Fig. 1)
Product Overview

Increase number button
Decrease number button
Color nightlight switch
Clock setting button
Alarm setting button
Power switch
Luminous penguin
24 hours indicator
Clock display
Alarm clock indicator
Charging indicator
Charging port

INTRODUCTION

Thank you for purchasing the Luvion Penguin sleep trainer. Make sure you always keep your original proof of purchase. For warranty cases you will always be asked to show a copy of your proof of purchase. For warranty claims you can contact the Luvion dealer or the local Luvion representative. More information can be found at www.luvion.com
This manual contains all the information you need, to be able to use this Luvion Penguin sleep trainer safely and with pleasure. Before using the sleep trainer, we recommend that you read this manual carefully. We ask for your extra attention for the safety instructions.

IMPORTANT SAFETY PRECAUTION AND MAINTENANCE INSTRUCTIONS

Please note the following precautions before usage. Failure to comply may be dangerous.

Please charge the product at least 30 minutes prior to use;
Please keep the product away from high temperature and high humidity environments;
Do not clean the base with acid or alkaline liquids;
Do no attempt to dissemble, repair or modify this product without authorization;
The working voltage of this product is 5V, please use the included USB cable;
Please use a dry soft cloth to wipe dust off the silicon material,
Note: turn off the product before doing this;
Do not immerse the product nor the USB cable in water

FIRST SET UP

Connect the product to a USB port or with an adapter to the mains. Use the included USB cable to charge the penguin. Please note: there is no 220v adapter included.
Please make sure to charge the penguin before use. It is recommended to charge at least 30 mintutes prior to use.
This penguin is a sleeptrainer that gives your child a sign when it is ok for them to get up. You can also use it as a night light for in the nursery.

HOW TO USE

SWITCH ON/OFF THE PENGUIN

Turn the penguin on/off by sliding the button to the right/left (6).

NIGHTLIGHT

When product has been activated (ON-modus), press once on the top (of the penguin) to activate the night light.
When light has been activated: touch and hold the top to adjust the brightness. Press again to turn off the night light.

Good to know! To make it easier for parents: when the ON-modus has been activated, the night light will turn off automatically after 20 minutes. This to prevent parents from going back to the room to turn off the night light when the child is asleep.

SET TIME

Hold this clock button (4) until you see the time display blinking. Set the hours by using the ‘+/-‘ button (1 & 2) and press again on the clock button (4) to confi rm.You will now see the minutes blinking on the time display
Set the minutes with the ‘+/-‘ button and press again on this clock button (4) to confi rm. You will now see the the 12/24 blinking on the display.
Choose between a 12- or 24-hours format while using the the ‘+/-‘ buttons (1 & 2) and press again on this clock button (4) to confi rm.

SET ‘OK TO GET UP’ ALARM

Press once on the alarm button (5) if you wish to see what time the alarm is set
Hold the button until you see the time display blinking. Set the hours with the ‘+/-‘ button and press again on this button (5) to confi rm.You will see the minutes blinking on the time display
Set the minutes with the ‘+/-‘ button and press again on this button (5) to confi rm.‘ON’ will appear on the display. Press again on this button (5) to confi rm or use the ‘+/-‘ buttons (1 & 2) for ‘OFF’ if you wish to deactive the alarm.Then press again on the alarm button (5) to confi rm.

Good to know! By choosing ‘OFF’, it gives (the) parent(s) the option to still use the nightlight without having to shut of the penguin completely. 30 minutes prior to the alarm, the penguin will light up gradually to warm light. When it’s time to get up the penguin will turn green. This is the ‘ok’ sign for children to get out of their bed. Press any button to turn off the green light.

SWITCH BETWEEN WARM OR BRIGHT LIGHT

Switch between warm or bright light by pressing on this button (3). The brightness can be adjusted by pressing on the head of the penguin as mentioned before on ‘how to use’.

KEYLOCK

Press and hold the color nightlight switch (3) and alarm setting button (5) at the same time to lock all buttons. ‘ON’ will appear on the display. Press and hold these two buttons again to unlock all buttons. You will see ‘OFF’ on the display.
When the key lock has been activated and the alarm has been set as ‘ON’ as mentioned before on ‘how to use’, the penguin will still light up in green when the slide button (6) has been turned to OFF. This to prevent the child(ren) from shutting of the penguin sleep trainer completely. Should you wish to deactivate the alarm light, following the instructions mentioned before on ‘how to use’.

Good to know! Tapping on the head of the penguin to activate the light is still possible as this doesn’t affect the alarm settings of the penguin.