aiwa MI-X 60 KATANA Y BT Speaker User Manual
- June 6, 2024
- Aiwa
Table of Contents
aiwa MI-X 60 KATANA Y BT Speaker
Important Safety Instructions
- Please do not place device near any form of heat sources.
- Please use the accessories specified by the manufacturer.
- Please refer all servicing/repairs to a qualified personnel should there by any form of damage to the device.
- Keep this user manual for future reference/ troubleshooting.
- Please heed ALL safety cautions.
Safety Cautions
- Always keep device AWAY from fire and heat sources.
- Do NOT attempt to disassemble or alter the device.
- Do NOT expose device to excessive heat (Direct sunlight etc.).
- Do NOT immerse device into any form of liquids.
Unboxing
AIWA MI-X60 KATANA Y Speaker- Type-C Charging Cable
- 3.5mm AUX Cable
- User Manual
Please refrain from using any damaged components. Contact your local authorized AIWA distributor/customer service should you need any assistance.
Product Specifications
Audio Related
Frequency Response: 100Hz – 15kHz
Signal to Noise Ratio: ≥70dB
Drivers: 2 X 66mm (4Ω)
Power & Battery
Power Output: 2 X 15 W
Playback Time: 6-8 Hours (Varies by volume level & content)
Charging Time: 2-3 Hours
Charging Current: DC 5V /2000mA Type C
Battery: Built In Lithium Ion (3.6V / 4000mAh)
Transmission Standards
BT Version: V5.0
BT Profile: A2DP V1 .2;AVRCP V1.4,GAVDP V1.2;AVDTP V1.2;SPP V1.2;AVCTP V1.2
Physical Dimensions
Size: 2259376 mm
Weight: 1190g
Other Attributes
IP Rating: IPX5
Protected against low pressure water streams from any angle, please DO NOT
submerge the speaker in any liquids. Please ensure all exposed ports are
sealed & all cable connections are removed before any form of liquid exposure.
The above playback & charging times are estimated values tested in a practical
environment and may vary upon individual usage habits.
Product Overview
(Answer/ End Call: Click Once)- (Reject Call: Press and Hold)
- (Re-dial last number: Press and Hold) Mute (Click Once)
- Mute function is only available during AUX Playback mode.
Connecting the Product
- Turn on Bluetooth (BT) on your mobile device.
- Turn on the speaker.
- Search and connect to “AIWA Katana Y” from your mobile device.
- Press and hold both “Volume Up +” & “Volume Down – “ button to disconnect BT.
MI-X60 automatically reconnects to the last paired mobile device it was
connected to.
MI-X60 saves up to 8 paired devices.
TWS Function
Synced audio playback from two (2) speakers for true wireless stereo
experience. (Only compatible with the same speaker model: MI-X60 Katana Y)
- Turn on both speakers.
- Double Click Power button on BOTH speakers until a notification prompt beep is heard.
- Connect to one of the speakers via BT on your mobile device.
- TWS (True Wireless Stereo) playback is now available.
Listening to music from the external audio source
USB Playback
Insert USB Disk into the designated port. (Supports MP3, WAV, APE, FLAC, WMA)
AUX-IN
Connect speaker and Audio source via a 3.5mm AUX Cable.
Note: Under Aux – In Mode, Next track/Previous track/Call Control
functions are not available.
Micro SD Playback
Insert Micro-SD card into the designated port. (Supports MP3, WAV, APE, FLAC,
WMA)
Battery & Charging
Connect the speaker to a suitable power source via the Type-C Charging Cable.
LED Indicator Light:
- Blinks RED: Low Battery (< 10 %)
- Solid RED: Charging in progress
- RED Light extinguishes upon full charge
Approximate charging time: 3 Hours Please fully charge up the speaker prior to first time usage.
Perform Factory Reset
- Turn on the speaker.
- Insert a pin ( < 3mm Φ ) into the reset hole button for two (2) seconds until the LED Indicator light turns off.
Aiwa Electronics Int’l Co., Ltd. Explore more at www.int-aiwa.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>