metabo SLA 14.4-18 LED Cordless Inspection Lamp Instruction Manual
- October 30, 2023
- metabo
Table of Contents
metabo SLA 14.4-18 LED Cordless Inspection Lamp
Product Information
The SLA 14.4-18 LED, ULA 14.4-18 LED, and PowerMaxx ULA 12 LED are portable lamps produced by Metabo. They are designed to be used with original Metabo battery packs of 18V, 14.4V, and 12V. The lamps have a high-quality LED that emits bright light with a color temperature of 5000K and a color rendering index (CRI) of over 65. The lamps have a lightweight design and come with a span neck diameter of D.
Product Usage Instructions
General Safety Instructions
- Always use the lamp and accessories as per the instructions mentioned in the user manual to avoid any risk of injury.
- Read all safety warnings and instructions carefully before using the product. Failure to follow them may result in electric shock, fire, and/or serious injury.
- Keep all safety instructions and information for future reference.
- Charge the batteries only in the recommended chargers designed for the specific type of battery to avoid any fire hazard.
- Insert the correct batteries in the lamp to avoid any risk of injury and fire hazard.
- Avoid contact between batteries and small metal objects that could bridge the contacts, which can cause burns or fires.
- In case of accidental contact with battery fluid, rinse the affected area thoroughly or seek immediate medical assistance if it enters your eyes.
Usage
- To turn on/off the lamp, use the switch (3) provided.
- Do not direct the light towards the eyes of people or animals.
Cleaning
- Do not use aggressive cleaning agents to clean the lamps.
Repair
- For any repairs, contact the manufacturer or an authorized service center.
Environmental Protection
- Dispose of the product and battery packs in accordance with local regulations and environmental guidelines.
| ULA 14.4-18 LED| SLA 14.4-18 LED| PowerMaxx ULA 12 LED
---|---|---|---
Serial Number| 00368..| 00370..| 00788..
U| V| 14,4 – 18| 14,4 – 18| 12
P| W| 7| 8| 3,5
Phi| lm| 280| 410| 210
CRI| –| > 65| > 70| > 65
CCT| K| 5000| 5000| 5000
m| kg (lbs)| 0,39 (0.76)| 0,46 (1.01)| 0,26 (0.60)
General safety instructions
WARNING – Reading the operating instructions will reduce the risk of
injury.
WARNING Read all safety warnings and instructions. Failure to follow all
safety warnings and instructions may result in electric shock, fire and/or
serious injury.
Keep all safety instructions and information for future reference.
Always charge batteries in chargers recommended by the manufacturer. Chargers
designed for a specific type of battery may pose a fire hazard when used
together with other battery types.
You must always insert the correct batteries in the lamp. Using other
batteries may cause injuries and pose a fire hazard.
When not in use, keep batteries away from paper clips, coins, keys, nails,
screws or other small metal objects that could bridge the contacts. Short
circuits between battery contacts can cause burns or fires.
Fluid may escape if batteries are used inappropriately. Avoid all contact with
this fluid. In the event of accidental skin contact, rinse the affected area
thoroughly. If the fluid enters your eyes, seek immediate medical assistance.
Escaping battery fluid can cause skin irritation or burns.
Do not operate the lamp in potentially explosive environments containing
flammable dust, fluids or gases . The lamp can generate sparks which may
ignite dust or vapours.
Avoid accidental operation. Make sure that the lamp is switched off before
connecting the battery and before picking up or carrying the lamp.
Accidentally pressing the switch on the device or connecting the device to the
power supply when already switched on can lead to accidents.
Always switch off the lamp when not in use.
Never use electrical devices with a defective switch. Electrical devices that
can no longer be switched on or off are dangerous and must be repaired
immediately.
Remove the battery before adjusting, cleaning and storing the device or
changing accessories. These precautionary measures prevent accidental
operation of the lamp.
When not in use, keep the lamp out of the reach of children. Do not allow
personnel to use the device unless they are already familiar with it or have
read these instructions. Electrical devices are dangerous when used by
inexperienced personnel.
Maintain the device carefully. Check that all moving parts are functioning
correctly and do not seize, make sure that no parts are broken or damaged to
an extent where they affect the function of the lamp. Have damaged parts
repaired before using the device. Many accidents are caused by poorly main-
tained electrical tools.
Do not operate the lamp without a window, or with a window that is damaged.
Use the lamp, accessories, etc. as described in these instructions. Take into
consideration the working conditions and tasks required. Using elec-trical
devices for applications other than those intended can lead to dangerous
situations.
Always have your lamp repaired by qualified personnel using genuine spare
parts. This will ensure that the device functions safely.
Keep your lamp away from heat sources and fires. Do not store your lamp in
moist or wet ambient conditions. Do not store in locations where temper-atures
may reach or exceed 40 °C. Examples include alcoves, motor vehicles or metal
structures during the summer.
Do not expose the lamp to rain or damp conditions.
Do not leave the lamp on while unattended.
The device is designed for use indoors.
Never use an incomplete lamp, or one on which an unauthorized modification has
been made. Do not switch on the lamp if tool parts or guard devices are
missing or defective.
Ensure it is steady. Secure the lamp properly if it is attached to a stand.
- Protect battery packs from water and moisture!
- Do not expose battery packs to naked flame!
- Do not use faulty or deformed battery packs! not open battery packs!
- Do not touch or short-circuit battery packs!
- Slightly acidic, flammable fluid may leak from defective li-ion battery packs!
- If battery fluid leaks out and comes into contact with your skin, rinse immediately with plenty of water. If battery fluid leaks out and comes into contact with your eyes, wash them with clean water and seek medical attention immediately.
Warning – general danger!
- Battery packs must not be disposed of with regular waste. Return faulty or used battery packs to your Metabo dealer!
- Do not allow battery packs to come into contact with water!
- Do not direct the light beam into the eyes of people or animals.
- Do not look into the light source.
SLA 14.4-18 LED:
In accordance with IEC/EN 62471 for
“Photobiological safety of lamps and lamp systems”, these lamps are in the
Exempt Group.
ULA 14.4-18 LED, PowerMaxx ULA 12 LED: Risk group 2:
ATTENTION
possible hazardous optical radiation.
Do not look into the lamp during longer operation. Could cause damage to the
eyes.
Overview
See image on the title page.
- Window/outlet of LED beam
- Lamp head
- On/off switch
- Battery pack release button
- Battery pack*
- depending on model
Use
Insert a fully charged battery pack (5) (taking into account the particular
model).
Turn on and off at the switch (3).
Do not direct the light beam into the eyes of people or animals.
The ideal storage temperature for battery packs is between 10°C and 30°C.
Depending on model: Tilt the lamp head (2) to adjust the angle of the light
beam.
Cleaning
Remove the battery pack from the device before carrying out cleaning.
Do not clean with aggressive cleaning agents.
Ensure that the lamp and the battery contacts are dry.
Repairs
Repairs to Metabo machines must be carried out by qualified electricians only!
If any of your Metabo power tools require repairs, please contact your Metabo
service centre. For addresses see www.metabo.com.
You can download spare parts lists
fromwww.metabo.com.
Environmental Protection
Do not allow battery packs to come into contact with water!
To protect the environment, do not dispose of power tools or battery packs in
household waste. Observe national regulations on separated collection and
recycling of disused machines, packaging and accessories.
Before disposal, discharge the battery pack in the tool. Prevent the contacts
from short-circuiting (e. g. by protecting them with adhesive tape).
Technical specifications
To be used only with original Metabo battery packs:
18 V: 6.25589, 6.25596, 6.25578, 6.25594, 6.25343, 6.25591, 6.25592, 6.25342,
6.25341, etc.
14,4 V: 6.25588, 6.25595, 6.25590, etc.
12 V: 6.25406, 6.25349, etc.
Explanatory notes on the specifications on page 3. Changes due to
technological progress reserved.
- U = voltage (for 12 V battery pack: max. voltage = 12 V, nominal voltage = 10.8 V)
- P = Power consumption
- Phi = Lamp flux
- CRI = Colour rendering index
- CCT = Correlated colour temperature
- m = Weight (without battery pack)
- D = D=Collar diameter
- Direct current
The technical specifications quoted are subject to tolerances (in compliance with the relevant valid standards).
Metabowerke GmbH
Metabo-Allee 1, P.O. Box 1229, 72602 Nürtingen,
Germany www.metabo.com
Changes due to technological progress reserved.
© by Metabo
Metabowerke GmbH
Metabo-Allee 1
72622 Nuertingen
Germany
www.metabo.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>