AEG SKB688E1AF Refrigerator User Manual

: October 30, 2023
: AEG

AEG SKB688E1AF Refrigerator

AEG SKB688E1AF Refrigerator-product

The SKB688E1AF is a refrigerator with internal lighting and flammable gas, isobutane (R600a), as the refrigerant. The following are safety instructions, installation instructions, and tips for usage, care, and cleaning.

Safety Information

Before installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result.

Safety Instructions

Installation

Only a qualified person must install this appliance.

Electrical Connection

Ensure that the supply cord is not trapped or damaged. Do not use multi-plug adapters and extension cables to avoid the risk of fire and electric shock.

Use

Be careful not to cause damage to the refrigerant circuit containing isobutane to avoid the risk of injury, burns, electric shock, or fire.

Internal Lighting

The internal lighting is for indicating the status of the appliance only. They are not intended to be used in other applications and are not suitable for household room illumination to avoid the risk of electric shock.

Care and Cleaning

Do not use abrasive cleaners or sharp metal scrapers to clean the appliance to avoid the risk of injury or damage.

Service

Always use original spare parts. When contacting an authorized service center, ensure that you have the following data available: Model, PNC, Serial Number. The information can be found on the rating plate.

Installation Instructions

Location

Do not install the appliance near the heat source or in a place with direct sunlight. Make sure that air can circulate freely around the back of the cabinet. This appliance should be installed in a dry, well-ventilated indoor position. The correct operation of the appliance can only be guaranteed within the specified temperature range.

Electrical Connection

The appliance must be installed with a disconnect device and a plug that is easily accessible after installation.

Ventilation Requirements

Refer to the installation instruction document to install your appliance and fix it according to the instructions to avoid a risk of instability of the appliance.

Dimensions

The dimensions of the refrigerator are as follows:

Width: 556mm
Height: 916mm
Depth: 549mm

If you have any doubts regarding where to install the appliance, please turn to the vendor, customer service, or the nearest authorized service center.

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
Visit our website to:

Get usage advice, brochures, trouble shooter, service and repair information: www.aeg.com/support
Register your product for better service: www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance: www.aeg.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.

Subject to change without notice.

SAFETY INFORMATION

Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

Children and vulnerable people safety

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
Children aged from 3 to 8 years are allowed to load and unload the appliance provided that they have been properly instructed.
This appliance may be used by persons with very extensive and complex disabilities provided that they have been properly instructed.
Children of less than 3 years of age should be kept away from the appliance unless continuously supervised.
Children should be supervised to ensure that they do not play with the appliance.
Children shall not carry out cleaning and user maintenance of the appliance without supervision.
Keep all packaging away from children and dispose of it appropriately.

General Safety

This appliance is for storing food and baverages only.
This appliance is designed for single household domestic use in an indoor environment.
This appliance may be used in, offices, hotel guest rooms, bed & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not exceed (average) domestic usage levels.
To avoid contamination of food respect the following instructions:
- do not open the door for long periods;
- clean regularly surfaces that can come in contact with food and accessible drainage systems;
- store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.
WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
Do not use water spray and steam to clean the appliance.
Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.
When the appliance is empty for long period, switch it off, defrost, clean, dry and leave the door open to prevent mould from developing within the appliance.
Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard.

SAFETY INSTRUCTIONS

Installation

WARNING!
Only a qualified person must install this appliance.

Remove all the packaging.
Do not install or use a damaged appliance.
Do not use the appliance before installing it in the built-in structure due to safety manner.
Follow the installation instructions supplied with the appliance.
Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
Make sure the air can circulate around the appliance.
At first installation or after reversing the door wait at least 4 hours before connecting the appliance to the power supply. This is to allow the oil to flow back in the compressor.
Before carrying out any operations on the appliance (e.g. reversing the door), remove the plug from the power socket.
Do not install the appliance close to radiators or cookers, ovens or hobs.
Do not expose the appliance to the rain.
Do not install the appliance where there is direct sunlight.
Do not install this appliance in areas that are too humid or too cold.
When you move the appliance, lift it by the front edge to avoid scratching the floor.

Electrical connection

WARNING!
Risk of fire and electric shock.

WARNING!
When positioning the appliance, ensure the supply cord is not trapped or damaged.

WARNING!
Do not use multi-plug adapters and extension cables.

The appliance must be earthed.
Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.
Always use a correctly installed shockproof socket.
Make sure not to cause damage to the electrical components (e.g. mains plug, mains cable, compressor). Contact the Authorised Service Centre or an electrician to change the electrical components.
The mains cable must stay below the level of the mains plug.
Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.

Use

WARNING!
Risk of injury, burns, electric shock or fire.

The appliance contains flammable gas, isobutane (R600a), a natural gas with a high level of environmental compatibility. Be careful not to cause damage to the refrigerant circuit containing isobutane.
If damage occurs to the refrigerant circuit, make sure that there are no flames and sources of ignition in the room. Ventilate the room.
Do not let hot items to touch the plastic parts of the appliance.
Do not store flammable gas and liquid in the appliance.
Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
Do not touch the compressor or the condenser. They are hot.

Internal lighting

WARNING!
Risk of electric shock.

This product contains a light source of energy efficiency class G.
Concerning the lamp(s) inside this product and spare part lamps sold separately: These lamps are intended to withstand extreme physical conditions in household appliances, such as temperature, vibration, humidity, or are intended to signal information about the operational status of the appliance. They are not intended to be used in other applications and are not suitable for household room illumination.

Care and cleaning

WARNING!
Risk of injury or damage to the appliance.

Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.
This appliance contains hydrocarbons in the cooling unit. Only a qualified person must do the maintenance and the recharging of the unit.
Regularly examine the drain of the appliance and if necessary, clean it. If the drain is blocked, defrosted water collects in the bottom of the appliance.

Service

To repair the appliance contact the Authorised Service Centre. Use original spare parts only.
Please note that self-repair or non-professional repair can have safety consequences and might void the guarantee.
The following spare parts will be available for 7 years after the model has been discontinued: thermostats,temperature sensors, printed circuit boards, light sources, door handles, door hinges, trays and baskets. Please note that some of these spare parts are only available to professional repairers, and that not all spare parts are relevant for all models.
Door gaskets will be available for 10 years after the model has been discontinued.

Disposal

WARNING!
Risk of injury or suffocation.

Disconnect the appliance from the mains supply.
Cut off the mains cable and discard it.
Remove the door to prevent children and pets to be closed inside of the appliance.
The refrigerant circuit and the insulation materials of this appliance are ozone-friendly.
The insulation foam contains flammable gas. Contact your municipal authority for information on how to discard the appliance correctly.
Do not cause damage to the part of the cooling unit that is near the heat exchanger.

INSTALLATION

WARNING!
Refer to Safety chapters.
WARNING!
Refer to installation instruction document to install your appliance.
WARNING!
Fix the appliance in accordance with installation instruction document to avoid a risk of instability of the appliance.

Dimensions

AEG SKB688E1AF Refrigerator-fig1

AEG SKB688E1AF Refrigerator-fig8

³ the height, width and depth of the appliance including the handle, plus the space necessary for free circulation of the cooling air, plus the space necessary to allow door opening to the minimum angle permitting removal of all internal equipment

Location

To ensure appliance’s best functionality, you should not install the appliance in the nearby of the heat source (oven, stoves, radiators, cookers or hobs) or in a place with direct sunlight. Make sure that air can circulate freely around the back of the cabinet.
This appliance should be installed in a dry, well ventilated indoor position.
This appliance is intended to be used at ambient temperature ranging from 10°C to 43°C.
The correct operation of the appliance can only be guaranteed within the specified temperature range.
If you have any doubts regarding where to install the appliance, please turn to the vendor, to our customer service or to the nearest Authorised Service Centre.
It must be possible to disconnect the appliance from the mains power supply. The plug must therefore be easily accessible after installation.

Electrical connection

Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your domestic power supply.

The appliance must be earthed. The power supply cable plug is provided with a contact for this purpose. If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with current regulations, consulting a qualified electrician.
The manufacturer declines all responsibility if the above safety precautions are not observed.
This appliance complies with the E.E.C. Directives.

Ventilation requirements
The airflow behind the appliance must be sufficient.

CAUTION!
Refer to the installation instructions for the installation.

Door reversibility
Please refer to the separate document with instructions on installation and door reversal.

CAUTION!
At every stage of reversing the door protect the floor from scratching with a durable material.

CONTROL PANEL

Temperature indicator LED
Coolmatic indicator
Coolmatic button
Temperature regulator ON/OFF button

Switching on

Insert the plug into the wall socket.
Touch the temperature regulator button if all LED indicators are off.

Switching off
Keep touching the temperature regulator button for 3 seconds.
All indicators light off.

Temperature regulation
To operate the appliance, touch the temperature regulator until the LED corresponding to the required temperature lights up. Selection is progressive, varying from 2°C to 8°C. Recommended setting is 4°C.

Touch temperature regulator. Current temperature indicator blinks. Any time you touch the temperature regulator, the setting moves by one position. The corresponding LED blinks for a while.
Touch the temperature regulator until the required temperature is selected.
The set temperature will be reached within 24 hours. After a power failure the set temperature remains stored.

Coolmatic function
If you need to insert in the fridge compartment a large amount of food at ambient temperature, for example after doing the grocery shopping, we suggest activating theCoolmatic function to chill the products more rapidly and to avoid warming the other food which is already in the refrigerator.
To activate Coolmatic function press the Coolmatic button. The Coolmatic indicator switches on.

This function stops automatically after 6 hours.

It is possible to deactivate the function at any time by pressing Coolmatic button again. The Coolmatic indicator switches off.

DAILY USE

CAUTION!
This refrigerating appliance is not suitable for freezing foodstuffs.

Positioning the door shelves
To permit storage of food packages of various sizes, the door shelves can be placed at different heights.

Gradually pull the shelf up until it comes free.
Reposition as required.

Movable shelves
The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired.

Do not move the glass shelf above the vegetable drawer to ensure correct air circulation.

Vegetable drawer
There is a special drawer in the bottom part of the appliance suitable for storage of fruits and vegetables.

HINTS AND TIPS

Hints for energy saving

Most efficient use of energy is ensured in the configuration with the drawers in the bottom part of the appliance and shelves evenly distributed. Position of the door bins does not affect energy consumption.
Do not open the door frequently or leave it open longer than necessary.
Do not set too high temperature to save energy unless it is required by the characteristics of the food.
If the ambient temperature is high and the temperature control is set to low temperature and the appliance is fully loaded, the compressor may run continuously, causing frost or ice formation on the evaporator. In this case, set the temperature control toward higher temperature to allow automatic defrosting and to save energy this way.
Ensure a good ventilation. Do not cover the ventilation grilles or holes.

Hints for fresh food refrigeration

Good temperature setting that ensures preservation of fresh food is a temperature less than or equal to + 4°C.
Higher temperature setting inside the appliance may lead to shorter shelf life of food.
Cover the food with packaging to preserve its freshness and aroma.
Always use closed containers for liquids and for food, to avoid flavours or odours in the compartment.
To avoid cross-contamination between cooked and raw food, cover the cooked food and separate it from the raw one.
It is recommended to defrost the food inside the fridge.
Do not insert hot food inside the appliance. Make sure it has cooled down at room temperature before inserting it.
To prevent food waste the new stock of food should always be placed behind the old one.

Hints for food refrigeration

Fresh food compartment is the one marked (on the rating plate) with
Meat (all types): wrap in a suitable packaging and place it on the glass shelf above the vegetable drawer. Store meat for at most 1-2 days.
Fruit and vegetables: clean thoroughly (eliminate the soil) and place in a special drawer (vegetable drawer).
It is advisable not to keep the exotic fruits like bananas, mangos, papayas etc. in the refrigerator.
Vegetables like tomatoes, potatoes, onions, and garlic should not be kept in the refrigerator.
Butter and cheese: place in an airtight container or wrap in an aluminium foil or a polythene bag to exclude as much air as possible.
Bottles: close them with a cap and place them on the door bottle shelf, or (if available) on the bottle rack.
Always refer to the expiry date of the products to know how long to keep them.

CARE AND CLEANING

WARNING!
Refer to Safety chapters.

Cleaning the interior
Before using the appliance for the first time, the interior and all internal accessories should be washed with lukewarm water and some neutral soap to remove the typical smell of a brand-new product, then dried thoroughly.

CAUTION!
Do not use detergents, abrasive powders, chlorine or oil-based cleaners as they will damage the finish.
CAUTION!
The accessories and parts of the appliance are not suitable for washing in a dishwasher.

Periodic cleaning
The equipment has to be cleaned regularly:

Clean the inside and accessories with lukewarm water and some neutral soap.
Regularly check the door seals and wipe them clean to ensure they are clean and free from debris.
Rinse and dry thoroughly.

Defrosting of the refrigerator
Frost is automatically eliminated from the evaporator of the refrigerator compartment during normal use. The defrost water drains out through a trough into a special container at the back of the appliance, over the motor compressor, where it evaporates.
It is important to periodically clean the defrost water drain hole in the middle of the refrigerator compartment channel to prevent the water overflowing and dripping onto the food inside.
For this purpose use the tube cleaner provided with the appliance.

Period of non-operation
When the appliance is not in use for long period, take the following precautions:

Disconnect the appliance from electricity supply.
Remove all food.
Clean the appliance and all accessories.
Leave the door open to prevent unpleasant smells.

TROUBLESHOOTING

WARNING!
Refer to Safety chapters.

What to do if…

AEG SKB688E1AF Refrigerator-fig10 AEG
SKB688E1AF Refrigerator-fig11 AEG SKB688E1AF Refrigerator-
fig12

If the advice does not lead to the desired result, call the nearest Authorized Service Centre.

Replacing the lamp
The appliance is equipped with a longlife LED interior light.

Only service is allowed to replace the lighting device. Contact your Authorised Service Centre.

Closing the door

Clean the door gaskets.
If necessary, adjust the door. Refer to installation instructions.
If necessary, replace the defective door gaskets. Contact the Authorised Service Centre.

NOISES

AEG SKB688E1AF Refrigerator-fig7

TECHNICAL DATA

The technical information is situated in the rating plate on the internal side of the appliance and on the energy label.
The QR code on the energy label supplied with the appliance provides a web link to the information related to the performance of the appliance in the EU EPREL database. Keep the energy label for reference together with the user manual and all other documents provided with this appliance.
It is also possible to find the same information in EPREL using the link https://eprel.ec.europa.eu and the model name and product number that you find on the rating plate of the appliance.
See the link www.theenergylabel.eu for detailed information about the energy label.

INFORMATION FOR TEST INSTITUTES

Installation and preparation of the appliance for any EcoDesign verification shall be compliant with EN 62552.
Ventilation requirements, recess dimensions and minimum rear clearances shall be as stated in this User
Manual at Chapter 3. Please contact the manufacturer for any other further information, including loading plans.

ENVIRONMENTAL CONCERNS

Recycle materials with the symbol. Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.