21109 Hyper GO Lancia Delta HF Integrale Instruction Manual

21109 Hyper GO Lancia Delta HF Integrale

Specifications

• Product Name: HYPER GO LANCIA DELTA HF INTEGRALE
• Model Number: 21109
• Remote Control: Included
• Power Source: 7.4V Li-Po battery for the model (included), Two 1.5V AA batteries for the remote control (not included)

Product Usage Instructions

Safety and Hazard Warnings

Always keep your fingers away from the drive parts and other moving components to avoid injury. Allow the motor to cool for 10-15 minutes after use before touching it to prevent burn injuries.

Battery Notice & Disposal

Dispose of batteries properly by placing them in designated recycling facilities. Do not dispose of batteries in local household garbage. Visit amewi.com for more information on proper disposal methods.

Important Notes

This product is not a toy and contains small parts. It is not suitable for children under 14 years of age. Follow strict performance guidelines and safety standards while operating the model. The manufacturer is not liable for accidents caused by abnormal parts, excessive wear, improper assembly, or operation.

Precautions

Avoid using the model in rain, snow, or thunderstorms as liquid damage can be irreparable. Operate the model only in visible environments to prevent signal interference. Do not use the model near crowds, public places, rivers, ponds, or lakes.

FAQ

Q: What type of batteries does the model require?

A: The model requires a 7.4V Li-Po battery (included) and two 1.5V AA batteries for the remote control (not included).

Q: Can children under 14 years of age operate this product?

A: No, this product is not suitable for children under 14 years due to small parts and safety considerations.

Welcome to AMEWI
The Amewi Trade GmbH is an international import- and wholesale company for R/C models, toys and creative items, located in Borchen near Paderborn, Germany. Our product range includes over 10,000 items. Above all, this includes remote- controlled car, helicopter, boat, and tank models as well as a wide range of accessories and all necessary spare parts. Our sales network includes over 700 specialist dealer and online retailers across Europe.
The company AMEWI Trade GmbH is a pure wholesale company. We only sell our products to retailers. When you purchase AMEWI products as an end consumer, you are entering into a contract with the retailer. Please always contact your dealer in warranty cases.

AMEWI Trade GmbH Nikolaus-Otto-Str. 18 33178 Borchen Germany
Servicezeiten: Dienstag 9:30 – 12:00 Uhr | Donnerstag 14:00 – 16:30 Uhr
Telefon: +49 180 5009821 (Festnetz 14Ct/Min., Mobil max. 42Ct/Min.)
Support: https://amewi.com

DECLARATION OF CONFORMITY

This product has been manufactured according to actual technical standards. The product is matching the requirements of the existing European and national guidelines. The Declaration of Conformity has been proofed. AMEWI Trade GmbH declares that this product is matching the basic requirements and remaining regulations of the guideline 2014/53/EU {RED). The declarations and documents are stored at the manufacturer and can be requested and applied there. https://amewi.com/Konformitaetserklaerungen For additional questions to the product and conformity please contact:
Amewi Trade GmbH Nikolaus-Otto-Str. 18, 33178 Borchen Germany or website https://amewi.com.

SECURITY AND HAZARD WARNINGS

• For damage, caused by disregarding of the manual, warranty expires.
• We are not liable for secondary failures, material, or personal damage, caused by in proper usage or disregarding the security notices.
• Based on security and registration (CE) reasons, it is forbidden to modify the product personally. Do not disassemble the product.
• Small parts. Danger of suffocation or risk of injury caused by small parts.
• Suitable for people aged 14+!
• The product is not allowed to get moist or wet. The product is only allowed to be used on flat and clean surfaces. Even a drop down from a small height can cause damage to the product.

BATTERY NOTICE & DISPOSAL

• Batteries / rechargeable batteries do not belong in the hands of children.
• Batteries or rechargeable batteries may only be changed by an adult. Never mix rechargeable batteries with dry batteries. Never mix full batteries with half-empty batteries. Never mix rechargeable batteries of different capacities. Never attempt to charge dry batteries. Ensure correct polarity. Defective rechargeable batteries/batteries must be disposed of properly (hazardous waste). Never carry out the charging process unsupervised. If you have any questions about the charging time, read the operating instructions or contact the manufacturer.
• Read the safety instructions and warnings before using or charging the Li-ion battery.
• Stop using or charging immediately if the battery is leaking, has a temperature of over 70° C or anything else unusual occurs. Always charge and store batteries on a fireproof surface or in a fireproof LiPo bag.
• Only use a qualified and specific Li-Po/Li-Ion charger for Li-Po/Li-Ion batteries or NiMH charger for NiMH batteries. Never charge the battery unattended. Do not charge the battery if the charging process exceeds 4.2 V / cell. Do not charge the battery with a charging current above 2C. Please check and ensure that you are using a qualified charger. An unqualified charger may cause a fire. Do not discharge the battery with a current that exceeds the maximum discharge current. Otherwise, this will cause the battery to overheat. This can lead to bursting, fire or explosion.
• Never disassemble, puncture, knock, drop, short-circuit and/or throw the battery into a fire.
• Improper use such as short-circuiting or overcharging can lead to explosions or fire.
• Store the battery in a safe place where infants or children cannot reach it.
• The above indicates the danger of using the battery. The user assumes full responsibility for the result of using the battery. Please be sure to observe our safety instructions which you can find online at
  https://amewi.com/downloads/manuals/Akku-Sicherheitshinweise.pdf

DISPOSAL

AMEWI is registered below the Bat-Reg.-No. DE 77735153 and WEEE-Reg.-No. 93834722 at the foundation EAR and recycles all used electronic parts properly. Electric and electronic products are not allowed to put in household garbage. Please dispose the product at the end of the lifetime according to the actual laws. You as a customer are responsible by law for the return of all used batteries, a disposal over household garbage is forbidden! Batteries containing hazardous substances are marked with the alongside symbols, which point to the prohibition of disposal in household garbage.
Additional notations for the critical heavy metal are Cd=Cadmium, Hg=Quicksilver, Pb=lead {Label is placed on the batteries, for example below the bottom left trash symbols).

• Based on RoHS labelling the manufacturer confirms, that all limit values were taken care of at the time of manufacturing.

• Batteries labelled with the recycling symbol can be put into used battery collecting tank.
  (Most supermarkets have)
  They are not allowed to be put into local household garbage.

• All used boxes are collected from partner companies (waste disposal contractor) at private customers (local households), sorted and properly utilized. The involvement in Dual Systems helps to save C02 Emissions.

THANK YOU

Thank you for purchasing the Hyper Go Lacia Delta HF Integrale. Please read the instruction manual carefully and keep it for future reference.

WARNING

• This remote-controlled model is not a toy. It consists of many small parts and is not suitable for children under 14 years.
• Two 1.5V AA batteries are required for the remote control.
• A 7,4V Li-Po battery is used for the model (included).
• Always keep your fingers away from the drive parts and other moving parts to avoid injury.
• The model’s motor gets very hot. To avoid burn injuries, allow the motor to cool for 10-15 minutes after use before touching it.

ON INAPPROPRIATE USE OF THE PRODUCT

Please do not disassemble or modify the model in any way. Do not use this product improperly or illegally and do not operate it in a manner that could endanger others or yourself.

MAXIMUM TRANSMITTING POWER DATA

• Operation Frequency: 2448 – 2475 MHz
• Maximum Radio Frequency power: Maximum peak power -11,2dBm

IMPORTANT NOTES

Note: This product is manufactured according to strict performance guidelines and complies with safety standards and requirements. This product is not suitable for children under 14 years of age. The manufacturer is not liable for any injury or accident caused using abnormal parts, excessive wear and tear, improper assembly, or operation. Please operate this product safely and responsibly.

PRECAUTIONS

• Please read the following safety information before using the model.
• Please do not use the model in rain, snow, or thunderstorms. If liquid enters the electronics, they may be irreparably damaged. Please do not use the model in an environment that you cannot see.
• Signal interference can cause the model to go out of control. Please do not use the model in the following places:

NSTRUCTION MANUAL HYPER GO LANCIA DELTA HF INTEGRALE

• Please do not operate the model if you are tired or unwell, have drunk alcohol or taken drugs – this may cause injury to yourself or others.
• To avoid burns, never touch drive parts and motors during or immediately after use as they can be very hot.
• Incorrect operation of the transmitter can cause injury to you or others. Be sure to familiarize yourself with the operation before using the model.
• Check the model and the remote control before use. Check screws to make sure they are tight.
• When you have finished using the model, always switch off the model first and then the remote control. Otherwise, the model may get out of control.
• If the model gets out of range, it may get out of control. Please always stay close to the model with the transmitter.

IMPORTANT NOTES

THE POWER SWITCH

1. Turn on the power switch of the transmitter, the signal indicator of transmitter flashes.
2. Press the power button of the esc in the car, the indicator light flashes.
3. When the indicator lights stay on, the connection is established.

• ATTENTION: Do not operate the throttle trigger or the steering wheel while the remote control is switched on. Do not operate the remote control until the indicator light is permanently staying on.
• Always switch on the remote control first, then the esc in the car. After playing, always switch off the esc in the vehicle first, then the remote control.
• If you are with more than one car of the same type, make sure you do the binding separately, as it may happen that one vehicle binds with another remote control or there may be interference.

THE RECEIVER

WARNING! Make sure that all components are connected to the correct terminal. Also make sure that the polarity is correct.
(black/brown = minus, red = plus, white/yellow = signal)

THE GYRO

1. Gain
   Turn the potentiometer to the left or right to increase or decrease the intensity with which the gyro intervenes from 0 – 100%.

2. Reverse/Normal Switching
   To change the direction of the gyro, press the “SET” switch for three seconds. The LED changes from red to green or green to red. This means the changeover was successful. (Red LED = normal, green LED = reverse).

3. EPA (End Point Adjustment)
   Before setting, please make sure the gyro direction is the same as the direction of steering servo.

• a. Press and hold the “Set” button on Gyro and switch on the esc. Release the “Set” button again. (If you hold the button down for more than five seconds, the gyro will be reset to factory settings*). The red LED flashes as soon as the gyro is in setting mode.
• b. Now turn the steering wheel to the desired position to the left or right and press the “Set” button briefly to save the position. The green LED flashes.
• c. Now turn the steering wheel in the other direction to the desired position and press the “Set” button again. Now both LEDs flash for approx. two seconds and then light up permanently. The settings are now saved.
• Reset to factory setting: Press and hold the “Set” button on gyro and switch on the esc. Press and hold the “Set” button for five seconds until the red and green LEDs flash. The EPA setting is reset to the default value (1100us-1900us).
  LED| Status
  ---|---
   Power on fast flashing|  Gyro initialization (about 2 seconds)
   slow flashing| No Transmitter signal
   Red on|  Working, gyro direction is reverse.
   Green on|  Working, gyro direction is normal.
   Fast flashing| In EPA setting

BRUSHLESS ESC

• VCC:
  Power supply via battery: Supplies the same voltage as the connected battery. It can be used as a power supply for fans. Please ensure that the voltage of the fan is within the range of the battery used.

• BVD:
  Receivers with BVD function can be connected directly with an adapter cable, which is equivalent to connecting a battery.

THE REMOTE CONTROL

1. Steering servo trim

2. TH. TRIM
   Throttle trim

3. Power switch (OFF – 70% TH – 100% TH)

4. Indicator light

5. CH1 (Steering)

6. CH2 (Throttle)

7. Fn (CH3 Light control)

THE REMOTE CONTROL

1. Steering servo trim
   If the car does not run straight ahead, it can be adjusted via the steering trim.

2. TH. TRIM
   Throttle trim
   If the car does not stop when the throttle is in the middle position, this can be adjusted via throttle trim.

3. Power/Speed switch

AUS – 70% maximale Geschwindigkeit – 100% maximale Geschwindigkeit
OFF – 70% throttle – 100% throttle

4. Indicator light
   LED| Status
   ---|---
   Stays on| Working well
   quick flashing| Frequency is matching
   slow flashing| Low battery of transmitter

5. CH1: Steering

6. CH2: Throttle

Brake: when the car is moving forward, push the throttle forward, the car brakes. To reverse, release the throttle to the neutral position and push it forward again.
When the car is in reverse, there is no brake function. Carefully pull the throttle lever backwards to stop the car.

7. CH3: Light Control
   Short press the “Fn“-button, to turn on/off the light of the car.

INSTALL TRANSMITTER BATTERIES

Open the battery compartment cover and insert two AA according to the direction shown. Close the battery compartment cover again.

CHARGING BATTERY

If you charge the vehicle battery with a 5V 2A USB mains adapter, the charging time is approx. 240 minutes. During the charging process, the green charging LED flashes. When the charging process is finished, the LED lights up continuously.

INSTALL THE DUST-PROOF COVER

• Align the three holes of the cover with the bracket and install.

• Insert the three body clips to lock the cover.

• Align the four holes of the body with the bracket and install.

• Insert the four body clips to lock the body.

STICKER ATTACHMENT

© Copyright 2024 AMEWI Trade GmbH

References

• Ferngesteuerte Fahrzeuge, Boote, Flugzeuge, Hubschrauber und Panzer - amewi.com
• Ferngesteuerte Fahrzeuge, Boote, Flugzeuge, Hubschrauber und Panzer - amewi.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>