PATCHING PANDA BDZ Kit Advanced Bass Drum Generator User Manual
- October 30, 2023
- PATCHING PANDA
Table of Contents
BDZ Kit Advanced Bass Drum Generator
User Manual
BDZ Kit Advanced Bass Drum Generator
COMPLEX GRADE •
This is a quite complex build. Please read all out to be aware to make this
assembly as easy as possible. Follow the steps carefully. If you make an error
soldering the hardware it will be very hard to fix it if you are not an
experienced DlYer. Some components are tricky to align and solder. Please
double check. 
FOLLOW THIS STEPS FOR BUILDING THIS KIT
-
Beware! Solder the trimmers and the female sockets for the mini-PCB at the back of the main PCB. The SILKSCREEN of those components is incorrect.
-
Solder the 100nF cap and the -5V regulator as shown.
-
Screw the metal spacers and solder the power male connector.
-
Straighten up the bracket.
-
With a multimeter check LED colour, place the blue one on the left side, the orange one on the right side. Check the polarity of the LED’s, long leg goes to the positive. Same with the polarity of the button.
-
Place the rest of the hardware, screw the panel, DO NOT SOLDER YET.
-
Pull the LED’s to the bottom, align the panel with the hardware, check the pots are pulled up, continue with the soldering.
-
Place the mini-PCB with the mark to the left.
-
The trimmer on the right will calibrate Cl and the trimmer on the left C9. Continue with calibration.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>