LENNOX CORE Service App Wired Thermostat Mode Instructions
- October 30, 2023
- Lennox
Table of Contents
**LENNOX CORE Service App Wired Thermostat Mode Instructions
**
Applies to Lennox Model L and Enlight Rooftop Units 3-25 tons
Helpful Resources
- Installation and service literature on LennoxCommercial.com or LennoxPros.com.
- CORE Service App Reference Guide.
- CORE Service Curriculum on LennoxPros.com.
- Lennox Model L and CORE Control System videos
Requirements
- iOS or Android device – phone or tablet with Android 6.0 (Marshmallow) or iOS version 11 minimum. Android hardware requires 2GB RAM and a 2GHz Core processor.
- CORE Service App found at the appropriate App Store or at the following QRs:
Wired Thermostat mode is used when 24vac is applied to the thermostat inputs for control. 24vac will originate from the ‘R’ terminal within the SmartWire connection array and will be switched by either a conventional thermostat or building automation system for control – applying 24vac to the G, W1, W2, Y1, Y2, OCP, DI-4 inputs.
The technician will use the Network Integration wizard to set up the
controller for wired thermostat mode.
Excerpt below from CORE Service App Reference Guide . Further instructions are
included in the guide.
Self-Service Technical Support with No Wait Times
Click on the black logos below to download these apps
Download all Training Toolbox Tips
Register for Technical Training Webinars
References
- Commercial Air Conditioning & Heating Units | Lennox Commercial
- LennoxPros - HVAC Lennox Supplier | LennoxPROs.com
- Commercial Air Conditioning & Heating Units | Lennox Commercial
- bit.ly/3Gy5uKH
- Lennox Commercial Technical Training
- Commercial Training Toolbox Tips
- Error during processing.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>