Envio Security IESS-BFP60H200-W Full Color Series Installation Guide
- October 30, 2023
- Envio Security
Table of Contents
Full Color Series | IESS-BFP60H200-W
IESS-BFP60H200-W
2MP Bullet Full Color Network Camera
Technical Specification
Camera
| System | Embedded RTOS, dual-core 32bit DSP(XM530AI) |
|---|---|
| Image Sensor | 2MP 1/3″ Black light illumination CMOS sensor |
| Video compression | H264 / H265 / H265+ / H265AI |
| Minimum Illumination | color 0.0001Lux@F1.2,black/white 0.0001Lux@F1.2 |
| IR Distance | 30m |
| IR On/Off Control | Auto / Manual |
| IR LEDs | 4 Warm White Leds |
Lens
| Lens Type | Fixed Lens |
|---|---|
| Focal Length | 2.8mm |
| Angle of View | 86° |
| Focus Control | N/A |
Video
| Resolution | 1920×1080 |
|---|---|
| Video Output | Main stream: 19201080@25fps,1280720@25fps; sub-stream: |
704*576@25fps;
Record| N/D
Network
| Interface | 1*RJ45 10/100M adaptive port;RTSP/FTP/DHCP/NTP/UPnP |
|---|---|
| ONVIF | 2.4 |
| Mobile Monitor | XMEYE/XMEYE PRO (iOS,Adroid) |
| Detect | Human Detect/Face Detect/Video Analysis |
| Noise Reduction | 2D/3D |
| White Balance | Auto / Manual |
| Audio | N/D |
| Electrical | |
| --- | --- |
| Power Supply | 12V DC ±30% / POE IEEE802.3af |
| Power Consumation | Max 3.6W (Leds on) |
| Environment | |
| IP Protection | IP65 |
| Construction | |
| Housing | Plastic (ABS) |
| Dimensions / Weight | 178mm×70mmx68mm/ 200gr |
Warnings & Precautions
ear Customer, we thank you for choosing one of our products whose correct use guarantees solutions of the highest quality and reliability over time. This manual provides instructions for using the product.
Connections
Connect the camera to the router and plug in the power cable (12V at least 1A). You can also power the cam with POE (IEEE.802.3af)
Installation
The bullet cameras are equipped with an integrated bracket for wall mounting, specially designed to allow the passage of cables inside it and protect them from tampering attempts. The camera is generally mounted at the cable outlet so as not to leave exposed cables. However, the fixing base also has a lateral cable outlet slot if the cables come from the side in the external duct. The bracket must be fixed to the wall or ceiling with theplugs provided
Network High Definition
- 1/3″ Black light illumination CMOS sensor
- 2 MP (1920X1080)
- 2.8mm Fixed lens
- Maximum Led distance 30m
- Human Detect/Face Detect/Video Analysis
- 12VDC/POE IEEE802.3af
- Onvif 2.4
- H254/H265/H265+/H265AI
- 4 Warm White LEDs
Framing adjustment
Once fixed correctly to the wall / ceiling, point it in the desired direction and lock it (may vary from model to model) by tightening the screws with the Allen key provided. Fixed lens cameras do not require focusing as they are factory set for most applications. To ensure optimum image quality, do not install the camera too close to strong light sources or in places subject to light reflections that could compromise the correct view of the camera.
Configuration
Connect the camera to the router and plug in the power cable (12V at least
1A). You can power the camera in POE (IEEE.802.3af), if the camera model is
equipped with POE.
Download the “Device Manager” software from the website
www.enviosecurity.com and install it on the
PC.
Once the software is open, press the “IP Search” button (1). Select the IP
address shown by the software (2), and modify the IP address of the camera
(3), taking care to enter an IP address with the same subnet as your router,
enter the relevant network mask and IP address of the gateway.
Finally, press the “Modify” button (4) to save the settings. The software will
show a “successful change” message.
Open Internet Explorer (we suggest using I.E. starting from version 10) Set up
ActiveX controls before accessing the camera (Go to Internet option, select
Security tab, select custom level and configure the ActiveX control settings
as shown in the figure.
In the Internet Explorer address bar, enter the IP address of the camera
http://192.168.1.10
Select “Allow”, when Internet Explorer asks for permission to install ActiveX
controls
Enter your login credentials:
user: admin
password: (no password)
For the full manual visit
www.enviosecurity.com
Web: www.enviosecurity.com