Envio Security IESS-BFM60H300-WM 3MP Bullet Full Color Network Camera User Manual
- October 30, 2023
- Envio Security
Table of Contents
Full Color Series | IESS-BFM60H300-W
IESS-BFM60H300-WM
3MP Bullet Full Color Network Camera
Technical Specification
Camera
| System | Embedded RTOS, dual-core 32bit DSP(GK7205V200) |
|---|---|
| Image Sensor | 2304(H)×1296(V), 3MP 1/2.8″ Black light illumination CMOS |
Sensor
Video compression| H264 / H265 / H265+
Minimum Illumination| color 0.0001Lux@F1.2, black/white 0.0001Lux@F1.2
IR Distance| 30m
IR On/Off Control| Auto / Manual
LEDs| 4 Warm White Leds
Lens
| Lens Type | Fixed Lens |
|---|---|
| Focal Length | 2.8mm |
| Angle of View | 86° |
| Focus Control | N/A |
Video
| Resolution | 2304×1296 |
|---|---|
| Video Output | Main stream: 3MP 23041296@20fps/2MP 19201080@25fps; sub- |
stream: 800*448@25fps;
Record| N/D
Network
| Interface | 1*RJ45 10/100M adaptive port; RTSP/FTP/DHCP/NTP/UPnP |
|---|---|
| ONVIF | 2.4 |
| Mobile Monitor | XMEYE/XMEYE PRO (iOS,Adroid) |
| Detect | Human Detect/Face Detect/Video Analysis |
| Noise Reduction | 2D/3D |
| White Balance | Auto / Manual |
| Audio | N/D |
Electrical
| Power Supply | 12V DC ±30% / POE IEEE802.3af |
|---|---|
| Power Consumation | Max 3.6W (Leds on) |
Environment
| IP Protection | IP65 |
|---|
Construction
| Housing | Plastic |
|---|---|
| Dimensions / Weight | 178mm×70mmx68mm |
1 Warnings & Precautions
ear Customer, we thank you for choosing one of our products whose correct use
guarantees solutions of the highest quality and reliability over time. This
manual provides instructions for using the product.
2 Connections
Connect the camera to the router and plug in the power cable (12V at least
1A). You can also power the cam with POE (IEEE.802.3af)
3 Installation
The bullet cameras are equipped with an integrated bracket for wall mounting,
specially designed to allow the passage of cables inside it and protect them
from tampering attempts. The camera is generally mounted at the cable outlet
so as not to leave exposed cables. However, the fixing base also has a lateral
cable outlet slot if the cables come from the side in the external duct. The
bracket must be fixed to the wall or ceiling with the plugs provided
Network High Definition
- 1/2.8″ Black light illumination CMOS sensor
- 3MP (2304*1296)
- 2.8mm Fixed lens
- Maximum Led distance 30m
- Human Detect/Face detect/Video Analysis
- 12VDC/POE IEEE802.3af
- Onvif 2.4
- H264/H265/H265+
- 4 Warm White LEDs
4 Framing adjustment
Once fixed correctly to the wall / ceiling, point it in the desired direction
and lock it (may vary from model to model) by tightening the screws with the
Allen key provided. Fixed lens cameras do not require focusing as they are
factory set for most applications. To ensure optimum image quality, do not
install the camera too close to strong light sources or in places subject to
light reflections that could compromise the correct view of the camera.
5 Configuration
Connect the camera to the router and plug in the power cable (12V at least
1A). You can power the camera in POE (IEEE.802.3af), if the camera model is
equipped with POE.
Download the “Device Manager” software from the website
www.enviosecurity.com and install it on the
PC. Once the software is open, press the “IP Search” button (1). Select the IP
address shown by the software (2), and modify the IP address of the camera
(3), taking care to enter an IP address with the same subnet as your router,
enter the relevant network mask and IP address of the gateway.
Finally, press the “Modify” button (4) to save the settings. The software will
show a “successful change” message.
Open Internet Explorer (we suggest using I.E. starting from version 10)
Set up ActiveX controls before accessing the camera (Go to Internet option,
select Security tab, select custom level and configure the ActiveX control
settings as shown in the figure.
In
the Internet Explorer address bar, enter the IP address of the camera
http://192.168.1.10 Select “Allow”, when Internet Explorer asks for permission
to install ActiveX controls
Enter your login credentials:
user: admin
password: (no password)
For the full manual visitwww.enviosecurity.com