AQUAJOE AJYP101 Yardguard Pest Deterrent Sprinkler User Guide

AJYP101 Yardguard Pest Deterrent Sprinkler
User Guide

If you have any questions or comments, please call the Snow Joe® + Sun Joe® customer service department at: 1-866-SNOWJOE (1-866-766-9563)

Know Your Pest Deterrent Sprinkler

Read the owner’s manual and safety rules carefully before using your Pest Deterrent Sprinkler.
Compare the illustration below to the actual unit in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future  reference.

10. Step spike

Technical Data

Power Source ………………………… Solar + Battery
Detection Field of View …………………………… 120º
Max Motion Detection Range ………… 40 ft (12 m)
Batteries ……………………………… AAA Ni-MH (x4)
Spray Patterns …………………………………. Jet–Mist
Animal Detection Modes
…………………………………….. 10 – 16 ft (3 – 5 m)
Large-sized Animals
………………………………….. 26 – 33 ft (8 – 10 m)
Medium-sized Animals
……………….. 33 – 39 ft (10 – 12 m) All Animals
Max Coverage ………………….. 5700 sq ft (530 m2 )
Max Spray Distance ………………………42 ft (13 m)
Max Pressure ………………………….. 100 PSI (7 bar)
Max Flow* ………………………………………… 52 GPM
Max Rotation ………………………………………… 360º
Height ……………………………………… 23 in. (58 cm)
Base …………………………………………… Step Spike
Net Weight ……………………………… 1.3 lbs (0.6 kg)

• Max Coverage, Max Spray Distance and Max Flow metrics are based on a water pressure of 100 PSI.

Unpacking

Carton Contents

• Sprinkler head

• Sprinkler connector

• Sensor housing

• Post

• Step spike

• Hose quick-connector

• Optional predator sticker

• Manual and registration card

• Hose-end connector

• Extended spike
  1. Carefully remove the pest deterrent sprinkler and check to see that all of the above items are supplied.

• Inspect the product carefully to make sure no breakage or damage occurred during shipping. If you find damaged or missing parts, DO NOT return the unit to the store.  Please call the Snow Joe® + Sun Joe® customer service center at 1-866-SNOWJOE (1-866-766-9563).

NOTE: Do not discard the shipping carton and packaging materials until you are ready to use your new pest deterrent sprinkler. The packaging is made of recyclable  materials. Properly dispose of these materials in accordance with local regulations.
IMPORTANT! The equipment and packaging materials are not toys. Do not let children play with plastic bags, foils, or small parts. These items can be swallowed and pose a suffocation risk!

Assembly

No Tools Required

1. Set the detection mode to . Open the battery cover (located under the sensor housing), then snap the battery case onto the battery clip connector (Fig. 1) and close the  battery cap clockwise until the click sounds (Fig. 2).
   WARNING! Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes,  additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. may cause irritation or burns.
   WARNING! Do not use a battery pack or appliance that is damaged or modified.
   Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
   WARNING! Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 265°F may cause explosion.
   

2. Run a dry test by turning the detection mode to and wave your hand in front of the sensor lens. You should clearly hear the internal water valve click open, then click closed 3 seconds later.
   If this does not work, try a new battery. The sprinkler resets 8 seconds after the valve closes if the sensor does not detect any further motion.

3. Follow (Fig. 3) to assemble your pest deterrent sprinkler. These fittings should only be hand-tightened. No tools are required.
   

4. Thread the quick-connector onto the water inlet of the step spike, then attach the hose-end connector to the male end of the garden hose. Insert the hose-end connector to the quick-connector until hear the click sound. (Fig.4)
   

5. Drive the step spike into soft terrain such as soil, gravel or sand by putting your body weight onto the foot pedal. If needed, use an extended spike to keep the sprinkler more upright and stable. Refer to Fig. 5 to install extended spike.
   

FRAGILE! Do not push down on the sensor housing or sprinkler head. If the ground is too hard or unsuitable for the ABS plastic step spike, try placing the sprinkler in  a flower pot filled with a weighted material like sand or gravel.
Daisy-Chaining
If you have more than one pest deterrent sprinkler, you can daisy-chain them up in a series by removing the flow-through cap and connecting them together with a hose (Fig. 6).

Sticker Sheet (optional)
As an extra deterrent, apply the optional predator stickers onto the sensor housing (Fig. 7).

Operation

Detection Modes
To avoid getting wet, you can calibrate your desired detection mode without turning on the water as long as you can hear the activation click from 33 ft (10 m) away.

1. Set the desired detection mode using the detection + sprinkler mode dial (Fig. 8) based on the chart below.
   Mode| Distance| Animals
   ---|---|---
   | 10 – 16 ft (3 – 5 m)| Large-Sized Animals
   | 26 – 33 ft (8 – 10 m)| Medium-Sized Animals
   | 33 – 39 ft (10 – 12 m)| All Animals

2. The pest deterrent sprinkler has a field of view of 120º. Position the motion sensor lens based on your desired coverage area (Fig. 9).
   

Sprinkler Modes
To use your pest deterrent sprinkler as a regular sprinkler, you can set 10/20/30 minute autospray timers, after which it will stop (Fig. 8).

Activation Modes
The pest deterrent sprinkler has 4 activation modes: – Off, I – Always On, – Day Time and – Night Time (Fig. 10).

NOTE: The pest deterrent sprinkler automatically reduces its sensitivity after 5 minutes in order to preserve battery life. To minimize false triggers, avoid pointing it towards  moving objects, windy areas or very large areas.

Water Coverage

NOTE: Turn the water on and test from behind unless you want to get wet!
After setting up and positioning your pest deterrent sprinkler, you may wish to adjust the rotation, distance and arc of the sprinkler.

1. Position the trip lever towards the area you wish to protect. Turn the friction collars on either side of the trip lever to control the sprinkler’s angle of rotation, between 0º – 300º (Fig. 11).
   

2. Flip the trip lever up out of the way of the friction collars to achieve full 360º rotation (Fig. 12).
   

3. To increase the sprinkler’s spray distance, raise the deflector shield and turn the distance control knob clockwise simultaneously. To decrease spray distance, lower the  deflector shield and turn the distance control knob counter-clockwise simultaneously (Fig. 13).

4. To vary the spray pattern, turn the diffuser screw clockwise to adjust the spray from narrow jet to wide mist and vise versa (Fig. 13).
   

NOTE: The spray distance will depend heavily on your water pressure. Do not exceed this product’s maximum rated pressure of 100 PSI.
Watering Tips
Water only when necessary, preferably in the morning to minimize water loss through evaporation.
CAUTION! Poor placement or malfunctioning sprinklers carry a risk of causing water damage to your property. Mitigate risks by limiting the amount of water available to  the product (open valve 3/4), use good quality hoses and ensure there is adequate drainage in the area. Install a pressure reducing valve on your tap if your water pressure  exceeds 100 PSI. Partially opening your tap does NOT change the water pressure.

Maintenance

Since water expands when it freezes, completely drain water from your sprinkler and hose to avoid damage if temperature falls below 32º F (0º C).
CAUTION! Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
CAUTION! Do not modify or attempt to repair the appliance or the battery pack (as applicable) except as indicated in the instructions for use and care.
Service + Support If your Aqua Joe® AJYP101 YardGuard
Pest Deterrent Sprinkler requires service or maintenance, please call Snow Joe® + Sun Joe® customer service at 1-866-SNOWJOE (1-866766-9563) for assistance.

Model + Serial Numbers
When contacting the company or arranging service from an authorized dealer, you will need to provide the model and serial numbers, which can be found on the registration  card. Copy these numbers into the space provided below.

SNOW JOE® + SUN JOE® CUSTOMER PROMISE

ABOVE ALL ELSE, Snow Joe, LLC (“Snow Joe”) is dedicated to you, our customer. We strive to make your experience as pleasant as possible. Unfortunately, there are  times when a Snow Joe ® , Sun Joe® , or Aqua Joe® product (“Product”) does not work or breaks under normal operating conditions. We think it’s important that you know what you can expect from us. That’s why we have a Limited Warranty (“Warranty”) for our Products.

OUR WARRANTY:
Snow Joe warrants new, genuine, powered and non-powered Products to be free from defects in material or workmanship when used for ordinary household use for a period  of two years from the date of purchase by the original, end-user purchaser when purchased from Snow Joe or from one of Snow Joe’s authorized sellers with proof of  purchase. Because Snow Joe is unable to control the quality of its Products sold by unauthorized sellers, unless otherwise prohibited by law, this Warranty does not cover Products purchased from unauthorized sellers. If your Product does not work or there’s an issue with a specific part that is covered by the terms of this Warranty, Snow Joe  will elect to either (1) send you a free replacement part, (2) replace the Product with a new or comparable product at no charge, or (3) repair the Product. How cool is that!
This Warranty gives you specific legal rights, and you may also have other rights which vary from State to State.
PRODUCT REGISTRATION:
Snow Joe strongly encourages you to register your Product. You can register online at snowjoe.com/register, or by printing and mailing in a registration card available online  from our website, or calling our Customer Service Department at 1-866-SNOWJOE (1-866-766-9563), or by e-mailing us at help@snowjoe.com. Failure to register your  Product will not diminish your warranty rights. However, registering your Product will allow Snow Joe to better serve you with any of your customer service needs.
WHO CAN SEEK LIMITED WARRANTY COVERAGE:
This Warranty is extended by Snow Joe to the original purchaser and original owner of the Product.
WHAT IS NOT COVERED?
This Warranty does not apply if the Product has been used commercially or for non-household or rental applications. This Warranty also does not apply if the Product was  purchased from an unauthorized seller. This Warranty also does not cover cosmetic changes that do not affect performance. Wearing parts like belts, augers, chains and tines  are not covered under this Warranty, and can be purchased at snowjoe.com or by calling 1-866-SNOWJOE (1-866-766-9563).

Instrucciones originales.
© 2022 Snow Joe, LLC. Derechos reservados.

Documents / Resources

| AQUAJOE AJYP101 Yardguard Pest Deterrent Sprinkler [pdf] User Guide
SJ-AJYP101-880E-M-FTY, AJYP101 Yardguard Pest Deterrent Sprinkler, AJYP101, AJYP101 Deterrent Sprinkler, Yardguard Pest Deterrent Sprinkler, Pest Deterrent Sprinkler, Yardguard Sprinkler, Sprinkler
---|---

References

• Snow Joe: America's #1 Leader In Cordless Equipment, Pressure Washers & Snow Throwers
• Register Your Product | Product Registration For Your Snow Joe®, Sun Joe®, Aqua Joe®
• Snow Joe: America's #1 Leader In Cordless Equipment, Pressure Washers & Snow Throwers

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>